Printing in Pink

I am using acrobat pro 9.0 to print purchase requisitions. This is normally done on paper and carbon so we have a white copy and a pink copy.
We archive the pink copy. Currently i have to go to preferences,accessibilty,document colors to change the background.
I want to know if i can setup another driver or some faster way to print to pdf with a pink background when the original has a white background.
Is this possible? It would be a huge time saver.

If you have a printer with two feed trays you could simply use pink paper. Or you could just add pink paper to the current tray. Using pink paper would also save a lot of $$ on printer ink/toner.

Similar Messages

  • Printing in Pink only

    have hp deskjet 722c & prints in pink only. how do i fix? have repaced with new cart.

    So, if I understand correctly, both the old color cartridge and the new color cartridge have the same printing problem - it only prints pink (magenta).  If this is the case then you might try and clean the color cartridge electrical contacts in the printer.  Please reference the section on Cleaning the electrical contacts inside the carriage assembly . 
    If the old color cartridge and the new color cartridge behaved differently, you might try the soaking method described in the previous reply (note that while the discussion was on the black cartridge, it also applies to color).
    And be sure the cartridge is fully seated. 
    I work for HP.

  • My Canon MG8120 is printing in pink scale

    My printer was working fine.  In the middle of printing out a large photo it started printing in pink scale.  When i printed out the test sheet the cyan color did not print.  I removed the full cyan cartridge, swabbed the head with a q tip and replaced the catridge...still no change.  Help!

    Hello leighbeec.
    Unfortunately, if the issue persists after cleanings have been done, additional troubleshooting will have to be done to narrow down the cause of your issue.  Please contact our support group using the link below for additional assistance.
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My 3210 will not print in pink/magenta. photos and other pictures print in green tones.

    my 3210 will not print in pink/magenta.  photos and other pictures print in green tones.  i've seen posts clear back from 2011 with no replies or solutions.  if this is hp's definition of product support, i will be sure to choose a different manufacturer when purchasing my next printer ... which will be SOON.

    Hello @justjen ,
    Welcome to the HP forums.
    I understand that your Photosmart 3210 stopped printing magenta.
    I would like to help.
    Try going through the steps in the following document.
    Printed Colors Are Not the Colors Expected
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Photosmart 3210 won't print any pink/red colors

    Suddenly for no apparent reason, my Photosmart 3210 All-In-One just stopped printing with either the light or dark pink ink. I purchased brand new HP ink cartridges but no luck. The other colors are all working just fine. 

    OK now this is weird  My Photosmart 8250 is doing the same thing.  Photos have a greenish color to them no red.  I created a jpeg with a Red bar, a Green bar and a Blue bar saved it to a usb drive.  Plugged the usb drive in the printer.  The blue and green bar are fine, but the red bar prints as yellow.
    Printing from the usb drive eliminates any and all driver issues.  The print test and head cleaning all are fine.  I followed HP procedure to reset the printe     Replaced all ink cartridges. Nothing has helped.

  • Photosmart D110 not printing pink

    My pritner hasn't been printing the pink colors.  I went through the diagnostics on HP Print and Scan Doctor and everything, including my color levels, were fine.  I printed a test page and the pink block didn't show up.  As suggested, I cleaned the printheads.  Then when I reprinted the test page, none of the color blocks showed up.  Are there any fixes out there, or should I just get a new printer?

    Hello j-lu,
    Welcome to the HP Support Forums!
    I would not suggest replacing the D110a for this print quality issue, at least at this time. Since this printer uses the HP 60 cartridges, the printheads are part of the cartridge. Issues like yours are usually caused by the printheads, how many times have you ran the cleaning?
    I would suggest taking a look at this: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems, some steps will have been done already, I would suggest trying them again just to be safe. Trying a replacement cartridge would be the best troubleshooting step for you, if it fixes the issue contact HP to check the warranty status on the problem ink cartridge.
    If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Photosmart c4480 prints 2nd half of picture pink

    I put new non-hp ink cartridges in--documents in black and white print fine, but pictures print the first part of the picture correctly  but  about halfway thru the printing becomes pink. I've tried cleaning and testing the print; things seem fine. I don't know what else to do. Can anyone steer me in the right direction?

    Hello , Welcome to the HP Support Forums!
    I understand that since installing non-genuine cartridges in your HP Photosmart C4480 All-in-One Printer you have been experiencing print quality issues when printing in colour ink. I would like to assist you today with resolving this print quality issue. Keep in mind that the ink in non-genuine or refilled cartridges are not tested within your machine. Therefore, HP cannot guarantee the quality or reliability of non-HP ink cartridges or refilled ink cartridges. For your records,  QualityLogic, one of the world's foremost quality assurance organizations, tested the performance of HP inkjet print cartridges vs. remanufactured (refilled) brands. The results: original HP inkjet print cartridges far surpassed ink refills in both print quality and reliability. Nearly one out of every six refilled ink cartridges tested was dead on arrival or failed prematurely70% of refilled cartridges had some form of reliability problemCount on HP original ink cartridges for consistent, worry-free printing. You may think you're saving money on remanufactured or refilled ink cartridges, but in the long run, the cost of wasted time, ink, and paper can more than make up the difference.  - Source  With that being said, there are a few troubleshooting steps that I will have you perform to resolve this print quality issue.  Please click here to access the print quality troubleshooting steps. Once the support document opens please complete the listed solutions to resolve this quality issue. Once troubleshooting is complete please test printing to confirm that the issue has been resolved. Should the issue persist, you may need to try Genuine HP cartridges in your product.  Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck! : )

  • Why will my HP Photosmart C5100 not print red or pink?

    Photosmart C5100  stopped printing reds, pink, or magenta.  It worked fine earlier

    Hello lwilkin,
    Welcome to the HP Forums.
    I see that you are having some printing issues when attempting to print in colour.
    I do have a few steps that we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I have also located a document that deals with when the Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5520 and Des....
    Write me back and let me know how you made out.  If you have any other questions, please feel free to ask.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My photosmart is printing pink instead of red

    When printing from photoshop my printer is printing in pink something that is clearly red. I have cleaned the printhead and there is no change 

    printing from other apps ok? then check the color profile settings.

  • Hot pink printing out as red?

    I am running Illustrator CC version 17.1 on Windows 7 professional.    I designed some patterns using hot pink (CMYK 0/95/20/0) and when I export to JPG they print out as red.  When I export I'm changing it to RGB.  I think I read online that you can't print hot pink using CMYK or RGB because it's outside the gamut of those colors.   If that's the case, how do I get hot pink?

    HI Ann,
    First off, when you exported to JPG did it look correct? Are you printing only from Illustrator?
    Which printer are you printing to? If printing from Illustrator. In the print dialog box. Are you selecting Illustrator to determine the colors or the printer?
    If your printer is a CMYK printer. Then you would not need to change the colors to RGB. Try printing directly from Illustrator as CMYK.
    If you can provide details of which printer that you are using and which app that you are printing from. That would help.
    Thanks
    Scott

  • When i print i have pink lines across the full paper with the pictures color

    printer has pink lines

    Hi,
    Please provide more info about the issue like what is the model no. of printer, are they vetical or horizontal lines?
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Deskjet 632C only prints colors as pink- why?

    I've tried several new 78 cartridges with no avail.  All 'color' images in every program print as pink ONLY.
    Help??  MacOs 10.5.8  on a Powerbook G4
    printer connected via USB
    Uninstalled the printer and re-installed, but no help at all.
    Other drivers available besides the ones installed via Leopard DVD??

    Some suggestions here...
    http://www.fixyourownprinter.com/forums/inkjet/13694
    HP Deskjet 600, 600c, 610c, 630c, 632c, 640c, 642c, 648c, 660c, 670c, 680c, and 690c series printers
    Running a self-test
    Turn the printer on.
    Press and hold the RESUME button until the printer starts printing.
    Release the RESUME button.
    Running a clean-test
    Turn the printer on.
    Press and hold the POWER button.
    Press the RESUME button seven times.
    Release the POWER button.
    Running a diagnostic-test
    Regular
    Turn the printer on.
    Press and hold the POWER button.
    Press the RESUME button five times.
    Release the POWER button.
    Extended
    Turn the printer on.
    Press and hold the POWER button.
    Press the RESUME button twelve times.
    Release the POWER button.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpd07098# N206

  • Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

    Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

    Hi Equi_nut,
    Do you have the same printer as the user above? 

  • Printer with Mac

    Recently purchased new Mac with OS Yosemite; since then print color was off so have now changed all four ink cartridges with no improvement (prints out pink for photos, text ok in black). Also, stated it needs paper and I've put the paper in and out and back in multiple times but does not recognize paper is there. Help!

    Hi,
    Please use the following information to update software for your printer:
        http://support.hp.com/us-en/document/c04469325
    more info:
        http://support.hp.com/us-en/document/c04473034
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to design a "white" background in "black and white" ad on pink newsprint?

    Long-time Indesigner here, but I have never had this dilemma before. Am designing a "black and white" newpaper ad for a major paper that has a pink section, i.e. it prints on pink newsprint. So I know this is black ink only, hence the "black and white"...but when the "white of regular newsprint is pink, I am getting stumped. I see in their rate card ads with a white background and black ink on top of the pink newsprint, which is what I want to do. The ad has facial tones of a major recording artist, and I do not want the highlights of her face going pink. So how to I ad a "white" layer underneath this ad? Deadline is now, so please reply ASAP. I have inquiries into the paper but it is the weekend and nobody is getting back to me.

    Have they got a rate card: Check it! It may list a "white knockout advert" rate. I think:
    that to overprint adverts onto pink is limiting i think its a separation (unless they only want/cater for 1 colour (black) ads) unlike yellow pages where the the standard directory colours are blue, green, red and black (err... obv because of the yellow paper...) yellow pages also offer white knockout adverts (then yellow available) and CMYK adverts.
    So: you got to make sure that the advert is designed per spec: as you may know designing for newsprint is a lot more technical than gloss mags/sheet fed etc. You can always see in a newspaper who (designer) got it wrong.
    All the info should be on the rate card: just check the CI too: as white knockout may be a lot more expensive.
    G

Maybe you are looking for

  • ICal: january has dissapear!!!!!!

    The month of janury has dissapear from iCal in both my wife's macbook and my macbook pro (which are not sincronize). The main window and the preview window would jump from dec 2007 to february 2008. I can only get to jan 08 if i change my view to wee

  • Figure numbering AND paragraph numbering in the same document

    Hi everyone, I have a document with both figure numbering and paragraph numbering. So let say I am in section 4, then the first paragraph would be "4.1. Introduction" and the first picture would be "Figure 4.1: Cool pics". I created two different lis

  • I need to install Mac OS on a USB external HD, but can't find the OS installer...

    Hello, I recently installed Yosemite on my Macbook Pro, but then I got an integrity issue on my system HD. I need to repair this HD. But the recovery partition doesn't work (by the way, it's still OS 10.9, not 10.10...). So I would like to install Yo

  • Creating a custom file info panel

    Hi Can anybody help, I have a custom file info panel that works in cs4,but I need to add some further advanced functions that needs to be done in flex builder.I have little Knowledge of flex so I am asking if this can be imported into flex so I don't

  • Using a subselect in a procedure

    In my procedure, I want to use a subselect to get some of the values, but i want to hard code some of the others. This is what I mean This would be part of my insert statement for example. I want to set project_associate_oid to project_associate_oid.