Printing Indicator Icons in Primavera 6.2 Client Reports

Ok, bare with me since I am new to this forum. We are running Primavera 6.2 client as well as P6 web. Some of the reports that are being generated are in the Client and I am trying to have the indicator icons (red, green, yellow or blue) that display in a layout, print in a report instead of the wording "red", "green", etc.... Executive Staff wants to see colors and not words...
Is there any way to do this within Primavera Client?
Thanks

Greg,
Could you send me that sample report as well. I took your advice and actually created some simple circles (red, green and yellow). Inserted them into a report as a graphic and then created a filter. However, since the list of projects on the report are listed going down the page and the graphics are in a row across, if a project is marked as green then the next project is marked as red, the items don't line up since you can not overlay the graphics on top of each other so that they are centered.
Example (I want all of the status colors to be aligned under each other):
Project Name Funding Amount Project Overall Status
Primavera 1.5M O (this would be green)
Intel 10.8M O (this would be red)
Microsoft 25.2M O (green)
Does this make sense?
Thanks so much for your help....
Michelle

Similar Messages

How to Print an Icon (ICON_CHECKED) in the Smartform's Main Window's Table

Hi Smartform Gurus ...
I'm encountering a problem in Smartform. I'm creating a smartform for QM Module & I have to show the ACCEPTER & REJECTED Lots in that . At the Place of ACCEPTED, I want to show TICK MARK ICON (ICON_CHECKED in the table ICON) & at the place of REJECTED, I want to show CROSS ICON (ICON_INCOMPLETE in the table ICON) ... in SMARTFORM -> MAIN WINDOW -> TABLE ->MAIN AREA.
My mail id is : [email protected]
Please help asap.
Regards,
Mohit Grover.

I am not talking about only these two icons, i.e. CHECKED & UNCHECKED. I am asking generally about how to print any icon in smartform's table, as I want to print some more icons & I don't want to upload graphics first, through SE78 & then shows those as graphics instead of ICONS, because by using this practice, it'll not be used as a general purpose form that can be used with any client/customer.
Please help.
Regards,
Mohit Grover.

SSRS 2014 Printer Control Icon missing in Internet Explorer 11

I'm trying to determine what the latest status is with the printer control on Internet Explorer 11.
We have a Windows 2012 Server R2 running SQL 2014 and I've installed the latest report viewer distributable (2012 server.)
In IE 11 I still cannot see the printer control icon.
Is there a known, reliable fix for this or can I just assume that the printer icon is a pre-IE 11 feature?
Thank You!

Hi Bob,
Based on my understanding, printer button is not available when previewing the report in IE11.
In Reporting Service, each user who wants to use the print feature must download and install the ActiveX control that provides client print functionality. As we tested in our environment, with ActiveX control installed, the printer button is available in
IE11 (SSRS 2014 on Windows Server 2012 R2). So in your scenario, please check if you have installed Active control. If not, please enable the setting Download signed ActiveX controls in Internet Explorer, then you can install the required control. For more
information, please refer to steps below:
1.Click Tools -> Internet options.
2.Switch to the Security tab, select the Trusted sites zone, and then click
Sites.
3.Type the URL of Report Server, click Add, and then click
Close .
4.Click the Custom level button, scroll to the ActiveX controls and plug-ins node.
5.Click Enable for Download signed ActiveX controls, and then click
OK.
If issue persists, please check if value of EnableClientPrinting is True in SSMS. Please refer to the screenshot below:
Reference:
Enable and Disable Client-Side Printing for Reporting Services
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Looking for HP printer App/Icon to save on desktop

Hi - I am presently using Windows 8.1 operating system. In a previous version of Windows, I had installed a HP app/icon for printing photos and saved it on my desktop screen, the app looked like a picture of a "small HP printer" and it was very convenient when I wanted to print single photos on photo paper. After selecting my options on that printer app such as choosing a 2x3 or 4x6 size etc., I could select a photo and drag it to the printer app and it would automatically send a request to my printer to print that size photo. Now that I've installed the later version of Windows - (8.1), that printer app has disappeared from my desktop and I can't find out where to download it again. I do have a program installed called "HP Photo Creations" but that program only shows options to select 4x6 or 5x7 sizes etc., it does not give me the option to print a single 2x3 size photo. Anyone know where I could possibly download that small HP printer app/icon? I hope it's still available and can work on Windows 8.1, it really was soooo convenient.
This question was solved.
View Solution.

Hi @jank,
Welcome to the HP Support Forums. I understand that you are wondering if an app you used to have is still available for Windows 8.1.
The app you mention in your post predates my time with HP and I had to do some digging around. I was able to find out that at one time an app similar to the one you mentioned did exist, but no one I worked with was able to remember the name of it or how it worked. It appears that it is no longer available.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing indicator in mat. doc

Dear all,
When viewing a material document in MB03, it is found that the print indicator is selected, but none of the printing options: Individual Slip/Indiv.Slip w.Inspect.Text/Collective Slip is selected.
I just wonder how user could do so, as it is supposed that he has either select or not select the printing option in MIGO.
Is this a system bug?
Thanks in advance!

It is not a bug. some iuser would have ticked the print functionality while doing MIGO.
Thanks & regards,
Kiran

Progress indicator icon does not appear in Sap Portal

Hi experts.
Currently, i Have developed a WD ABAP which contains a progress indicator icon. When I execute this WD from backend (R/3 via SE80) the Icon progress appears while the WD is recovering data, building structure, etc...
The problem appears when I access to the scenary from SAP Portal, because from SAP Portal does not appear the Progress Icon. Someone can tell me why the icon is not appearing, and how Can i solve it???
Thank in advance.
Best regards

Hi Thomas.
First of all, thanks for your answer.
My problem is that I can obtain a progress indicator icon (a circle moving) when I am inside of my Ivew, but I need to show this icon also in the first step, during the initialization. The initialization of my scenary is a hard process which spent a lot of time, and I wonder if is possible show a Process indicator Icon while all data are being recovery. This icon is showed when I run my webdynpro in the Backend, but this icon does not appears qhen the new Internet Explorer Windows is opened.
Do you know how to show it???
Thanks again.

MIGO - NDR print indicator default to unchecked

We would like to default the 'print' box in MIGO to always be unchecked when a user goes into the transaction. There will be times when the user will check the box to print a label; however this will not be often. Today, if a user checks the box, backs out of MIGO, then goes back into MIGO the box remains checked. It's like it remembers whatever was set in that box previously.
We've tried playing with the user parameter of NDR being set to 'X' (capital), or being set to blank, but it's like the parameter is not being read at all. The screen is only remembering what we did last when we re-execute the transaction. We've also tried playing with the GET/SET parameters in SE51, program SAPLMIGO screen 0110 - but again no luck.
Am I missing something being set somewhere for the NDR parameter to be read? Any tricks to get this to always default to unchecked?
Thank you for the suggestions.

I worked with ABAP'ers and it looks like this change was already in the enhancement section:
Program: LMIGOKH1
ENHANCEMENT-POINT HEADER_DEFAULTS_SET_02 SPOTS ES_SAPLMIGO.
Set print indicator
GET PARAMETER ID 'NDR' FIELD ps_gohead-xnapr.
We also have this:
Program: LMIGOHG2
    CHECK lcl_migo_globals=>kernel->s_action-create = abap_true."       307284
     REPLACE
    SET PARAMETER ID 'NDR' FIELD gohead-xnapr.
The even more strange (frustrating) thing is that if we set a break point at the SET indicator in program LMIGOHG2, then the logic is picked up based on the user Parameter - not based on the last value that was entered. However, if a breakpoint is set at the "get" section - it does not work.
I may be sending this one to SAP. Thank you for your suggestions.

Print-Fax icon

My Print/Fax Icon is missing in the system preferences under hardware. How do I get that back?

dokc wrote:
My Print/Fax Icon is missing in the system preferences under hardware. How do I get that back?
In your user->Library->Preferences
you will find a file
com.apple.systempreferences.plist
Drag this file onto your desktop and reboot.
That usually fixes these things. If it does, trash the file you dregged to the desktop. You will have to reset your other preferences.

.error Print indicator 029 not defined. Message no. L3118.

error Print indicator 029 not defined. Message no. L3118
Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help.

Hello,
I am getting the same issue.
Please let me know the solution.

Printing of transfer order . error Print indicator 029 not defined.

Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help...

is 029 your warhouse?
if so then SAP found a record with print indicator "blank" , but this "blank" print indicator is not defined in OMLV.

MIGO,MB1B, print indicator should be default

Hello
MIGO and MB1B transcations, print indicator is not selecting automatically. why?
background:
In user profile (SU01D), paramater NDR was maintianed correctly.
eventhough user is having NDR parameter, but he is not able to see the print indicator automatically??
in additioon , if they give manually print indicator for individual slip /collective silp, out is saved. and output is displayed in green color in GR iteam leavel "Message" tab.It means output setting are correctly maintained.
even i tested with my user id..if i dlete the NDR to my id, it is not working.
again i added NDR parameter, now it is correctly.
Question: In production already user was maintained with NDR parameter, but he is not able to see the print automatically.
so shall i delete his NDR parameter once and add again?? this will be work or not ?? please confirm.
Regards,
Pabbati Obulesu

Hi,
NDR parameter value should be upper case X.
Pls check your user parameter.
Regards,
Renuga.A

Missing print preview icon in Shopping Cart status srm 5.0

Hello,
Some users don't have the print preview icon in the shopping cart status.
I checked attributes and authorization, but that isn't the problem as far as I can see.
b/c some users have this problem and others don't I don't have any idea what the problem might be.
every idea is welcome!!
thanks in advance
Jan Holland

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Print indicator assigned to the MM movement type 101 F ( GR for Production Order )

Hello!
I'd like to know how to assign a print indicator to the movement type GR for Production Order 101_F
When I use the IMG path : Material management/ Inventory Management and Physical Inventory/ Print Control/ Maintain Print Indicator for Goods Receipt Document, I can only assign the movement type 101 (Goods receipt) but not the movement 101_F.
Thank you for your help!
Charlotte

Hello Dev!
The movement 101 F is Goods Receipt for Production Order. The letter "F" corresponds to the movement indicator.
I'd like to dissociate the movements types 101 and 101_F to have only one printed label.
Regards,
Charlotte

HT5137 i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost colore to gray and stopped responding

i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost color to gray and stopped responding.? most of the pop up boxes will also not respond why?

Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay.

Add New Transaction code at OMBR - Version Print Indicator

Hello
I need to add one transaction in the Version Print Indicator List. I know it can be done.
Can any one guide me how to do, as "New entries" is grey there. ( To best of my knowledge it is done through some other route or means)
Regards

Hi,
Use t.code SE16.
Enter table name T158 and press F5.
This will allow you to add new transactions to the table.
Nir

Printing Indicator Icons in Primavera 6.2 Client Reports

Similar Messages

Maybe you are looking for