Printing in mirror image

I cannot not print in mirror image.  I have Microsoft word 2013 and cannot find rotate or drawing tool.  Can anyone help me?  I take this printer does not print mirror image which I am so shocked.  Didn't even think to look for this feature before purchasing cause most printers have this option.

You should find the Flip Horizontal option under Page Layout > Rotate.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • How do I print a mirror image?  Where did the old functionality go?

    Within the last several months I was able to print a mirror image of my document to my HP DeskJet F4180 in high resolution. I don't know if it is the new HP drivers, or my new Snow Leopard OS but now I can' figure out how to do it again. I can grab a screen shot in and flip it in Preview but it ends up printing in low resolution.
    I have printed mirror images in the past from my PDF applciations and I think from Office 2008 (PowerPoint). I find no documents saved on my hard drive that come up saved as a reverse image so I suspect that I was using a printer feature not an application feature to print mirror images.
    Where did this functionality go?

    Found it!
    Use the check box marked Flip Image. Didn't is say mirror before?

  • Printing in mirror image -- not sure why

    Hi there
    I had a problem suddenly develop -- I don't know if it's because I hit an unknown key combination or something, but everything I send to my printer from InDesign suddenly starting printing in mirror image.  It's not an issue in printing specs from the printer itself, I tried that.  The only way I've been able to solve it is to take what I've created on screen and flip it horizontally so it looks completely mirror-imaged, then print it.  It comes out correctly then.  Any ideas why this is happening?
    Thanks so much!
    Todd

    This is usually a setting in the printer driver, and I don't see anywhere in the ID print dialog itself where you could have set it, so click the Setup button in the dialog to open the printer driver settings. You'll need to find the "advanced" options, and from there look in Document Options > Postscript Options... and find the "mirrored output" setting and turn it off.
    Check the printer properties in the printer folder and make sure this isn't set as the default for some reason, too.
    Peter

  • Can I print a mirror image?

    I need to print a mirror image of a pdf document that was produced using a large scanner in our engineering department. We scan old sepias but the side we can scan is a negative image. Old copiers could "see through" the sepia's back side to get the positive image. New scanners, or least our scanner, can't do that so we get negative image pdf files. Printing a mirror image of this file will give me a positive image.
    Miles

    Have you tried checking the "Flip Horizontally" box on your print settings? Go to Print > Printer and it should be under "Layout". This may vary by printer but it's worth a try. Good luck.

  • HP Officejet 6600 e-all-in-o​ne print a mirror image

    Product Name - HP Officejet 6600 e-all-in-one
    Operating System - Windows 7
    Error message - none
    no changes
     Can I print a mirror image of something using the printer software - or do i need to have other software installed on my computer to do this?

    HI Sharmoser,
    Your printer doesn't support regular mirror image printing. You may can find a 3rd party software that could help you accomplish this but not from the HP software.
    Here is a link to your printers manual.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • How to stop Adobe Reader 9 from printing in mirror image on my Mac?

    How can I stop Adobe 9 Reader from printing in mirror image on my Mac?

    How can I stop Adobe 9 Reader from printing in mirror image on my Mac?

  • How to print the mirror image of a pdf file?

    Hi,
    Does anyone know if it is possible to print the mirror image of a pdf file? I could have sworn I have done this before in an older version of Acrobat.
    I am currently working with Adobe Acrobat 8.0 Professional.
    Thank you,
    Tina

    I just tested this and it worked fine for me.
    When you select to print the cropped page, in the print dialog will be a thumbnail of what is about to be printed. Does this display just the cropped portion or the whole page?

  • How do I print a mirror image in adobe reader

    How do I print a mirror image of a file saved in adobe reader?

    Not possible. I don't even think such a feature is available in Acrobat.
    You need some kind of image editing software (like Photoshop or Gimp) to do that.

  • I need to print a mirror image of a PDF on my iPad.  Is this possible?

    I need to print a mirror image of a PDF on my iPad for an iron on transfer.  Is this possible?  I have Pages and GoodReader but can't figure out how this would work on either app.  Help!

    Can't be done as an exact copy from one Mac to the other.  The operating systems are system specific. First make sure your system doesn't need a firmware update to get 10.2 or later on it. You'll need to install 9 on it if it does, direct from a 9 retail CD that is compatible with it *.  This disc can't say Upgrade, Dropin, or OEM. To determine compatibility, identify your G4 tower:
    http://support.apple.com/kb/HT3082
    http://docs.info.apple.com/article.html?artnum=42739
    Then look at the OS 9 compatibility:
    http://docs.info.apple.com/article.html?artnum=25517
    Then apply the correct update
    http://docs.info.apple.com/article.html?artnum=86117
    The last Mac OS 9 to come retail is 9.2.1, and that's newer than 9.0.4, 9.0.2, and 9.1.
    Your ghost image can be done using cloning software, but then you'll have to use a retail 10.3 installer and 10.3.9 combo update on the G4 tower.  Then use the Migration Assistant to import the data from the clone of the iBook. The 10.3 retail disc looks like * and does not say upgrade, dropin, or OEM.  The 10.3.9 combo update is here:
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    The clone to an external hard drive can be done with these instructions*:
    http://www.macmaps.com/backup.html The import of the external hard drive with the migration assistant can be done with these instructions:
    http://docs.info.apple.com/article.html?artnum=25773

  • Print in mirror image?

    Will I be able to command to printer? :  "print in mirror image" Purpose to print on transfer paper.
    thanks
    Mikes

    Some printers have the option in the print dialog. If yours doesn't, just filp the image first.
    You could have found similar posts with the same answer in the "more like this" box to the right of your post.

  • How do I print a mirror image

    How do I print a mirror image of a document or photo?

    Use Preview to make the mirror image and pring from Preview
    LN

  • Any way to print a mirror image anymore?

    The Mac used to have an option for printing a mirror image of your document. What happened to this? I need to be able to print a mirror image from Pages.
    Thanks!

    That's an option in some printers. None of my printers have ever had the option, but I've worked around it by flipping the image & text boxes in AppleWorks for years. You can do the same thing in the metrics inspector in Pages.
    Peggy

  • How do I print a mirror image using os x 10.8

    How do I print a mirror image from iPhoto in mountain lion?

    according to these wise *****>> AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    I will never update again!

  • Wireless laptop is printing in mirror image (backwards).

    Printer is connected to desktop computer and prints excellent.
    Laptop is wireless and on network and everything is printed in mirror image (backwards).
    I do not see any setting to change etc. Thanks in advance for your help. By email would be good and convenient.

    Hello! Could you please provide more information regarding the issue, such as which product you are using? Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • How do you print a mirror image?

    How do you print a mirror image?

    Or in the elements print window in older versions there's a checkbox right there. in the "improved" print window in recent versions it's under the more options button>printing choices>iron-on transfer>flip image.

Maybe you are looking for

  • How to get the item name from a column in an interactive report?

    I created an interactive report. Then on the same page I added a tabular form region. What I want to implement is that, when I click a column link button on a specific row, the name of the row will be passed to the tabular region, so that the tabular

  • Printer Compatible with 10.7.5

    I need help finding a printer that is compatible with my MacBook Pro - Version 10.7.5. All that I've been able to find are printers compatible with Version 10.6, in which I have to download drivers in order to connect the printer to my notebook. I'd

  • Need to Sync FROM Apple TV

    I have been using my Apple TV without syncing to a computer. I mean, there's TV episodes on it that are not saved on my iTunes Library. And my Apple TV is not seen in iTunes, although it is connected to my home network OK. How do I "safely" get Apple

  • PS CS3: cannot select object in layer with keystroke

    Hello. I've looked in various places and cannot find the answer to my question; perhaps I'm not asking using the proper description. I hope someone here in this forum understands and can help. In past versions of PS I've been able to select the objec

  • An error occurred while searching tasks from the SOA Server

    While clicking task tab in self service page i am getting "An error occurred while searching tasks from the SOA Server." even after sao server is up.