Printing Inserts in windows

I know that many people have experienced problems printing Cd inserts in Windows. In my case I can print but I cannot get them to print in landscape. If I try and change the printer properties from within Itunes it just hangs and I have to "end the proceess" in task manager (Windows XP)>
Does anybody have any words of advice?

Have you tried updating your printer software?

Similar Messages

HT203164 Cannot print CD Jewel Case Insert using Windows 7; iTunes print options work fine from Windows XP; using iTunes print option CD Jewel Case Insert with Windows 7 prints jumbled mess?

Cannot print CD Jewel Case Insert using Windows 7. iTunes print options work fine with Windows XP, but attempting to print CD Jewel Case Insert from Windows 7 yields jumbled mess.

I'm having the same issue - when I try to change any print options iTunes freezes and I have to end the process in Task Manager... I was trying to turn off duplex printing and the printer option screen wouldn't take any input. I changed the default printer properties to turn off duplex; iTunes did not reflect the updated preferences. It looks like there is an unknown issue with the printer setup module - guess that doesn't get much use anymore or Q/A should have picked up the issue...

Printing to a Windows Print Server

I consider myself pretty computer literate however I am comletely baffled at how to connect to a print server running Windows 2000 using my MacBook at work.
I have tried going into:
System Prefs > Print & Fax > add printer > more printers
which brings me to two pull down menus that have options the options:
"Apple Talk, Blue Tooth and Windows" printing as well as "Canon IJ Network, Epson Apple Talk & Wirewire, Espon TCP/IP etc" The second drop down says "Network Neighborhood" or "Workgroup".
I am pretty sure I have tried every combo of these and nothing recognized the two printers on the server (Samsung ML-2150 and HP Business Inkjet 1200).
I made sure I have the most recent version of both drivers for Tiger 10.4.7 and I can connect (and print) to each printer directly using USB but not through the network.
I am using Airport to do so but I have used Ethernet cable as well to test and no luck. I am also hooked up through a Linksys WRV router and tried using a second router hooked up only to myself and the printer.
Despite all of the above, please feel free to dumb down the suggestions as networking is not my strong suit.
Any suggestions would be greatly appreciated. I can update anyone with more info if there is something I have left out.
Thanks

Hi,
I have come across several of your posts in trying to resolve a problem connecting to a printer on a G5 from Windows 2000. This post I could reply to.
First off, I think your documentation is great.
I have read http://www.ifelix.co.uk/tech/3000.html to try and connect from a Windows 2000 box to a Mac G5 running 10.3. I have followed it to a 'T', but I get the message that I can't connect to the printer -- either the name is wrong or the printer is disconnected. Checked each case, and keep hitting the wall.
I have been able to identify the Mac from the Windows box, and connect to a directory, but try as I might, the network printer will not show up in the network neighborhood. Typing in the name (queue_name) has not worked either.
I checked the /etc/smb.conf and printcap files. Should I be manuall inserting the name of the printer into the smb.conf file?
Stumped.
Any ideas? Very frustrating bit this is.
Thanks,
dbrktkt
g5 Mac OS X (10.3.9)

Please I can't solve this!!! - I have an image that i need to blend into white for printing on a window foil. Where can I upload it to show what i mean?

How can I bland out the dark blues and get the effect that are on bye right image. In the illustration I have bladed it in lighten, but I need to make the same result where the transparency part is white - because the prater that prints on the window foil doesnt print white.

I had some difficulty understanding what you had written but I think this is what you had in mind.
To get this result:
1. Go to Channels and choose the Green channel. Drag it down to the Create New Channel symbol to create Green Copy.
2. Use curves to increase the density of the low end of the tonal scale. The result will look like this, except that it will include white circles.
3. To turn the white circles black, choose the Magic Wand with the Contiguous box in the Options bar unchecked and click on one of the circles. All of them will be selected,
4. Choose Select > Modify > Expand and expand the selections by 2 pixels. Then go to Edit > Fill and fill with black. It now looks like the illustration above.
5 . Go to Layers and trash the lock on the Background. Add a layer below it and fill it with white.
6. Return to the Channels panel, choose Green Copy and Select > All
7. Return to the Layers panel, choose the image layer and click on Add Layer mask.
8. Option click on the mask in the Layers panel. The image area will go white. Edit > Paste and the Green Copy Mask will be inserted in the mask.
9. Click on the eye in the Layers panel to see the completed work. Seen below
10. Last, increase the highlight contrast in the mask to increase the density of the green image.
The final layers panel will llok like this:

Printing from Windows 8 to a shared printer on a Windows 7 machine

WE have a a user that has a laser printer on A windows 7 machine that others in the office can access EXCEPT the one person on a Windows 8 machine. We have tried everything, but cannot get her to print to this printer. Says it cannot be found. What does
Windows 8 need to see a printer on a Win 7 workstation. She does have access to network printers and her own.
Thanks.

We have the same kind of problem but a bit different.
Dell Printer (used for years shared on a network) was moved to our Windows 7 machine plugged in via USB. We only use a plain workgroup with no Domain as we also have Macs on the network.
I have Macs using shared printer, a Windows XP using the shared printer, and even Windows 7 under Parallels on the Macs using the shared printer no problem.
I had the lone Windows 8 laptop using the shared printer but then it just stopped working. So I deleted it and now when I try to add it is want credentials and none work. It will not connect to the shared printer on the Windows 7 machine.
I have Windows 7 (which also has a couple shared drives that do work) set for No Homegroup and No Password for sharing - pretty much open as we are behind a Cisco Firewall to the outside. No firewalls on the pcs.
Not sure where to go from here...

V3 Printer driver on Windows Server 2012

Hello there.....
I have installed Print services on Windows Server 2012. I have read several forum and found that it is a best practice to install V3 drivers if workstations run on Windows 7.
Our all of workstations have windows 7 so I want to install v3 printer drivers. we have printers of HP and Canon mostly.
So can anyone tell me how can I get V3 drivers of HP Laserjet P4015 for example...
I have installed a driver but found its v4.
Please tell me how can I install V3 driver for HP, Canon printers.....
Thanks
Kind Regards
Namvi

You would need to use the V3 drivers that the vendors provide to Windows Update
http://catalog.update.microsoft.com/v7/site/Home.aspx
or from the vendors website
Alan Morris Windows Printing Team

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problems Printing to Shared Windows Printer Via SAMBA (foomatic error 255)

I can NOT print from my MacBookPro to a printer that's shared out from my Windows PC. Of course, printing to this same printer from my PC works fine.
Please help me resolve this printing problem.
Read on for more details regarding my printing woes!
I can successfully setup my printer on the MAC side using the Printer Setup utility. I see the shared out printer on my MAC; I can pick the printer's manufacturer and model. Everything looks ok regarding the setup of the printer on the MAC side.
However, when I try to print a file from the MAC, the printer never prints. The print job appears to get queued on the MAC side. However, after a few seconds, the printer queue displays "foomatic-rip stopped unexpectedly with error 255" (if I selected a foomatic printer driver from the hpijs). Otherwise, it says "NTSTATUS_NOMEMORY" error (if I selected a gutenprint driver instead).
The PC's Windows event logs show no problems. Indeed, the Security event log shows successful authentication & access to the printer.
The MAC's CUPS error_log displays the these error messages:
GutenPrint fails with NTSTATUS_NOMEMORY error, then says Cannot connect to SAMBA host
hpjisGhostscriptFoomatic fails with "The process 'foomatic-rip' stopped unexpectedly with status 255"
Later, I will post the exact entries from this log (I am currently separated from my MAC laptop until later this evening).
My Apple MacBookPro is running MAC OS X 10.4.11 ("Tiger"). The printer is an HP DeskJet 5150 connected via a USB port to my DELL 8400 PC. This desktop PC is running Microsoft's "Windows XP Pro Service Pack 2").
Based on reading other posts (here) and at the Linux Open Foundation (printing), I have already done the following:
Installed gutenprint;
Installed foomatic (foomatic-rip v3.42.2.15);
Installed ghostscript (espgs v7.07.1); &
Installed hpijs (hpijs v2.7.10).
NOTE: This is NOT the same problem that I posted earlier regarding inability to print to a shared printer with Leopard (MAC OS X 10.5.0). Today's posting deals with my inability to print to the shared printer from Tiger (MAC OS X 10.4.11).
NOTE: This may be a "red herring" but you may need this additional background to help resolve my printing problem. Originally, I ran "Tiger" (MAC OS X 10.4.10) on my MacBookPro laptop. Of course, networked printing worked fine at this point. On October 28, 2007, I upgraded to "Leopard" (MAC OS X 10.5.0). Leopard was a "disaster" for me (printing, networking & many other problems). On November 9, 2007, I "punted" and re-installed "Tiger" (MAC OS X 10.4.10) from Apple's original CD. On November 15, 2007, I upgraded to MAC OS X 10.4.11 via Apple's software update utility. I vaguely recollect that networked printing was working after I returned back to Tiger.
/s/
Tony H.

As promised in my initial post regarding my printing problem, here are the actual error messages displayed in the Print Queue (Hp5150) and the "cups" error_log when I try to print any file to my HP 5150 that's directly connected to my DELL PC (Windows XP Pro) but shared out so that my MacBookPro should be able to print to it.
Printer Queue Hp5150 window displays:
=========================
The process "foomatic-rip" stopped unexpectedly with status 255.
/var/log/cups/error_log displays:
=====================
I [04/Jan/2008:20:25:17 -0500] Job 3 queued on 'hp5150' by 'anthonyhackenberg'.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 681) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 682) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 683) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started backend /usr/libexec/cups/backend/smb (PID 684) for job 3.
E [04/Jan/2008:20:25:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:25:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...Insecure $ENV{PATH} while running setuid at /usr/libexec/cups/filter/foomatic-rip line 215.
E [04/Jan/2008:20:25:17 -0500] PID 683 stopped with status 255!
I [04/Jan/2008:20:25:17 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [04/Jan/2008:20:26:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:27:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:28:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
Again, the system Event logs on the Windows XP side show no error messages. In particular, the Security Event Log shows that authentication was successful; so, the MacBookPro's client process was granted access to the printer on the DELL PC side of the transaction.
Message was edited by: ClassicalApproach

Photo Printing from Networked Windows 7

My HP Photosmart Printer is USB connected to a Windows XP machine which is directly attached to the home network. Also have a Windows 7 64 machine wirelessly connected to the home network. The Photosmart printer was added to the windows 7 machine and selected as the default printer and I have no problems printing to it from the Windows 7 machine except that I only recently found out that I cannot select from various photo paper sizes to print photos from the Windows 7 computer. All various printing programes only give me a limited selection of paper sizes to choose from when configuing the printing - Letter, A4, A5 Envelope, Legal, etc. The same programs on the XP machine offer the choice of various photo paper sizes to print to. It seems as though all of the Photosmart configuration options are not available via the Windows 7 computer. Should I try to install the printer on the Windows 7 machine again, directly from a downloaded HP installation file?

Hi,
Well, looks like you have to install drivers on the Windows 7 machine (if supported) but I how do we know your printer to find out ?.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Firefox crashes on Windows 7 when printing to a Windows 7 network printer.

On Windows 7 running Firefox 3.6.10, I cannot print to a Windows 7 network printer. Firefox crashes every time as soon as I hit print.
However, the situation is very specific. I can print from Windows XP using Firefox 3.6.10 to a Windows 7 network printer. I can also print from Windows 7 using Firefox 3.6.10 to a Windows XP network printer. The only situation that doesn't work is using Firefox and printing from Windows 7 machine to Windows 7 machine.
Firefox is also the only program that does not print. I can print using Internet Explorer, Google Chrome, MS Word, MS Excel, and every other application just fine. Firefox is exclusive in that it is the only program that crashes and refuses to print. The drivers that are being used a PostScript drivers.
I have tried multiple versions of Firefox from older ones to the Firefox 4 beta and the program crashes every time.
Again, the only time it crashes is printing from a Windows 7 client computer to a Windows 7 network printer. Printing from XP to Windows 7 and from Windows 7 to XP works.
Any help would be greatly appreciated. The only program I've noticed the problem with is Firefox, so I'm assuming it's a problem at the application level.

Here is the Crash Report for a user more experienced at reading Crash Reports than I am: <br />
http://crash-stats.mozilla.com/report/index/45f47e99-ea8e-449f-aa1e-6399e2101014
Here's a search for that particular Signature - [http://crash-stats.mozilla.com/report/list?product=Firefox&query_search=signature&query_type=exact&query=OPBinaryCookedPortWrite&date=10%2F14%2F2010%2014%3A00%3A00&range_value=1&range_unit=weeks&hang_type=any&process_type=any&plugin_field=&plugin_query_type=&plugin_query=&do_query=1&admin=&signature=OPBinaryCookedPortWrite OPBinaryCookedPortWrite] <br />
Looks like a Windows problem, but not restricted to Win7 or 3.6.10 - there's one on Vista SP2 with Firefox 3.6 and another with 4.0b6 on Win7.

Printing through a Windows computer.

I'm working on a 1GHz Power Mac G4 desktop that is connected with Ethernet to a Linksys BEFW11S4 wireless router. The printer is connected to a Dell Dimension 4300 by USB. The question for me is, even though I can get the printer to show up in my printer search list, I can't get anything to print off of it. Does anyone know a possible solution? Any ideas would be greatly appreciated. If you have any questions about details or anything, just leave me a message. Thanks for your help!

I have a Mac Mini running Leopard and I print through a Windows XP computer with printer sharing turned on. My printer is a Samsung ML-1710.
The printer shows up in the network as expected, but initially I had a problem in which the job was sent, the printer spun up then stopped dead.
I tracked the problem to the driver setting on the Mac, which had defaulted to Generic Postscript Printer. Since Leopard had no driver for the ML-1710, I got it from the Samsung website, installed it, and changed the print driver to the proper one. Then it worked fine.
I guess the important thing is that you are running the correct driver for the printer, as unlike WinXP, it doesn't install a network printer driver for you.

Printing to a Windows Shared Printer in Windows Domain Stopped Working

If anybody can shed some light on the problem below I would be highly appreciative. I have tried every suggestion I've found on ways to fix this problem, including postings found on this forum, without success.
I use able to Print to a Shared HP Laser Jet printer one a Windows 2003 Server machine, which is part of a Windows 2003 Domain. It has been working faultlessly until about a 2 weeks ago. I have had a number of errors including unable to Connect but the Error I get constantly now is:
+Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY"+
I have reset the password of the windows user that originally made the connection when the computer was set up and this password had special characters. After reading various posts I have tried:
1. Reseting that users password without special characters, deleting the printer and adding it back in using the same user and the new password. The same user can map and connect to windows Shared Directories on the same Server and open and edit files
2. I have reset the Keychain to make sure it was using the new password. Again deleted and re-added the printer.
3. Created a new user both on the domain and one the print server deleted and re-added the printer using each user while also reseting the key chain
4. Tried the Advance option on the Printer Setup Utility using the following SMB URL format,
smb://user:pass@Domain/Machine/Printer where, the domain is called "home", the machine name is "Devserver01" and the printer share name is "HPLaser" resulting in a smb URL of smb://shanep:xxxxx@Home/Devserver01/hplaser.
None of the above work!
So as a new MAC user I have absolutely no other ideas of where to look for additional information on what is happening i.e. where do you look for log files that may contain additional detail.
Can anybody assist on suggesting any other things to look for or check?
Thanks
Shane

Hi Greg,
Thanks of the tips. I have just managed to get it working and I didn't use the LPD method but tried a few different smb URI's.
Here's what I found worked.
1. I created a standard user account on the Windows 2003 server on which the printer is connected and shared, i.e. a non Domain user name that is local to the server only and not the domain
2. I then used this user name and password, along with the IP address of the server in the URL i.e.
smb://user:password@IPofserver/hplaser.
3. Printed a test page successfully
I then tried variations of a theme using username and passwords on the domain, changing the @workgroup/server/printer with no success.
I could however replace the IP address with simply the @Server/Printer combinations using he local user name and password successfully.
I also installed apple and Unix printing and file services so whether this made the difference I'm not sure.
Interestingly I tried to add the mac to the LDAP/Active Directory and couldn't successfully bind to the directory. Not that I'm an AD expert, but I have configured a few Java applications to use LDAP/AD authentications and groups of late so this problem is a little unusual, but that aside, thanks for the pointers, Printing problem solved. now to solve the AD one
Shane

Printing to a Windows shared printer via SAMBA

I'm trying to setup my mac to print to a printer shared via a Windows PC on my network. I have gone into system preferences / print&fax and added a printer, used the "Advanced" settings on the toolbar, chosen SAMBA and entered the address of the printer as smb://IPADDRESS/printername
When I try to print to this printer, it asks for a username and password. I enter it and then the document briefly appears in the printer queue and then disappears as if it has printed successfully. The document however never appears in my Windows printer queue or actually prints.
CUPS does not return any errors in the CUPS log file. CUPS actually says the printer is idle and accepting jobs.
A friend can print from a windows PC to the printer by using the address \\IPADDRESS\printer name in the manual windows printer setup (the printer does not show up in the browser).
I can also connect to the computer using Leopard's built in SAMBA networking by accessing smb://IPADDRESS so I know the server is active on the network and my username and password work.
Does anybody have any ideas why I am not getting an errors and it's still not working?

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

Printing to shared Windows printer fails after Yosemite upgrade

Running Mountain Lion had a working shared printer from Windows 7 Pro - a Canon MX310.
After upgrade the printer is still there but trying to use it results in "Support Code : 306 A communication error has occurred..."
Tried deleting the printer then re-adding. The OS X printer app finds the printer in the windows workgroup, appears to have a little chat then says its added ok. Same Error.
Tried a reset of the mac printing system - same.
Printer is working on the host PC and from other network windows PC.
Anyone else seen similar issue?

I can't claim any experience with this printer. I am going on what the "specs" say should work.
There are three software pieces needed to set up this printer. For the first two, you will need to download and install both the Foomatic-RIP software and the ESP Ghostscript software from <http://www.linuxprinting.org/macosx/foomatic/>.
For the third item, you will need to download the PPD for this printer from <http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-BJ-200>. Place the PPD in the following folder (make any folders that are not already on your system):
/Library/Printers/PPDs/Contents/Resources/en.lproj
This setup will use the bj200 device that is built into Ghostscript. The notes that I find in the device driver indicate that this is using the BJ-10 command set. The manual for the bj-200e shows that this is one of the languages it can use. There might be some DIP switches you need to set to make things compatible with this command set and/or the line spacing set forth in the device driver.
Let us know how this goes.
Matt
Mac Mini G4; B&W G3/300

Printing to a Windows printer over a home network

Help please ! I have a Canon Pixma iX4000 attached to a Windows 7 64-bit laptop. I want to print from my Apple iMac running Snow Leopard OSX 10.6. I have tried Samba, LPD and variants of printer definitions e.g. smb://servername/printer name,. Also tried URL of the server instead of the server name all to no avail. I can access the server hard disk but not the printer. Is the problem the 64-bit O/S o nthe Windows machine and if so any thoughts on how to get round this prolem? I use Prefernces to add a printer so presumably need to add the 64-bit Mac driver at this time. Where should I install it?

As Greg has mentioned, the Canon driver on the Mac cannot be used to print via a Windows share. Normally Gutenprint would be the best option as it is free. However the iX4000 is not listed as a supported model and you could spend a long time finding another model of Canon - Gutenprint driver that does work correctly with the iX4000. So your best option is to use [PrintFab|http://www.printfab.net>, which does list the iX4000 as a supported model. Note that PrintFab does cost €49 but there is a 30 day trial so at least you can make sure you are happy with it first.
Also, the Windows 7 PC being 64bit has nothing to do with the problem. If you were using a 32bit PC then you would have to install the 32bit driver to the Windows 7 PC. This is known as a Point & Print connection which uses the RPC protocol. The Mac connects to Windows via SMB and thus the Windows queue is simply a path to the printer. Windows doesn't interact with the spool file.

Printing Inserts in windows

Similar Messages

Maybe you are looking for