Printing Indicator (Individual/Collective Slip) at Display MIGO GR document

Hi, Good Morning...
FYI , I 've been check Collective slip indicator when prepare GR document. Once after press CHECK and POST button, system will generate document GR number. Then I just want to display the document again. When system prompt out, we discovered there is not in collective slip indicator status but it become individual slip. Any Other suggestions?

The system is default to pick the individual slip. Are you getting the print from MB90. If yes, then you dont need to worry on this one. On some systems I have seen all 3 options, mapped as collective slip for convenience of users, so that whatever they choose, it doesnot effect the print. Only main thing here is to get the Print active check enabled. If not the print will not go to MB90.
Usually I make the Print check button mandatory, so that material document is not saved without this check.
Edited by: Afshad Irani on Apr 28, 2010 7:33 AM

Similar Messages

WE03 Output type with print version '3' (Collective Slip)

I am using output type WE03 with combination of print version 3 (Collective Slip) to print GR slips.
My requirement is to print all the line items on single page (unless there is no room) .
However with this output type one line item is printed per page.
Does anyone manage to print items continously on the page without page break?
Is there any other output type/print version for that?
Well, the last option will be to change the print program and sapscript, but I am trying to avoid that...

Created new print program and replaced sapscript with smartform

Default print indicator tick in MIGO transaction

Hi all,
I need to set the print indicator for 'Collective slip' ticked by default for all the documents created in MIGO. I have done output determination settings for the same. How to do this? Because what happens is that, sometimes user doesnt ticks the check box and ultimately output doesn't gets saved. When i try to tick it from display mode in MIGO, again output doesnt gets saved. And i am doing it in MB02. Is there a way out to set the indicator(Check box) default for all documents created in MIGO?
Thanks in advance.
Regards,
Raj.

Goto SU3,enter your userid,in parameter tab give NDR and maintain parameter values as X.
regards,
indranil

BAPI_GOODSMVT_CREATE u2013 Collective slip not printed when called from Biztalk

Hi Experts,
Iu2019m trying to call BAPI_GOODSMVT_CREATE from within a Biztalk Orchestration.
Everything works fine except for one thing: The printing of the collective slip.
I made a quick test and the collective slip is printed when I call BAPI_GOODSMVT_CREATE from transaction SE37 (Test Sequences).
I have used exactly the same parameters for the two cases.
I can see that when I call the BAPI from SE37, an output is generated for the material document (MB03 / details / messages).
This is not the case when the call comes from Biztalk.
I followed the documentation and the notes 520813 (Question 12), 426554.
This means that:
- The user executing the BAPI has the parameter NDR set to u2018Xu2019 in his profile.
- VER_GR_GI_SLIP is set to u20183u2019 to ask for the collective slip print out.
- VER_GR_GI_SLIPX is set to u2018Xu2019 to enable the print out.
What should I do to be able to print a collective slip when calling the BAPI from Biztalk ?
Thank you in advance for your help,
Francisu2026

hi,
check out this thread.
Re: User Exit for MSC2n( Batch) while doing a Good receipt for an order
Ashutosh

Problem with printout for Mvtype 551 and Collective slip

Hi there!
Need some help.
Well, I have several items and when posting them with 551 in MIGO and check printing active on collective slip (3), the printout does not show any of items.
When posting it with same MvType 551 and check printing active on other two values (1 or 2), I get 1 printout for every item.
So, what should I do to have one printout for all items for MvType 551?
Thanks!

Hi Ines,
Go to NACE, select ME (Inventory Mgmt), click on procedures, select Inventory Mgmt, click on control.
Here you should find an entry for your condition type there should an entry with requirement type having a value, for GR it is 173, so for your case, check which one applies.
If helpful award points
Regards,
Vivek

Printing of GR/GI Slips and Batch Labels

Hello All,
Currently, at my client's place system is configured such a way that after completing the MIGO process, it prints 2 copies of the GR/GI slips whenever the goods movement takes place. Now along with the GR/GI slips they want to have the system prints the Batch labels for the quantities of units received.
They want to print the batch labels by using the MARA-WESCH field on the Plant Data/Storage view of the material master. But after checking that field I found nothing (not a single value) in it. But still the system prints 2 GR/GI slips after doing MIGO.
I am not able to figure out how to configure the system so that it should print number of Batch Labels by using the value in this field without affecting the current flow of GR/GI Slips. If anyone know about this then please respond.
Thanks.

Hi
We set up a separate condition record (Z001) which prints labels in addition to out 2 GR slips
We purchased some software from Zebra (who supplied our label printers) that is specific to SAP. We created the labels using the Zebra software and then imported the layout.
Therefore with a separate condition we could maintain separate parameters for the number required to be printed.
DArren

MIGO,MB1B, print indicator should be default

Hello
MIGO and MB1B transcations, print indicator is not selecting automatically. why?
background:
In user profile (SU01D), paramater NDR was maintianed correctly.
eventhough user is having NDR parameter, but he is not able to see the print indicator automatically??
in additioon , if they give manually print indicator for individual slip /collective silp, out is saved. and output is displayed in green color in GR iteam leavel "Message" tab.It means output setting are correctly maintained.
even i tested with my user id..if i dlete the NDR to my id, it is not working.
again i added NDR parameter, now it is correctly.
Question: In production already user was maintained with NDR parameter, but he is not able to see the print automatically.
so shall i delete his NDR parameter once and add again?? this will be work or not ?? please confirm.
Regards,
Pabbati Obulesu

Hi,
NDR parameter value should be upper case X.
Pls check your user parameter.
Regards,
Renuga.A

Goods Receipt Collective Slip for Mat Doc is not printing

HI All,
I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
I check the condition records in MN21, condition record is in place.
I check in OMB5, for movement type and material document configuratio its there.
I check in NACR, condition record is there.
I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
any help on this matter is highly appreciated.
I check in SDN, Googled it, but no result.
Thanks in Advance.

check this
2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
This program copies the basic settings from the SAP standard client (000).
from there:
http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
and check you have define some printer for the output.

POSTING_ILLEGAL_STATEMENT in MIGO for collective slip

Hi all.
I am using smartforms for printing GI slips in MIGO. The problem is that when i want to print the document for collective slip i get a short dump with error: POSTING_ILLEGAL_STATEMENT. I have looked over the internet for a solution but i could not find one.
Any ideas ?
Regards,
Cristian.

Hi,
For correct and quick response, Try posting your question in this forum -
SAP Community Network Forums » SAP Solutions » ERP SD Sales
Thanks,
Shambhu.

Printing problem with GR collective slip

Moderator message: Please do not post the same question in more than one forum. Duplicate rejected.
Hi all,
When I print GR collecive slip , it is not printing with standard forms iteslf. I m using standard form and print program. It is priting Individual slip properly. I want to print more than one line item in single page itself. Is there any configuration is there for WE03 ? or Need to code in form ? please help me on this
Using WE03 , Collective slip, checked ITEM OK
Thanks
JK
Edited by: Matt on Jan 23, 2009 9:34 AM
Edited by: Matt on Jan 23, 2009 9:34 AM

you need to write logic for multiple items, copy the print program and cnage the logic...

Print of all the document no In MB90 by collective slip

Hi All,
we want to print of all the document no. we put in MB90 from and to.
collective slip already mark in MIGO output.please guide what has to be done in configuration.
Or there is another Tcode where we solve this issue.
Thanks in advance.
Kunwar

Hi Kunwar,
first check, Have you created message for all the documents and what is the dispatch time in the message. You have to select option no. 3 ( send with application own transaction) for output type WE03.
SPRO >> Materials Management >> Inventory Management & Physical Inventory >> Output Determination >> Maintain Output types >> Click on Output type go to default values and set the dispatch time as 3
Hope this will help you.
Regards,
Manish Jain

N0 Collective slip is printing in MB90

Hi Experts,
I maintained configuration settings and condition records for both out put types WE01 and WE03.
When I do the GR Collective slip in the general tab is automatically activated and I can see the both out put types WE01 and WE03 in the out put tab.
but in MB90 system is showing only WE01 condition type and not showing the WE03 condition type .Here I need to print the collective slip for that GR document.
Any Inputs are greatly appreciated....
Regards,
Devi...

Hi
Please check in NACE and ME ( Inventory) there will be conditions WE01/WE02/WE03 ETC attached to the procedure just like pricing procedure check it there, if existing there should be no reson why it should not show up in MB90. Just check for condition records with WE01 & WE03 and the printer assignments , and print details. When taking print out in MB90, do not enter any output type but enter other details except for Material doc no... lok whether system is picking the output types pertaining to WE03 or not.
Regards
Samuel

MIGO - NDR print indicator default to unchecked

We would like to default the 'print' box in MIGO to always be unchecked when a user goes into the transaction. There will be times when the user will check the box to print a label; however this will not be often. Today, if a user checks the box, backs out of MIGO, then goes back into MIGO the box remains checked. It's like it remembers whatever was set in that box previously.
We've tried playing with the user parameter of NDR being set to 'X' (capital), or being set to blank, but it's like the parameter is not being read at all. The screen is only remembering what we did last when we re-execute the transaction. We've also tried playing with the GET/SET parameters in SE51, program SAPLMIGO screen 0110 - but again no luck.
Am I missing something being set somewhere for the NDR parameter to be read? Any tricks to get this to always default to unchecked?
Thank you for the suggestions.

I worked with ABAP'ers and it looks like this change was already in the enhancement section:
Program: LMIGOKH1
ENHANCEMENT-POINT HEADER_DEFAULTS_SET_02 SPOTS ES_SAPLMIGO.
Set print indicator
GET PARAMETER ID 'NDR' FIELD ps_gohead-xnapr.
We also have this:
Program: LMIGOHG2
    CHECK lcl_migo_globals=>kernel->s_action-create = abap_true."       307284
     REPLACE
    SET PARAMETER ID 'NDR' FIELD gohead-xnapr.
The even more strange (frustrating) thing is that if we set a break point at the SET indicator in program LMIGOHG2, then the logic is picked up based on the user Parameter - not based on the last value that was entered. However, if a breakpoint is set at the "get" section - it does not work.
I may be sending this one to SAP. Thank you for your suggestions.

Individual Collective indicator

Hi
Is there any report abt Individual collective indicator
I need a report regarding the requirements created on each date for the collective requirement of the material
I have maintained collective indicator for the material
Regards
Anand Srinivasan

Dear Anand,
There's no standard report regarding the individual/Collective Requirements.
But still if you want the list of materials with 1 - Individual Requirements only or 2 - Collective Requirements
only,you can get it from the table MARC in T code SE16.
Regarding your second part of question i'm sure whether you are l;ooking for this,
If you want the total Requirements for those materials,then go to T code MD73 - give the Requirements
Plan as * and enter the plant and the date range and proceed.
Regards
Mangalraj.S

Printing of individual slip

All,
I have done setting in WA01 for automatic print. (individual slip)
Now if I am transferring one material from one SLocation to another , print is coming for 2 SLocations .
Means in document 2 line items are created , one 'minus' stock in one SLocation and another 'plus' stock in another SLocation .
And print is giving for these two line items . How I can restrict print for only one line item.?
kindly advise.
regards

And what is wrong with that? Seems to be working as it should.

Printing Indicator (Individual/Collective Slip) at Display MIGO GR document

Similar Messages

Maybe you are looking for