Printing internal table data

Hi all,
I want to print an internal table data without displaying it via ALV. That is when clicked on a button, printing should be started.
How can I do that?
Thanks a lot.
Deniz.

Hi,
   Check the following code this is exactly what you need I guess....
FM to generate spool number for the internal table wt_final_prnt.
CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
        EXPORTING
          name        = gv_name
          dest        = gv_dest
          rows        = gv_rows
          startrow    = gv_startrow
          pages       = gv_pages
          rqtitle     = 'Z9CS - STD Search Results'
          rqcopies    = gv_rqcopies
          rqowner     = gv_rqowner
          immediately = gv_immediate
        IMPORTING
          rqid        = gv_rqid
        TABLES
          text_data   = wt_final_prnt
        EXCEPTIONS
          OTHERS      = 1.
      CLEAR : wa_final_prnt, wt_final_prnt[].
FM to set the print attributes.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        IMPORTING
          out_parameters         = wv_pripar
          out_archive_parameters = wv_arcpar
          valid                  = wv_val
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
FM to submit to the printer
      CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
        EXPORTING
          spool_request_id = gv_rqid.
Regards,
Ram.

Similar Messages

Problem in printing internal table data in Sapscript!

Hi All,
Am trying to print internal table data into main window of sapscript.
This is what I have written.
loop at it_final INTO wa_final.
              CALL FUNCTION 'WRITE_FORM'
               EXPORTING
                 window   = 'MAIN'
                 ELEMENT = '670'
                 TYPE     = 'BODY'
                 FUNCTION = 'APPEND'
               EXCEPTIONS
                 window = 1
                 element = 2.
             IF sy-subrc <> 0.
             ENDIF.
ENDLOOP.
IN Sapscript :
/E   670
IT     &wa_final-vbeln&,,&wa_final-vbelv&,,&wa_final-payment&
=      &wa_final-rundate&,,&wa_final-waers&,,&wa_final-creditcard&
=      &wa_final-augru&,,&wa_final-dmbtr&
Pls let me know if am missing anything.
Thanks & Regards
Himayat

Check if your Programm is called at the Sapscript level.
Are you calling the programm from the Sapscript using the PERFORM command? or are these Programm and Sapscript set in customizing?
Using SE16 check the Message Type and see if Sapscript and the programm are connected at all.

How to pass the internal table data to smartforms

Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = T_SSFCTRLOP
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
    OUTPUT_OPTIONS             = T_SSFCOMPOP
    USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    LT_PRDLBL                 = LT_PRDLBL1
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
        include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PM

Nehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
&LT_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks,

Adobe form - Split internal table data & dis on the right and left corner

HI ,
I have a form where i am populating the data via an Internal Table.
The concern i have is i have 100 rows in the table and i want to print the first 10 rows on the right hand side of the page and the next 10 rows on the Left hand side of the page. I want to do this dynamically on multiple pages during run time based on the volume of data in the internal table.
I am sure i cannot dynamically change the interface of the form to allow multiple internal table , Please suggest if there is any other solution.
Thanks in advance
Tk
Edited by: tarunk on Jan 16, 2012 5:56 PM

Hi,
Thank you very much for the input, But my concern is
I have a table with 120 records.
i have three columns which i have it on the right side as well as on the Left side of the page.
EX:
Right Side Left Side
Col1 col2 col3 col1 col2 col3.
Now what i want to do is the first ten rows of the internal table data i want to print it on the Right Side and the Next 10 rows on the Left Side in the same page .
I want to do this on Multiple pages.
please suggest.
Thanks,
Tk

How to save internal table data to file on local disk from smartforms?

Hi there,
I'm trying to save internal table data into .csv file on presentation server from within smartforms using GUI_DOWNLOAD function.
This function works fine from abap program, but when I call it from smartforms it does nothing. Form prints ok and there is no file created on local dick.
Is there a way to save smartforms internal table data to local disk?
Thanks in advance,
Baske

Hi Jey,
Thanks for your prompt replay.
Unfortunately, Iu2019ve tried both your suggestions without success. Smartforms behaves just like in case of GUI_DOWNLOAD. There is no file saved on disk.
Do you have any other idea?
BR,
Baske

Print internal table

Hi ,
I have created a view with a table inside. This table is bound to a node that contains data from a service
call.
The view is embeded in the window and the data in the table can be displayed on the screen. I would like
to print this table. How do I code this? Please give me suggestions.
ps. I don't want to display in ALV format.
Thanks,
AS.

Hi Thomas,
I have created a view and a popup window. In this view context, I created a node that is bound to SFPPRIP structure.
I have user to enter output device (DEST) .
I don't know how to declear it_message and print_options to make the method PRINT to work.
Could you look at the code below and give me some suggestions on the input for the print method?
method GET_PRINT_PARAM .
* get print input
data: context_node type ref to if_wd_context_node,
          elem_print type ref to if_wd_context_element,
          stru_print type if_componentcontroller=>element_printing,
          item_dest like stru_print-dest.
context_node = wd_context->get_child_node( name = 'PRINTINT' ).
elem_print = context_node->get_element( ).
elem_print->get_attribute(
    exporting
      name = 'DEST'
    importing
      value = item_dest ).
*   fill the internal table
data: elem_sflightinfo type ref to if_wd_context_element,
         stru_sflightinfo type table of if_componentcontroller=>element_sflightinfo initial size 0,
         w_itab           like line of stru_sflightinfo.
     context_node = wd_context->get_child_node( name = 'SFLIGHTINFO').
     select * from sflight
      into corresponding fields of table stru_sflightinfo.
* BIND table to context node flighttab
call method context_node->bind_table
    exporting
      new_items = stru_sflightinfo.
* for print method
data: it_out type ref to data,
        it_message type ref to CL_BSP_MESSAGES. "I know it is wrong, but what should I use?
get reference of stru_sflightinfo into it_out.
wd_this->print(
*   col_def =                              " tableviewcontroltab
    itab     = it_out                      " ref to data
*   iterator =                               " ref to if_htmlb_tableview_iterator
    messages =   it_message      " ref to cl_bsp_messages(wrong. but what to pass?)
    print_options = item_dest     " sfpprip (I know it is wrong, but don't know what to pass?)
endmethod.
PRINT method
method PRINT .
FIELD-SYMBOLS: <tab> TYPE table.
ASSIGN itab->* TO <tab>.
****This sample uses the new ALV Object Model - Only available in WebAS 640+
****It will have to be changed (perhaps to use field catalogs and REUSE_ALV)
****in WebAS 620
DATA: table   TYPE REF TO cl_salv_table.
DATA: print_parameters TYPE pri_params,
        valid_flag(1) TYPE c.
****Convert the Input Print Parameters (Designed for Adobe Forms)
****Into the ABAP List format
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      authority              = print_options-authority
      copies                 = print_options-copies
      cover_page             = print_options-cover
      data_set               = print_options-dataset
      department             = print_options-division
      destination            = print_options-dest
      expiration             = print_options-lifetime
      immediately            = print_options-reqimm
      layout                 = 'X_65_255'
      list_name              = print_options-suffix2
      list_text              = print_options-covtitle
      new_list_id            = print_options-reqnew
      no_dialog              = abap_true
      receiver               = print_options-receiver
      release                = print_options-reqdel
    IMPORTING
      out_parameters         = print_parameters
      valid                  = valid_flag
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc = 0 OR valid_flag NE abap_true.
    messages->add_message2( condition = 'print'
                            message = 'Invalid Print Parameters'(e01) ).
    RETURN.
ENDIF.
****Start List Processing with our Print Parameters
NEW-PAGE PRINT ON PARAMETERS print_parameters
                    NO DIALOG.
****Create the ALV Object Model
DATA: salv_msg TYPE REF TO cx_salv_msg.
DATA: error_string TYPE string.
TRY.
      cl_salv_table=>factory(
        EXPORTING
          list_display = abap_true
        IMPORTING
          r_salv_table = table
        CHANGING
          t_table      = <tab> ).
    CATCH cx_salv_msg INTO salv_msg.
      messages->add_message_from_exception( condition = 'print'
                                            exception = salv_msg ).
      EXIT.
ENDTRY.
****Process the Column Definitions
DATA: columns TYPE REF TO cl_salv_columns_table.
****Get a reference to the columns object and set the optimize width.
columns = table->get_columns( ).
columns->set_optimize( abap_false ).
DATA: l_col_def TYPE tableviewcontroltab.
DATA: iterator_error TYPE REF TO cx_sy_dyn_call_illegal_method.
****We have an iterator Class - Process it and get a columun defintion table
IF col_def IS INITIAL AND
     iterator IS NOT INITIAL.
    DATA: p_overwrites TYPE tableviewoverwritetab.
    TRY.
        iterator->get_column_definitions(
             EXPORTING
               p_tableview_id = 'itab'
             CHANGING
               p_column_definitions = l_col_def
               p_overwrites         = p_overwrites ).
      CATCH cx_sy_dyn_call_illegal_method INTO iterator_error.
        messages->add_message_from_exception( condition = 'print'
                                              exception = iterator_error ).
        EXIT.
    ENDTRY.
*****User supplied a column definition table directly - us it
ELSEIF col_def IS NOT INITIAL.
    l_col_def = col_def.
ENDIF.
****Adjust our column definition (otherwise know as Field Catalog) by the
****Iterator or Column Dfinition table.
IF l_col_def IS NOT INITIAL.
    DATA: scrtext_l TYPE scrtext_l,
          scrtext_m TYPE scrtext_m,
          scrtext_s TYPE scrtext_s,
          tooltip   TYPE lvc_tip.
    DATA: col TYPE salv_t_column_ref.
    FIELD-SYMBOLS: <wa_col> LIKE LINE OF col,
                   <wa_col_def> LIKE LINE OF l_col_def.
****Get a listing of all columns
    col = columns->get( ).
****Loop through all the columsn
    LOOP AT col ASSIGNING <wa_col>.
****Read to see if the current columns is in our Iterator
      READ TABLE l_col_def ASSIGNING <wa_col_def>
            WITH KEY columnname = <wa_col>-columnname.
      IF sy-subrc = 0.
****Field is in the iterator - set it visible.
        <wa_col>-r_column->set_visible( abap_true ).
****Is there an override title in the Iterator - if yes
****use it for all the column headers of the output
        IF <wa_col_def>-title IS NOT INITIAL.
          scrtext_l = <wa_col_def>-title.
          scrtext_m = <wa_col_def>-title.
          scrtext_s = <wa_col_def>-title.
          <wa_col>-r_column->set_long_text( scrtext_l ).
          <wa_col>-r_column->set_medium_text( scrtext_m ).
          <wa_col>-r_column->set_short_text( scrtext_s ).
        ENDIF.
****Is there an override tooltip in the Interator - if yes
****ues it for the tooltip of the output (actually meaningless
****for only printing - but hey you never know what you might
****use this for in the future :)
        IF <wa_col_def>-tooltipheader IS NOT INITIAL.
          tooltip = <wa_col_def>-tooltipheader.
          <wa_col>-r_column->set_tooltip( tooltip ).
        ENDIF.
      ELSE.
****Field is not in the Iterator - Hide it in the output
        <wa_col>-r_column->set_visible( abap_false ).
      ENDIF.
    ENDLOOP.
ENDIF.
****Set the ALV to display (forces printing in the Dark = background or BSP)
table->display( ).
NEW-PAGE PRINT OFF.
messages->add_message2( condition   = 'print'
                          message     = 'Print Output is complete'(i01)
                          messagetype = 'I' ).
endmethod.
Your help is greatly appreciated.
AS.
Edited by: Anna Smith on Dec 18, 2008 4:25 PM

Internal table data 1E2 automatically convert to scientific format

Dear all,
I have been searched for solution moths from the forums and tried all possible methods, but still no way to solve my above problem. I found a way to solve it partially for us, but may be very helpful for others who meet similly case like mine, so I posted here.
my problem is when I export my internal table data to Excel, the Cell data with 1E2 auto becomes 1.00E02, and 1E8 becomes 1.00E08, we need it to be 1E2 and 1E8 in excel.
you can recreate my problem by
1, input 1E2 into your Microsoft Excel, then Enter, it will auto change into scientific format. which is we do not want.
2, use any of your SAP system open any table as long as there is a Char (>3) field in that table. add some
data entry in that field in the form "any amount (<15) of numeric 1 to 9"E"any one or two numeric 1 to 9". such as, 123E2, 1234E12 etc. then save this table's data to local file spread sheet, or use any FM to download it to a Excel file, when you open this
file by Excel, the cell with above form will display as scientific. but
if you put three or more numeric after the "E", such as 123E123 it will
display correctly.
what I have done:
I searched in SCN for similar thread:
    Export to Excel 2007 - item number problem
    Exceding the limit of numbers in Excel at target side
    Excel download cell format problem
    Formating as Text in excel through SAP
    Converting of amount field into excel file through GUI DOWNLOAD
    Data downloaded to excel gets converted to exponential format.
    Problem with Excel download   and scientific number
    Re: Issue in displaying numbers in Excel?
    CSV Flat File Data Problem (Number converting to Scientific Notation)
Tested accordingly, But none of these works in our case. because our
ultimate receiver of email attachment will be external third party, we cannot ask
them to change anything in their Excel.
Search Microsoft help about Excel, http://support.microsoft.com/kb/214233,
and it says this "Automatic Number Formatting" is a normal behaviour of excel.
no way to turn it off, the "work-around" way that Microsoft provides is not suitable for our
case.
We test CL_iXML recently arrording to weblog http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment
it successful controled the format. so this could be a solution for others whose internal table size is small. but our 2MB internal table bocome 6MB when converted to xml file attachment, which cannot be received by our end user's mail box. too big.
So please advise your ideas.
Many thanks in advance!
Peter Ding
Thank you very much for your time!

Hi,
You can achieve this by describing the spreadsheet in XML with the help of the DOM classes.
The later releases of Excel can read and save spreadsheets as XML, providing your release supports this you can achieve it.
Check out the following Wiki
[Excel - XML|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/exporting%2bdata%2bto%2bexcel%2b-%2bxml%2bto%2bthe%2brescue]
Regards,
Darren

Internal Table Data to XML

Hi
I have a requirement of writing internal table data to XML. Any idea where i should start.
I have pretty good experience with ABAP and basic knowledge in XML.
There are good blogs which talk about transformations and other stuff but they are not able to give me clear path to my solution.
Could somebody give me a basic example or some reference material where i can move the data in internal table (assume Sales order details of a day) to XML.
Thanks

Refer the program -
In this implementation we will only focus on the creation of the XML file and the transfer to the user. You can not create a XML document directly. You have to use a so called ixml factory first.
TYPE-POOLS: ixml.
DATA: l_ixml TYPE REF TO if_ixml.
l_ixml = cl_ixml=>create( ).
This iXML factory can create an empty XML document object named l_document.
DATA: l_document TYPE REF TO if_ixml_document.
        l_document = l_ixml->create_document( ).
At this point you can add the nodes (elements, attributes) into the document. First you have to declare the root element node.
DATA: l_element_root TYPE REF TO if_ixml_element.
This node we have to give a name and add it (create_simple_node) to the document object l_document, which will be the parent of this node.
l_element_root = l_document->create_simple_element(
            name = 'flights'
          parent = l_document ).
Next we can add child nodes to there parent node using the same method of the document object.
DATA: l_element_airline TYPE REF TO if_ixml_element,
l_element_airline = l_document->create_simple_element(
               name = 'airline'
             parent = l_element_root ).
An attribute can be add easily using the method set_attribute of the element node.
l_rc = l_element_airline->set_attribute( name = 'code' value = 'LH401' ).
Now we have finished the document object. Regretfully it can not be displayed in any form due to the fact that it is a binary object.
The next step is to convert the created document to a flat file. To achieve this we have to create a stream factory, which will help us to create an output stream.
DATA: l_streamfactory   TYPE REF TO if_ixml_stream_factory.
l_streamfactory = l_ixml->create_stream_factory( ).
In this case, we will convert the document into an output stream which is based on an internal table of type x.
TYPES: BEGIN OF xml_line,
          data(256) TYPE x,
        END OF xml_line.
DATA: l_xml_table       TYPE TABLE OF xml_line,
        l_xml_size        TYPE i,
        l_rc              TYPE i,
        l_ostream         TYPE REF TO if_ixml_ostream.
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
When we have created the output stream we can do the rendering from the document into the stream. The XML data will be stored in the internal table automatically.
DATA: l_renderer        TYPE REF TO if_ixml_renderer.
l_renderer = l_ixml->create_renderer( ostream = l_ostream
                        & nbsp;              document = l_document ).
l_rc = l_renderer->render( ).
In the last step we upload the file to the sapgui
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
   EXPORTING
     bin_filesize = l_xml_size
     filename     = 'c:\temp\flights.xml'
     filetype     = 'BIN'
   CHANGING
     data_tab     = l_xml_table
   EXCEPTIONS
     OTHERS       = 24.
This finished the first step-of-three. As mentioned before the next log will focus on the conversion from xml files (back) to abap tables.
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
          data(256) TYPE x,
         END OF xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_ostream         TYPE REF TO if_ixml_ostream,
        l_renderer        TYPE REF TO if_ixml_renderer,
        l_document        TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
        l_element_airline TYPE REF TO if_ixml_element,
        l_element_flight TYPE REF TO if_ixml_element,
        l_element_from    TYPE REF TO if_ixml_element,
        l_element_to      TYPE REF TO if_ixml_element,
        l_element_dummy   TYPE REF TO if_ixml_element,
        l_value           TYPE string.
DATA: l_xml_table       TYPE TABLE OF xml_line,
        l_xml_size        TYPE i,
        l_rc              TYPE i.
DATA: lt_spfli          TYPE TABLE OF spfli.
DATA: l_spfli           TYPE spfli.
START-OF-SELECTION.
Fill the internal table
    SELECT * FROM spfli INTO TABLE lt_spfli.
Sort internal table
    SORT lt_spfli BY carrid.
Start filling xml dom object from internal table
    LOOP AT lt_spfli INTO l_spfli.
      AT FIRST.
      Creating a ixml factory
        l_ixml = cl_ixml=>create( ).
      Creating the dom object model
        l_document = l_ixml->create_document( ).
      Fill root node with value flights
        l_element_flights = l_document->create_simple_element(
                    name = 'flights'
                    parent = l_document ).
      ENDAT.
      AT NEW carrid.
      Create element 'airline' as child of 'flights'
        l_element_airline = l_document->create_simple_element(
                    name = 'airline'
                    parent = l_element_flights ).
      Create attribute 'code' of node 'airline'
        l_value = l_spfli-carrid.
        l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
      Create attribute 'name' of node 'airline'
        SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
        l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
      ENDAT.
      AT NEW connid.
      Create element 'flight' as child of 'airline'
        l_element_flight = l_document->create_simple_element(
                    name = 'flight'
                    parent = l_element_airline ).
      Create attribute 'number' of node 'flight'
        l_value = l_spfli-connid.
        l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
      ENDAT.
    Create element 'from' as child of 'flight'
      CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
      l_element_from = l_document->create_simple_element(
                  name = 'from'
                  value = l_value
                  parent = l_element_flight ).
    Create attribute 'airport' of node 'from'
      l_value = l_spfli-airpfrom.
      l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
    Create element 'to' as child of 'flight'
      CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
      l_element_to = l_document->create_simple_element(
                  name = 'to'
                  value = l_value
                  parent = l_element_flight ).
    Create attribute 'airport' of node 'from'
      l_value = l_spfli-airpto.
      l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
    Create element 'departure' as child of 'flight'
      l_value = l_spfli-deptime.
      l_element_dummy = l_document->create_simple_element(
                  name = 'departure'
                  value = l_value
                  parent = l_element_flight ).
    Create element 'arrival' as child of 'flight'
      l_value = l_spfli-arrtime.
      l_element_dummy = l_document->create_simple_element(
                  name = 'arrival'
                  value = l_value
                  parent = l_element_flight ).
    Create element 'type' as child of 'flight'
      CASE l_spfli-fltype.
        WHEN 'X'.
          l_value = 'Charter'.
        WHEN OTHERS.
          l_value = 'Scheduled'.
      ENDCASE.
      l_element_dummy = l_document->create_simple_element(
                  name = 'type'
                  value = l_value
                  parent = l_element_flight ).
    ENDLOOP.
    IF sy-subrc NE 0.
      MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
    ENDIF.
Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
    l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
Rendering the document
    l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                          document = l_document ).
    l_rc = l_renderer->render( ).
Saving the XML document
    l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = 'c:\temp\flights.xml'
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
<?xml version="1.0"?>
<flights>
     <airline code="AA" name="American Airlines">
          <flight number="0017">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>110000</departure>
               <arrival>140100</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0064">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>090000</departure>
               <arrival>172100</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="AZ" name="Alitalia">
          <flight number="0555">
               <from airport="FCO">ROME,IT</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>190000</departure>
               <arrival>210500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0788">
               <from airport="FCO">ROME,IT</from>
               <to airport="TYO">TOKYO,JP</to>
               <departure>120000</departure>
               <arrival>085500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0789">
               <from airport="TYO">TOKYO,JP</from>
               <to airport="FCO">ROME,IT</to>
               <departure>114500</departure>
               <arrival>192500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0790">
               <from airport="FCO">ROME,IT</from>
               <to airport="KIX">OSAKA,JP</to>
               <departure>103500</departure>
               <arrival>081000</arrival>
               <type>Charter</type>
          </flight>
     </airline>
     <airline code="DL" name="Delta Airlines">
          <flight number="1984">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>100000</departure>
               <arrival>182500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="1699">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>171500</departure>
               <arrival>203700</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0106">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>193500</departure>
               <arrival>093000</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="JL" name="Japan Airlines">
          <flight number="0407">
               <from airport="NRT">TOKYO,JP</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>133000</departure>
               <arrival>173500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0408">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="NRT">TOKYO,JP</to>
               <departure>202500</departure>
               <arrival>154000</arrival>
               <type>Charter</type>
          </flight>
     </airline>
     <airline code="LH" name="Lufthansa">
          <flight number="2407">
               <from airport="TXL">BERLIN,DE</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>071000</departure>
               <arrival>081500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="2402">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SXF">BERLIN,DE</to>
               <departure>103000</departure>
               <arrival>113500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0402">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>133000</departure>
               <arrival>150500</arrival>
               <type>Charter</type>
          </flight>
          <flight number="0401">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>183000</departure>
               <arrival>074500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0400">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>101000</departure>
               <arrival>113400</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="QF" name="Qantas Airways">
          <flight number="0005">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>225000</departure>
               <arrival>053500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0006">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SIN">SINGAPORE,SG</to>
               <departure>205500</departure>
               <arrival>150500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="SQ" name="Singapore Airlines">
          <flight number="0988">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="TYO">TOKYO,JP</to>
               <departure>163500</departure>
               <arrival>001500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0158">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="JKT">JAKARTA,ID</to>
               <departure>152500</departure>
               <arrival>160000</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0015">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="SIN">SINGAPORE,SG</to>
               <departure>160000</departure>
               <arrival>024500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="0002">
               <from airport="SIN">SINGAPORE,SG</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>170000</departure>
               <arrival>192500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
     <airline code="UA" name="United Airlines">
          <flight number="0941">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="SFO">SAN FRANCISCO,US</to>
               <departure>143000</departure>
               <arrival>170600</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3504">
               <from airport="SFO">SAN FRANCISCO,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>150000</departure>
               <arrival>103000</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3516">
               <from airport="JFK">NEW YORK,US</from>
               <to airport="FRA">FRANKFURT,DE</to>
               <departure>162000</departure>
               <arrival>054500</arrival>
               <type>Scheduled</type>
          </flight>
          <flight number="3517">
               <from airport="FRA">FRANKFURT,DE</from>
               <to airport="JFK">NEW YORK,US</to>
               <departure>104000</departure>
               <arrival>125500</arrival>
               <type>Scheduled</type>
          </flight>
     </airline>
</flights>
Regards,
Amit
Reward all helpful replies.

Internal table data to XML file.

Hi All,
May I know how can we convert the internal table data to xml file?
Regards
Ramesh.

Re: Convert XML to internal Table
Go through the link..u should be able to solve the problem..

PDF File from an internal table data

I have an internal table ready for grid display of a report. But according to the new requirement, it shouldn't create a Spool request as it is affecting the performance of the system (because its a huge file with 3000+ pages).
So, now we want to create a (non-editable) PDF File and store it in an application server.
From the forum, i see that i have only one option, which is to Convert internal table data to OTF Format and then to PDF.
Right now i am using PRINT_TEXT to convert to OTF file and FM CONVERT_OTF for PDF file.
The challenges i am facing right now is..
1. After getting the OTF file from PRINT_TEXT, i couldn't get the correct PDF File. It shows random characters instead..
2. My internal table has 103 columns. So how should i accommodate data from all these columns into a single row on a PDF?
3. I couldn't create a table kind of view/display in PDF
Please help/advice me on the above issue.
Thanks,
Sarada

Hi,
103 columns need to be seen in at least 7 pages or more. Cant display in just 1 page.
I guess that better to create a smartforms and pass all the information from the table to the smartforms.
There you can create multipages.
Probably, that huge table need to separete it in 7 tables, so each page will get the information from one table...
i will try to do sth like that.
Regards
Miguel

Problem converting data in XML file to internal table data

Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_parser          TYPE REF TO if_ixml_parser,
        l_istream         TYPE REF TO if_ixml_istream,
        l_document        TYPE REF TO if_ixml_document,
        l_node            TYPE REF TO if_ixml_node,
        l_xmldata         TYPE string.
DATA: l_elem            TYPE REF TO if_ixml_element,
        l_root_node       TYPE REF TO if_ixml_node,
        l_next_node       TYPE REF TO if_ixml_node,
        l_name            TYPE string,
        l_iterator        TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table       TYPE TABLE OF t_xml_line,
        l_xml_line        TYPE t_xml_line,
        l_xml_table_size TYPE i.
DATA: l_filename        TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
    l_ixml = cl_ixml=>create( ).
Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
    l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
                                                    size = l_xml_table_size ).
Creating a document
    l_document = l_ixml->create_document( ).
Create a Parser
    l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
Validate a document
    IF pa_val EQ 'X'.
      l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
    ENDIF.
Parse the stream
    IF l_parser->parse( ) NE 0.
      IF l_parser->num_errors( ) NE 0.
        DATA: parseerror TYPE REF TO if_ixml_parse_error,
              str        TYPE string,
              i          TYPE i,
              count      TYPE i,
              index      TYPE i.
        count = l_parser->num_errors( ).
        WRITE: count, ' parse errors have occured:'.
        index = 0.
        WHILE index < count.
          parseerror = l_parser->get_error( index = index ).
          i = parseerror->get_line( ).
          WRITE: 'line: ', i.
          i = parseerror->get_column( ).
          WRITE: 'column: ', i.
          str = parseerror->get_reason( ).
          WRITE: str.
          index = index + 1.
        ENDWHILE.
      ENDIF.
    ENDIF.
Process the document
    IF l_parser->is_dom_generating( ) EQ 'X'.
      PERFORM process_dom USING l_document.
    ENDIF.
*&      Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
                              l_xml_table      TYPE STANDARD TABLE.
Local variable declaration
    DATA: l_len      TYPE i,
          l_len2     TYPE i,
          l_tab      TYPE tsfixml,
          l_content TYPE string,
          l_str1     TYPE string,
          c_conv     TYPE REF TO cl_abap_conv_in_ce,
          l_itab     TYPE TABLE OF string.
    l_filename = pa_file.
upload a file from the client's workstation
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename   = l_filename
        filetype   = 'BIN'
      IMPORTING
        filelength = l_xml_table_size
      CHANGING
        data_tab   = l_xml_table
      EXCEPTIONS
        OTHERS     = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Writing the XML document to the screen
    CLEAR l_str1.
    LOOP AT l_xml_table INTO l_xml_line.
      c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
      c_conv->read( IMPORTING data = l_content len = l_len ).
      CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    WRITE: /.
    WRITE: /' XML File'.
    WRITE: /.
    LOOP AT l_itab INTO l_str1.
      REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
        l_str1 WITH space.
      WRITE: / l_str1.
    ENDLOOP.
    WRITE: /.
ENDFORM.                    "get_xml_table
*&      Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
    DATA: node      TYPE REF TO if_ixml_node,
          iterator TYPE REF TO if_ixml_node_iterator,
          nodemap   TYPE REF TO if_ixml_named_node_map,
          attr      TYPE REF TO if_ixml_node,
          name      TYPE string,
          prefix    TYPE string,
          value     TYPE string,
          indent    TYPE i,
          count     TYPE i,
          index     TYPE i.
    node ?= document.
    CHECK NOT node IS INITIAL.
    ULINE.
    WRITE: /.
    WRITE: /' DOM-TREE'.
    WRITE: /.
    IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
    iterator = node->create_iterator( ).
get current node
    node = iterator->get_next( ).
loop over all nodes
    WHILE NOT node IS INITIAL.
      indent = node->get_height( ) * 2.
      indent = indent + 20.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
        element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
          WRITE: / 'ELEMENT :'.
          WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
          IF NOT nodemap IS INITIAL.
          attributes
            count = nodemap->get_length( ).
            DO count TIMES.
              index = sy-index - 1.
              attr   = nodemap->get_item( index ).
              name   = attr->get_name( ).
              prefix = attr->get_namespace_prefix( ).
              value = attr->get_value( ).
              WRITE: / 'ATTRIBUTE:'.
              WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
                               value COLOR COL_TOTAL   INVERSE.
            ENDDO.
          ENDIF.
        WHEN if_ixml_node=>co_node_text OR
             if_ixml_node=>co_node_cdata_section.
        text node
          value = node->get_value( ).
          WRITE: / 'VALUE     :'.
          WRITE: AT indent value COLOR COL_GROUP INVERSE.
      ENDCASE.
    advance to next node
      node = iterator->get_next( ).
    ENDWHILE.
ENDFORM.                    "process_dom
Any help would be highly apperciated.
regards,
Jessica Sam

Pavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
    LineNumber
    SKUNumber
    OrderedQuantity
    ShippedQuantity
    UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
      <VendorNumber>1000</VendorNumber>
      <OrderNumber>P00009238</OrderNumber>
      <OrderType>Stock</OrderType>
      <Company />
      <Division />
     <Department />
     <Date>20061120</Date>
     <CartonCount>2</CartonCount>
     <ShipAllProducts>No</ShipAllProducts>
-             <ShipmentDetail>
                  <TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
                  <Freight>000000010000</Freight>
                  <ShipmentDate>20061120</ShipmentDate>
                  <ShipmentMethod>UPS1PS</ShipmentMethod>
             </ShipmentDetail>
-            <ProductInformation>
                 <LineNumber>000000001</LineNumber>
                 <SKUNumber>110FR</SKUNumber>
                 <AdvSKUNumber>003 4518</AdvSKUNumber>
                 <SKUID />
                 <OrderedQuantity>00000001000000</OrderedQuantity>
                 <ShippedQuantity>00000001000000</ShippedQuantity>
                 <UOM>EA</UOM>
                 <Factor>1</Factor>
            </ProductInformation>
-           <ProductInformation>
                <LineNumber>000000002</LineNumber>
                <SKUNumber>938EN</SKUNumber>
                <AdvSKUNumber>001 7294</AdvSKUNumber>
                <SKUID />
                <OrderedQuantity>00000000450000</OrderedQuantity>
                <ShippedQuantity>00000000450000</ShippedQuantity>
                <UOM>EA</UOM>
                <Factor>1</Factor>
            </ProductInformation>
-           <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
             <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
         VendorNumber(10)     TYPE n,
         OrderNumber(20)      TYPE n,
         OrderType(8)         TYPE c,
         Date(8)              TYPE c,
       END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
         TrackingNumber(30)     TYPE n,
         Freight(12)            TYPE n,
         Weight(14)             TYPE n,
         ShipmentDate(8)        TYPE c,
         ShipmentMethod(8)      TYPE c,
         END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
         LineNumber(9)          TYPE n,
         SKUNumber(20)          TYPE c,
         OrderedQuantity(14)    TYPE n,
         ShippedQuantity(14)    TYPE n,
         UOM(4)                 TYPE c,
         END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment               TYPE STANDARD TABLE OF ts_shipment,
      gs_shipment               TYPE ts_shipment.
DATA: gt_shipmentdetail         TYPE STANDARD TABLE OF ts_shipmentdetail,
      gs_shipmentdetail         TYPE ts_shipmentdetail.
DATA: gt_productinformation     TYPE STANDARD TABLE OF ts_productinformation,
      gs_productinformation     TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION z_xml_to_abap3
    SOURCE XML gt_itab
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :',      gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:',     gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :',           gs_shipmentdetail-Freight.
WRITE: / 'Weight :',           gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :',     gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :'    gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:',         gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :',         gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :',              gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPMENT>
          <xsl:apply-templates select="//OrderShipment"/>
        </ISHIPMENT>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
    <item>
      <VENDORNUMBER>
        <xsl:value-of select="VendorNumber"/>
      </VENDORNUMBER>
      <ORDERNUMBER>
        <xsl:value-of select="OrderNumber"/>
      </ORDERNUMBER>
      <ORDERTYPE>
        <xsl:value-of select="OrderType"/>
      </ORDERTYPE>
      <DATE>
        <xsl:value-of select="Date"/>
      </DATE>
    </item>
</xsl:template>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPDET>
          <xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
        </ISHIPDET>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
    <item>
      <TRACKINGNUMBER>
        <xsl:value-of select="TrackingNumber"/>
      </TRACKINGNUMBER>
      <FREIGHT>
        <xsl:value-of select="Freight"/>
      </FREIGHT>
      <SHIPMENTDATE>
        <xsl:value-of select="ShipmentDate"/>
      </SHIPMENTDATE>
      <SHIPMENTMETHOD>
        <xsl:value-of select="ShipmentMethod"/>
      </SHIPMENTMETHOD>
    </item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica   Sam

Sending internal table data to application server as an XML file

Hi All,
I am trying to send the internal table data to application server which should be stored in XML format.
I am using the following code:
DATA:
          result TYPE xstring.
        CALL TRANSFORMATION id
        SOURCE tab = p_output-xsfdata
        RESULT XML result.
        OPEN DATASET l_xml_full_path FOR OUTPUT IN BINARY MODE.
        TRANSFER result TO l_xml_full_path.
        CLOSE DATASET l_xml_full_path.
And the content in the internal table is :
3C3F786D6C2076657273696F6E3D22312E30223F3E3C736620786D6C6E733D2275726E3A736
73796D206E616D653D22534653592D44415445223E30362F31302F323030393C2F73796D3E2
50617961626C653C6E65772D6C696E652F3E50617274206F6620746865204E616D653C6E657
.......and so on
With this a file is getting created on the application server, but the data is not correct. I am getting the data something like:
<?xml version="1.0" encoding="utf-8"?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><TAB><item>
PD94bWwgdmVyc2lvbj0iMS4wIj8+PHNmIHhtbG5zPSJ1cm46c2FwLWNv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==</item>
<item>c3ltIG5hbWU9IlNGU1ktREFURSI+MDYvMTAvMjAwOTwvc3ltPiA8c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 anyone tell me the reason why am I getting the data in this way?
Thanks in advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 10, 2009 5:44 PM

HI,
Use this FM SAP_CONVERT_TO_XML_FORMAT to convert the data to XML format and then upload the convert data from the internal table to Application server.

How to send internal table data through mail from report in foreground

hi all,
iam trying to convert the internal table data into excel format and sending it through mail by runnning the report in foreground.
mail is going sucessfully with excel format,but iam facing the problem in the excel format of the material column as follows:
the matrno shows the wrong format -2.63E+11 instead of displaying correct format-263215000000.
Pls suggest the alternative process for the above mentioned problem.
Thanks,
Sivagopal R.

Hi Siva,
Try to copy 263215000000 in one of the cells of excel sheet and press enter.It will automatically convert into -2.63E+11 .
This means the default formatting of the excel sheet makes this happen.If you convert the format of the cell to "NUMBER" then u will get the required result.
But I doubt whether or not it is possible through ABAP programming.
Regards,
Vimal.

How to download internal table data to .xlsx file ?

Hello All,
I am using SAP ECC 6.0. I need to download internal table data to .xlsx file.
I tried GUI_DOWNLOAD, all the data are getting transferred to the .xlsx file, but while opening I am getting the below error.
Excel cannot open the file "download.xlsx" because file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
Though Microsoft office 2007 is installed in my system.
Please help <removed by moderator>.
Edited by: Thomas Zloch on Oct 24, 2011 10:55 AM

Hi,
Please find the below code to download data into excel file.
DATA: ld_filename TYPE string,
        ld_path TYPE string,
        ld_fullpath TYPE string,
        ld_result TYPE i.
Display save dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
     window_title      = ' '
      DEFAULT_EXTENSION = 'XLS'
      default_file_name = 'accountsdata'
      INITIAL_DIRECTORY = 'c:\temp\'
    CHANGING
      filename          = ld_filename
      path              = ld_path
      fullpath          = ld_fullpath
      user_action       = ld_result.
Check user did not cancel request
CHECK ld_result EQ '0'.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
        filename         = ld_fullpath
        filetype         = 'ASC'
      APPEND           = 'X'
        write_field_separator = 'X'
      CONFIRM_OVERWRITE = 'X'
   TABLES
        data_tab         = it_datatab[]     "need to declare and populate
   EXCEPTIONS
        file_open_error = 1
        file_write_error = 2
        OTHERS           = 3.
Thanks and Regards
Chitra

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

Printing internal table data

Similar Messages

Maybe you are looking for