Printing inspection results
Hello friends;
After results recording for inspection lot, we can print all those results directly from QA32 or QGA3. I dont want all recorded results in print out. I want only certain results in print out. How can i do it, so that only required results get printed. Is there any settings for that ?
Waiting for reply!
Thanks!
HI
Kiran
For this u goto QAG3 and select inspection lot number or batch and go to dynamic selection symbol in menu in that select material specification and in that selection criteria select operation number and master inspection charac and put operation number and mic as per ur printing requirment.
thanks
avinash
Similar Messages
-
Hi experts,
I am getting error "Text element does not exist" while printing the Inspection Result Print out. The form being used is the standard SAP form QM_INSP_RESULT.
Have any one encountered any such issues ? My version is ECC 6.0 with Logistics and Accounting release 603.
Thanks in advance,
JMGHi All,
There is some problem with the standard SAP delivery of this form for ECC 6.0
SAP is working on it
Regards -
How to print insp. lot / result
guruHi Gur,
There are a number of ways to print the Inspection Results:
1. From Transaction QA33 find inspection lots you are interested in, select the line and hit the 'Inspection Report' Icon and choose your print options.
2. From Transaction QE03, select your inspection lot, hit icon 'Result Printout' and choose your options.
3. Use transaction QGA3, select your inspection lot, make your uotput options and hit 'Execute'
There are many more! You are probably not going to like the standard output so I hope you are familiar with SAPScript! -
Copy Inspection Results of one lot to other lots at a time
Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out -
I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?
Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT -
Experts,
How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
Thanks!
RgdsSure you can. Simply add some of the standard characteristics to the batch class that SAP provides.
LOBM_APO_SL_MAX Max shelf life/maturity in sec
LOBM_APO_SL_MIN Min shelf life/maturity in sec
LOBM_APO_SL_UTC Reference time stamp of batch
LOBM_BPRIO Stock determination: priority
LOBM_BWTAR Valuation type
LOBM_HERKL Country of Origin
LOBM_HSDAT Date when batch was produced
LOBM_KRT waiting period of a batch
LOBM_LFDAT Batch determin. delivery date
LOBM_LGORT Storage location
LOBM_LVORM Deletion ind. for batches
LOBM_MBDAT Material availability date
LOBM_MENGE Batch determination sort qty
LOBM_QNDAT Next insp. date for batch
LOBM_QSCORE Qualityscore Usage Decision
LOBM_RLZ Remaining shelf life for batch
LOBM_RLZ_PROZ Req. remaining rntme in proc.
LOBM_UDCODE Usage Decision
LOBM_VERAB Availability date
LOBM_VFDAT Expiration date, shelf life
LOBM_ZUSTD Status of batch
Not all of these are suitable to add to the batch class. Some are designed strictly for batch search strategy classes. There are several OSS notes out there on the use of these. As you can see, several of these are date related. I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
As you can see, the Batch number is not in the list of standard characteristics. This can be created however. Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes. You can then use it to search and sort for specific batches just like any other characeristic in CL30n. When displayed, the field is greyed out from user entry since it is a referenced field.
Craig -
Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
NavinHi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun -
Inspection results for more than one lot
How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
PrahladDear Prahlad
You can see it in ways
1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
4) standard reports such MCXD,QGP1 can be used
Hope this helps
Regards
gajesh -
Hi Experts,
After inspection results being inputted, is there any standard TCODE in SAP which can list out the inspection results in detail (1 by 1)?
And also any program for listing what results required to be inputted but not yet inputted?
Thanks a lot!
Regards,
DanielHave you tried
MCXV
1
apart from QA32/QA33
Edited by: nbgore on Mar 31, 2011 2:14 PM -
Inspection result to multiple batches
Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev -
Copying Inspection results from inspection lot.
Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar MokashiHi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM -
Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM -
SAP QM Result recording - Copy inspection results functionality
Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
ManoharHello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle -
QM: Copying inspection results to another lot
Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
RgdsHaving seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig -
QM Inspection results transfered back to batch
Experts,
after taking a usage decision, I want all inspection results to be transfered back to the batch.
But if a result is out of spec, it gets a negative valuation, then I get the warning 'batch could only be partially valuated' and the result of this char is not writte back to the batch.
How can I have also the negative results recorded in the batch?
ThxIn the batch level make sure that any value you are giving will be accepted.
master data required
Batch and batcth charectristics
MIC- copay from batch charectristics
Material specification with same MIC's.
Quality plan with same MIC's.
In the batch charectistics make sure that the range is more tahn that in MIC so that any value is taken or in batch chereristics -check box - aditional value allowed in value tab page is active.
With this setting you should be in the position to get the results
Maybe you are looking for
-
Macbook Air (13") screen question
Does the mid 2013 Macbook Air have any sort of coating on the screen?
-
Cannot download movie purchase on Ipod touch
Im somewhat challenged when it comes to this. IM 47. LOL I purchase a movie on Itunes. It was downloaded on my ipod touch, from one computer in my home with windows vista on it. I bought a new laptop and tried to sync my ipod to it. I noticed after t
-
Aperture won't load with Leopard
hi, i have been through several article in both Aperture and Leopard forum... and i haven't find any answer yet to why Aperture doesn't load since i have installed Leopard. i have perform twice a Leopard "erase & installed" followed by Aperture insta
-
i connected my apple tv to my denon amplifier (AVR 4308), which is connected to my first tv set in the living room. I can successfully play video and music from my itunes library and video/music are streamed to my home theater/sound systems through m
-
I know in the table-based world of Lua this is probably klutzy, but hear me out. In one part of my code I am creating an Array of Arrays containing information about some LrPhotos as well (for good measure) as the actual LrPhotos, and I'm putting it