Printing Individual Production Order Labels

Good afternoon,
I was wondering if anyone could point me in the direction of how I can printer individual production order labels. For example, I have a production order that I am able to scan, to generate barcode labels for all of the parts in the order. However, I cannot figure out how to print one part individually with all of the label aspects that are present when printing out the entire production order of labels.
I know how to print Free Material labels (ZSER) and Material labels, but they lack the production order number at the bottom of the label that is printed out when the full list of production order labels are printed. It is a waste of labels to print an entire production order list of labels, when just one label is misplaced or lost.
Is what I am asking possible?
Thank you in advance,
Rose

Dear Rose,
In Document Maintenance on Document Oprtions tab you can choose Shop Header checkbox to print an order header. Isn't it what you are looking for if you use ME application?
You may Printing guide available here useful:
http://wiki.scn.sap.com/wiki/x/dQCIFQ
Br, Alex.

Similar Messages

  • Printing of Production Order

    can anybody please explain how to set print parametrs for production order. from start to end.
    its urgent

    HI,
    You can set Printing Parameters for production Order in TCODE:  OPK8 & take print of production order in Tcode : CO04 ( Printing Shop Floor Papers).
    For more details of Printing Shop Floor Papers pls. go through following link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63198843a211d189410000e829fbbd/frameset.htm
    Regards,
    Tejas
    Edited by: Tejas  Pujara on May 26, 2008 11:43 AM

  • Print a Production Order

    Hi,
    In another System I can't print the Production order.
    I recieve this error.
    Element ROU_TEXT_SHORT window MAIN is not defined for form PSFC_PRINT_LAY
    Element BARCODE_AUFTRNR_MATNR window MAIN is not defined for form PSFC_PRINT_LAY
    I am not a programmer but I would like to know if the problem can only be resolved from a programmer or if I have any possibilities to customize the system so that it works.
    Thanks
    Dede

    Hi,
    Consult your ABAP consultant, he will help you. Since this is a functional forum, we will not be having the idea on technical.
    Regards,
    V. Suresh

  • Error in printing the production order in TCode COHV

    When i tried to print the production order in COHV transaction code the system prompts me an information message as order is printed but it is not generating any spool request even i am not getting the print too.
    This error persist for few orders only.For the  other Prod order these transation works fine.
    Can anyone help in this issue.

    Hi,
    COHV is for MASS PROCESSING please try with CO04N for PRINT.
    regards
    R.Brahmankar

  • Printing of Production Order related smartforms while creation of P.O

    Hi All,
    SCENARIO:  Production order related smartforms have to print as soon as we create the P.O. It is happening when I create the P.O in CO01 in front end.
    PROBLEM: I am calling CO01 transaction in BDC method and creating the P.O, I have used MODE 'E' UPDATE 'A' in call transaction method. Here it is not triggering the smartforms. First of all, it is not triggering my print program itself. But it is happening while in creation of P.O in front end.
    Can anyone tell and suggest me, how can we solve this problem.
    Thanks and Regards
    Ramesh mavilla.

    Hi Ramesh,
    Few screen would popup only in foreground but not in background. That could be the reason bcz of which you BDC is not working in background.
    Please pass the BDCMSGCOLL data into a spool using WRITE statement to check what is the error in executing BDC.
    Else debug the background job using JDBC in command prompt of SM37.
    Best regards,
    Prashant

  • Assigned document to operation in routing isn't printed in production order

    Hi experts,
    I have assigned the document to the BOM and also to the operation in the routing.However this document is not printed when the production order is printed.This document can be seen at the routing,CA02, on the screen with all components, but it is not shown in the production order transaction  CO02, at the routing.Is there something in customizing that has to be activated?
    Thanks a lot .
    Best regards,
    Danijela Zivanovic

    Hi experts,
    I have assigned the document to the BOM and also to the operation in the routing.However this document is not printed when the production order is printed.This document can be seen at the routing,CA02, on the screen with all components, but it is not shown in the production order transaction  CO02, at the routing.Is there something in customizing that has to be activated?
    Thanks a lot .
    Best regards,
    Danijela Zivanovic

  • Change output printer when printing a production order

    I can see that there is a specific printer associated with the output of a production order.  Is there a way to change the destination (a different printer) when printing a single production order?
    Right now I can see where the printer destination is shown in CO02, but I do not know how to change it. The screen is display only. The menu path is Order->Settings->Print info.
    Any help would be appreciated.

    Hi Janet,
    Try this.
    Path: CO02 -> Enter PO-> Settings -> List Control -> Here you can change the printer -> Click on continue button.
    Regards,
    Ferry Lianto

  • Add diagram to print with production order

    Hello Gurus,
    We had a request come from one of our production areas to add a diagram of the case pack configuration that differs with every customer. I'm wondering what the quickest/easiest way to implement this would be. Right now, I'm the only one tasked with this assignment but will most likely have to pull more people in.
    Thanks,
    Nick

    HI Nicholas,
    This is interesting.
    All I can think as of now is, create Sales BoMs and attach documents to the BOM header, and see if you can pull these Documents into Production order.
    even I want to listen other ideas.
    Regards,
    Sandeep

  • Error message printing a production order

    Hi all,
    We are using MTO and have configured the scheduling profile so that the order is printed as soon as it is released. However I've noticed that the order is not being printed and once it is released we ahe the following message:
    "CO: Program PPCOXPR1 Create missing parts index from table RESB  Program run not necessary Program already run ".
    The same message appears when I try to print the order with CO02 or with CO04.
    Please help!
    Thanks

    Hi,
         Can you Check the Settings in OPK8 t-code and Remove the program PPCOXPR1 from print program if it is set
    Thanks,
    Rajanikanth

  • Print of Component List from Production Order

    Hi Everyone,
    How do we print the list of components which will be used in Production Orders? The scenario is that we have the components in WM bins. As soon as the production Orders are confirmed, we need to print a list of all the components which are required for Production. How do we print that?  WM is planning to develop a system where the print out has a bar code and the RF Gun will read the quantities of the components required for production. Can you please let me know where I can see the print preview of the components involved in manufacturing?
    Thanks and Regards
    Lisa

    Hi Lisa,
        The production order can be printed in CO02 screen itself.(Ctrl+P). To define what to be printed, you need to identify/define the correct list in the transaction OPK8. Once the correct combination is selected for the required plant and order type, this can be printed in production order.
    But for the preview after printing, you can view the spools created in SP01.
    Hope this helps.
    Thanks
    Muthu

  • Preview and print a printout in production order release

    Iu2019m using CO02 to release and save the production order. Currently u201Cbatch cardu201D printout is automatically printed in production order release. I want to change this to preview the printout before printout is send to the printer. Can someone tell me the configuration for this.

    Hi
    Pls refer this link
    layout adjustement in production order- suitable to printout sheet
    Print Preview of Production Order
    layout adjustement in production order- suitable to printout sheet
    Thanks
    S.Murali

  • Production order Printing issue

    Hello,
    when we are trying to print the production order and pick list through co01 or co04 ,it is printing two times, where we can control the settings, we want only one printing , Thanks for the help
    Nick

    Hi Nick,
    Check in the OPK8 in the 'List control for transactions' in that whether you have given in column number of printout - 2. There are two fields "Number of printouts"  check both and Remove it put it one.
    regards
    ramakant
    Edited by: ramakant shekapure on May 18, 2010 12:25 PM
    Edited by: ramakant shekapure on May 18, 2010 12:54 PM

  • Printing long text from Routing instead of Production order for an order.

    Hi Gurus,
    When a production order prints it is printing  the long text from the routing master rather than the long text on the actual production order.
    This field is used to provide specific instructions in special circumstances in addition to the standard text.
    I need system to be changed so that printing takes long text from production order.
    Please help me.
    Naveen.A

    Hi,
    In the production order long text, the text we are maintaining is only for information. It can't be able to print. In Production order, copies all the masters and the texts which we are maintaining in the masters only will be able to print. Standard SAP will not print the production order long text.
    Regards,
    V. Suresh

  • Error in Production Order print

    Hi PP experts
    I am trying to print a production order using co02. It gives the following error.
    [Element_ROU_TEXT_SHORT window MAIN is not defined for form PSFC_PRINT_LAY]and
    I am using PSFCCOBJL program
    and using PSFC_PRINT_LAY form
    please suggest what can be done
    Thanks

    Dear Rajesh,
    Smartform PSFC_PRINT_LAY has error. It appears that Element ROUTEXT_SHORT has not been defined but is used.
    You can check this:
    Go to transaction SMARTFORMS -> enter SMARTFORM Name -> Choose execute -> It will take you to funciton builder with a function name (Smartforms generate a Function Module when activated) -> Execute -> Provide values -> Execute -> It will display the error.
    Regards,
    Naveen.

  • Problem printing production order.

    Hi  guys
    this is my first post. i have a problem  printing production orders.when i give a print. its printing only 2 or  3 line.what should i do to add  some more information to my production order.and where can i view the print preview of my production order.

    Hi,
    The production order can be printed in CO02 screen itself.(Ctrl+P). To define what to be printed, you need to identify/define the correct list in the transaction OPK8. Once the correct combination is selected for the required plant and order type, this can be printed in production order.
    But for the preview after printing, you can view the spools created in SP01.
    Or T code CO04N or CO04 is meant for printing production orders
    Need to do the setting in OPK8
    First check the configutaion link below and then come back.
    http://help.sap.com/saphelp_40b/helpdata/en/3a/72369adc56d11195100060b03c6b76/frameset.htm
    Regards,
    R.Brahmankar

Maybe you are looking for