Printing is pushed off the right side of the page

I uninstalled and reinstalled the printer driver on my epson 1400. No matter what size I try to print, everything is pushed off the right side of the page. This is only happening in photoshop. I am using a mac G4 on os x 10.4.11 Maybe someone else has had this problem. Thank you for your time.

Russellohfive wrote:
…then walah! …
Is that an Islamic incantation? Or did you mean voilà?
Just kidding. Glad you're up and running.
voilà
Also found in: Wikipedia
0.03 sec.
voi·là
(vwä-lä)
interj.Used to call attention to or express satisfaction with a thing shown or accomplished: Mix the ingredients, chill, andvoilà!a light, tasty dessert.
[French : voi, second person sing. imperative of voir, to see (from Old French; see voyeur) + là, there (from Old French la, lai, probably from Latin illc, by that way : ill; see al-1 in Indo-European roots + -ce, deictic particle).]
The American Heritage® Dictionary of the English Language, Fourth Edition copyright ©2000 by Houghton M

Similar Messages

How do you adjust Firefox to print what is on email page without adding a 1 inch left marghin to that page as it cuts off some of the right side of the page?

When I receive an email the page often has a certificate that I would like to print. Using the print function at the top of the page brings up the email as a page as it looks in my web email. When I hit the print button on that page there is always a 1 inch margin added to the printed page cutting off the right side of the desired page to be printed.
My printer accepts what ever I send it from word, pdf files as they appear on the screen, Why doe Firefox not send the same images as is displayed to the printer?
This seems to occur whenever the screen shows an image that is almost border to border and not text. When a margin is part of the email message or it is text this doesn't seem to occur.
HELP Please. I really need to be able to print what is displayed to print the proper document.
Thanks
Bob Ferguson
Sonoran Consulting & Finance, LLC

Some pages add their own margin to the minimum margin set in Page Setup. First you might reduce the margin here:
Alt+f (displays the classic File menu) > Page Setup > Margins & Header/Footer tab
Second, you could try using Shrink to Fit. However, if the image is a background image rather than part of the content of the page, that might not have any effect.

Why are some text missing from the right side of a page I send to my printer? Thanks

Why is some of the text missing on the right side of a page I send to my printer?

I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.

Printout are printed to the right side of the paper

Printout are printed to the right side of the paper
all other settings are ok but the text is printed too much to the right side

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

On my Mac, when I exit "full screen" with ICAL, ICAL disappears. It appears to slide off to the right side of the screen.

On my Mac, when I exit "full screen" with ICAL, ICAL disappears. It appears to slide off to the right side of the screen.

Create a New Profile as a test to check if your current profile is causing the problems.
-> Basic Troubleshooting: Make a New Profile
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
-> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
-> Recovering important data from an old profile
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
Check and tell if its working.

When I boot Firefox on my laptop it quickly walks off the right side of the monitor and I cannot interact with the screen, even to pull it back onto the screen

When I boot Firefox the initial screen comes up but it queickly 'walks' off the right side of the desktop screen, and I cannot locate it to bring it back into view. I recently added a graphics projector and had to change my display values so that the computer would output to the projector. Do I need to change something back. This only happens with Firefox.
== This happened ==
Every time Firefox opened
== I change my display seetings to enable a graphics projector. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

looks like it is not the problem with firefox, ask your husband. through my experience of using firefox there is no poof-off stuff.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!

I need to place icons (Next, Back, Print, Show) on the right side of the page.

The current solution is to use the following in the CSS.
div.options {
position:relative;
        width:100%;
        left: 860px;
        padding:2%;
        background:transparent !important;
However, this solution locks the icons to the right and they do not move when the window is sized:
Is there a responsive method I can use to accomplish my goal?
I am using RoboHelp 10.
Thanks - Dan

Hello William,
Silly me. I’m using HTML5 – Desktop layout.
I know just enough HTML to get myself in trouble. I started with your “PnP-WH-Generic” layout and got it to this point:
Your first suggestion moves the icons to the right side of the screen. I need them to be as shown above.
Here’s the relevant (I believe) HTML:
And here’s what I believe is the applicable CSS info:
div.content
div.toolbarbuttons
div.toolbarbuttons > div
div.logo
div.searchsimple
div.options
div.printbutton
div.header div.showhidebutton {
                height: 23px;
                line-height: 23px;
                float: left;
                margin-top: 5px;
                margin-left: .8em;
                font-size: .8em;
                padding: 0;
                width: auto;
Thanks for your help!
Dan

Black bar along the right side and the bottom of the screen- DV5-1007ca

I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

Bookmarks - Hate the firefox version. Double click on the site to bookmark and the book it too small. And when in the bookmark window on the right side of the screen there is no way to know which folder you are actually in. Help.

Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?
For instance I view an apartment ad which has various pictures attached. It says click on the pictures to see an enlarged version. FF opens the page however most of the page is blank and the picture appears to be pushed to the right side of the page and shows as if it has been scrunched agains the right side not showing the whole picture.
What Can I do to correct this?

I see that you have increased some font sizes considerably.
* font.size.fixed.x-western: 20
* font.size.variable.x-western: 22
This can effect margins when the website specifies these as em values and cause content to shift.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Note that your System Details List shows multiple Flash plugins.
* Shockwave Flash 16.0 r0
*Shockwave Flash 12.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You can delete this user.js and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Position of the days and dates being on the right side of the day in the week calendar.

I'm having a huge problem with the days and dates being on the right side of the day in the week calendar. Can I change that to the left upper side?
it makes the whole schedule off balance you see.

Thanks for stating that. So quickly. That *****. I also now see that more people have problems with this. Where can I complain?

Hi...I can't get a new window to come up when I click on the + sign at the little tab on the right side of the existing browser window. I also can not get a new window to come up when I click on "Control + T". Any suggestions? Thanks!

I would like to be able to open a new window by clicking on the little plus sign at the right side of the existing open browser window. I used to be able to do that and something unknown happened that has taken that ability away. Thanks!

You need to access the router and change the wifi network name from the default which right now is the router name (linksys, netgear ect).
You want to use WPA2 encryption and you want a password that for now is 1,2,3,4,5,6,7,8. (no , in there). Put the same on the guest network.
Don't setup the "N" network yet, just use the b,g,,n for now just to get it working.
Save those settings on the left pane on the router page on the bottom.
Go find the wireless with the name you put in, whatever you used.
Settings, wifi
Under choose a network the wifi you have just setup should be listed.
If its not there do this
Settings, cellular data.....is this an tion, is it on? Turn cellular data off if it's on. Then go back to settings, wifi and try that again.

MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
HELP!
Here is a picture

For an out-of-warranty replacement phone:
149.00 USD
=
94.6872 GBP

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Printing is pushed off the right side of the page

Similar Messages

Maybe you are looking for