Printing is unclear and black lettering does not print at all when I use my PC

I have an all in one 4500 wirless G521n Printer. It prints perfect from my tablet E Print but when I print from my computer the black ink does not print and the color text print does not print fully. All the settings are correct according to the HP scan. Any help would be greatly appreciated.

MON IMPRIMANTE HP DESKJET 1510 IMPRIME UNE PAGE BLANCHE. j'AI UTILISÉ LE TRUC "DESKJET 6980 SERIES ET ÇA NE FONCTIONNE PAS PLUS.mES CARTOUCHES SONT D'ORIGINE ET MON IMPRIMANTE DIT LE CONTRAIRE ET DOUTE DE L'AUTHENCITÉ. QUOI FAIRE À PART LA JETER ET EN ACHETER D'UNE AUTRE MARQUE ?????JE N'UTILISE PAS BEAUCOUP ET JE NE VOIS PAS QU'ON ME DISE QUE L'ENCRE EST ÉPUISÉE.SUNNYBOYCAN

Similar Messages

FMLE 3 and 3.1 does not open at all in vista

Hi,
Adobe FMLE 3 and 3.1 does not start at all in vista. Its a 32-bit machine. 512MB RAM. Can anyone give me some clues?
Thanks

It happend to me to on windows 7, when I exchange Black magic car with Ospray. After I uninstalled drivers for black magic, FMLE started fine.

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

I have just updated my iPhone to version 5.1, and the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. Can someone help??

I have just updated my iPhone to version 5.1. After the update, the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. It happens to my friends as well. What should I do? Can someone help?? Thanks!!!!

Slide the camera button up

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

My iphone 4 does not ring for messages when i use the handsfree..

my iphone 4 does not ring for messages when i use the handsfree..

iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.

Alignment failure and Black ink does not print

Aligning failure message.
Black ink does not print.
I selected clean print head-more than once.
This question was solved.
View Solution.

Hi @privat_
I'd like to help you be able to print again. I understand your colored cartridges are working, but the black ink is not. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Officejet 6500 All-in-On...
If you complete all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if he printer and printhead are out of warranty. Hot Water Printhead Flush - HP Ink Series Printers with removable Printhead.
I have recommended this solution to others and have seen success, but I can not guarantee this will resolve the issue, it is an end of the line kind of effort. I hope it helps.
PaganC wrote:
flushing it worked, Yeah!!!!!!! thanks for your help.
Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on a newer model, or discuss the option of replacing the printhead! If after all of our efforts the issue remains, I suggest calling HP. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Thanks for reaching out to the HP Forums. I hope one of my recommendations resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Can I get rid of 36? It installed an update and now firefox does not work at all

firefox 36 is seriously broken
It updated on my computer and now does not work at all. I've tried all the suggestions and no help.....going back to IE

Hi wskossack, I am sorry to hear that you are having problems with Firefox 36. I am also sorry that we have not been able to get that working for you yet.
If what you really want is to uninstall Firefox we can do that. Of course I have to ask if you would be willing to let my help you to get the most up to date version of Firefox working. But, Firefox is all about the ability to customize. If you want we can install the last version of Firefox and you can use that until the next version comes out or while we work to get Firefox 36 working for you. I will try to cover every option in my reply.
First I will cover uninstalling Firefox. If you want to look at the [[Uninstall Firefox from your computer|article click here]] this can be done in about 7 steps
I would recommend that you completely uninstall Firefox and install it again. This will most likely fix any problems you have right now. Because you are asking how to do this I am going to assume that you have not tried this.
If you have Vista or Windows 7:
1) close any open Firefox windows.
2) from the start menu click on control panel
3) click on uninstall a program
4) from this list chose Firefox
5) click on uninstall (this is located turds the top)
If the Uninstall Wizard does not run, you can start it manually by running helper.exe, which is located in one of these locations by default:
(32-bit Windows) C:\Program Files\Mozilla Firefox\uninstall\helper.exe
(64-bit Windows) C:\Program Files (x86)\Mozilla Firefox\uninstall\helper.exe
6) in the Firefox uninstall wizard click next and on the next page click uninstall then click finish
7) to remove other files and folders that may not be removed by the uninstall, you must manually delete the Firefox installation folder, which is located in one of these locations by default:
(32-bit Windows) C:\Program Files\Mozilla Firefox
(64-bit Windows) C:\Program Files (x86)\Mozilla Firefox
The uninstaller does not remove any user data such as history or bookmarks. To completely remove this data, you must manually delete the Firefox folder containing your user profile:
Click the Windows Start button.
Type %APPDATA% in the search field and press enter to open the hidden Roaming folder.
Open the Mozilla folder
Delete the Firefox folder.
Now I am going to go over how to get the last version of Firefox installed on your computer. If you want to look at the [[Install an older version of Firefox|article click here]] . If you decide that this is what you want to do please look at the article for some impotent security information.
Firefox 35.0.1 was the last version of Firefox and you can get it by [https://download-installer.cdn.mozilla.net/pub/firefox/releases/35.0.1/win32/en-US/Firefox%20Setup%2035.0.1.exe clicking here] . The link is also in the article. If you do this you will have to disable the auto update. To do this go to options, then go to advance. Under advance there will be a sub tab. You want to go to update. Then you can select to never check or to have it tell you when there is an update.
So the only thing left is for me to help you with any problems you are having with Firefox 36. I hope you will give me a chance. In any case, if you need any more information or help with anything that I went over please let me know.

Tried to update the software on my i pod touch and now it does not work at all and wont restore either

tried to update software on i pod touch but would not work and now ,wont restore back to factory setting or anything

Without more information all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod does not respond at all when plugged in

Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------

Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

ITunes does NOT detect network connection when I use a 3G modem

Hi
since christmas iTunes has not been able to update when i commute, using a 3G USB modem. Over enabled and live WLAN or Ethernet interfaces everything works fine, but TCPdump does not register any packets at all from iTunes when only the USB 3G modem is up. All other networking activities work in this state, but iTunes erronously thinks there is no network and doesn't even initiate network activity.
Seems iTunes tries to be smart by detecting "is there network" by asking something in the OS, rather than trying?
Is this a bug? Am I the only one experiencing this? Is this isolated to my particular 3G modem/ISP? I don't think so...
thanks for any enlightenment,
peter

Hi. Just go a bit further by process of elimination which you've already started. Here's a couple more things you can try.
1. Different USB cable?
2. Try plugging into another computer just to see if your iPhone will get recognised then.
If it still deosn't work then I can only assume that the handset itself has developed some kind of fault, in which case, just book a 'Genius' appointment at your local Apple store asap and get it replaced.

"Streaming Buffer Size" pop-up menu does not exist under Advanced when I use iTunes - Preferences - Advanced. How can I increase buffer size?

How can I change buffer size in iTunes 10? "Streaming Buffer Size" pop-up menu does not exist under Preferences--Advanced.

Hi all, iTunes streaming victims.
I struggled long with the streaming buffer problem of iTunes and indeed could solve it with increasing the buffer size, which features has been removed in iTunes 10. And this without updating the instructions by Apple!
Here is my solutions:
http://www.rogueamoeba.com/airfoil/
perfect for all wireless audio streaming not only for itunes, but any source on the Mac.
solved the problem completely for my 3 MacBooks, 2 airports, iphones etc.
it is not for free but a very good value for money.
cheers, Wil

My husband downloaded a newer version of Firefox on my computer and now it does not automatically go online when opened. How do I remedy this?

I always click "work offline" when I exit anything that I do online. Firefox always opened in the online mode before, but since the newer version was downloaded I now have to manually put it online every time I open it. Even when I click a link in an email.

Found this item it may help
OK, I have fixed it here. Here's what I did:
quit iTunes
trashed ~/Library/Preferences/com.apple.iTunes.plist
started iTunes, and authorised my account
Worked straight away after that !

Printing is unclear and black lettering does not print at all when I use my PC

Similar Messages

Maybe you are looking for