Printing issue after update to 10.6.5 on Hp Printer 2500

Printer shows conncted but no job prints!
solution: reinstall 10.6.3 and it prints again
run Hp printer update and printer stops again?
can anybody help?

Maybe this thread will help?
http://discussions.apple.com/thread.jspa?threadID=2640270&tstart=50

Similar Messages

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

Color (onscreen/print) issues after update to 10.4.9

I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Adobe PDF Printer gone after updating!?

Good afternoon,
My PDF Printer has literally disappeared after running the automatic update (9.4.4) early this morning.
In fact, the sequence has been like this:
1. Running InDesign so I keep on working on a project.
2. Adobe updater pops up
3. Since I was experimenting random and automatic "pauses" on the PDF printer, I decide it is a good idea to update in the hope this will fix the random pauses.
4. Work nice as always. PDF creation goes fine, however, random pauses did not go away. Doesn't care too much, at the end it takes only a split second to "resume" the printer back and you're done.
5. Out to lunch and back
6. Open same InDesign doc to perform corrections as addressed in client email
7. Go to print dialog box and... voila! PDF printer is gone...
So, at this point, I go to the printer Apple pref pane and surprisingly, there is NO PDF Printer at all.
Try to add one maually. Worthless, there is nothing to be added. I restart the iMac.
Once back in, try the same. Nothing to add.
Navigate through forums and the web and nothing seems to address such behavior.
I decide to reinstall Acrobat from scratch using the CD. That is, to downgrade. Back to normality. Annoyed, indeed,
So, Has anyone experienced such a thing? Any known solution?
What about the random "pauses" or standby?
Thanks in advance!!! ;-)
Juan.

Thanks for posting Steve, I still have to deep-read these links you provided but I feel like the answer might be there...
Yesterday, in the meantime, I was in a hurry so I just decide to re-install Acrobat from scratch wich blew away the issue.
Seems like Acrobat 9.0.0 does well with MacOs 10.6.1
As far as I have reade in the links, I understand that there will be no more PDF Printer in the future, am I right?
And, I was just wondering, if it is so, we wont have to use Distiller anymore?
Guess I have to invest sometime on this.
Thanks!

Color issues after update to 10.4.9

Has anyone discovered color printing (images) after the 10.4.9 update? ColorSync was updated as stated here: http://docs.info.apple.com/article.html?artnum=305214.
I personally swear that I have onscreen proofing go bad using Aperture with a particular HP printer (8750). The other printer profiles appear to be ok. I cant prove this, but hope to find other users with the same issue (if it exists).

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

Printing problems after updat maverick

After update to maverick mine hp deskjet 3070a ,cannot print wirelessprinting anymore.the AirPrint is not in the list and, bonjour printing is not in the list *** Well Before i update the printer was working allright with wireless connection. No problem what so ever. I can only choose USB printing. Can you please give me Some advice.

I have the same idential issue with a HP Laser Jet Printer P1100/P1102w... If you tick the netwrok printer sharing box on the USB connection the Bonjoour printers show up then almost immediateky dissapear? Only on a few occasions do they remain stable enough to click on and add, however it fails to support AirPrint and will not print over WiFi... it does not pick AirPrint as the driver on AutoSelect and even if I select the printer driver manually it still will not print over WiFi... USB is fine however. I have reset the printing system, I have done a WiFi card reset, I have done all the troubleshooting I can do but still there is an issue? Is there anything else I can do?
I will be getting HP support to remotely shoaddow my Mac in an attempt to get a successful installation however I suspect the issue will persist? All the Apple Updates are done and also the current drivers are installed. I suspect this is an Apple Bug that needs to be fixed asap? It is a brand new HP printer that is supposed to support AirPrint...Very frustrating Apple?

Various Issues After Update To Bootcamp 3.2 (MacBook Pro, WindowsXP)

Hi all,
i'm experiencing various issues after i updated to Bootcamp 3.2.
I first was running Bootcamp 3.0 (everything worked just fine, except some nv4_disp.dll bluescreens). I updated to Bootcamp 3.1 and then to Bootcamp 3.2.
Everything seemed to be fine firstly, but now i noticed various issues:
1. I can't access the Bootcamp control panel (crashes when i try to open it (applecontrolpanel.exe at Offset 0004703a)
2. Everything USB doesn't seem to work (except external USB drives), like USB printer does not print, camera attached via USB does not import photos)
When i check the Driver-Manager i'm seeing multiple USB hubs, root hubs and host conrollers (4 root hubs, 2 openHCD usb host controller, 2 usb hubs...). When i try to configure the USB port the printer is connected to i also get an error ("not supported").
3. When i try the extended display settings i'm getting an "NVIDIA display panel extension can't be displayed".
MacBook Pro 13inch, Windows XP MediaCenter Edition (SP3), NVIDIA GeForce 9400M.
Thanks: Lars

Answered my own question, but want to post how I did it in case other users have the same problem.
I am assuming this issue appeared because I live in Canada. When I installed the Bootcamp 3.2 update, for some reason it changed my regional language of my system to French (Canada) - Canadian Multilingual (Apple)
To change it back I went in Windows XP to Control Panel, Regional and Language Options. Languages tab. Under Text services and input languages clicked Details.
Under settings tab changed Default Input Language from French (Canada) - Canadian Multilingual (Apple) to English (Canada) - US. Click apply.
Wait...it was working, but in the time it took me to type this it suddenly reverted and Im back to weird character mappings inspite of the language setting being changed.

Cloud print disappears after update

After the update to my Samsung Galaxy Note 3 Google Cloud Print no longer works. Icon is gone. Not listed in the Google folder in all apps. Not appearing in share menu. But it is listed in all apps in the settings area and listed as active in settings/print.
Also Handcent popup allows quick response to incoming texts, but whatever is typed doesn't get sent or even registered in the conversation list.
Both issues need to be fixed.

Hi,
Cloud Print was working perfectly until the latest update of the phone.
I uninstalled - re-installed - rebooted and the problem remains.
Cloud Print's icon is nowhere to be found.
Cloud Print no longer shows up in the Share menu.
BUT - Cloud Print shows in Settings/all applications
AND - Cloud Print shows Settings/Other/Print as being active
ALSO - only one application shows that it is still in the system: OfficeSuitePro. There is a way to access Cloud Print in its print menu, but it's rather complex.
Summary: A well-known app, and by Google, of all things, gets installed on Android but it cannot be used because it is essentially invisible. When did this happen? Right after the phone's operating system update.
Please advise,
Michael

Samsung printer fails after update to CUPS 1.7.5

On July 31 I updated my system and cups-1.7.4-1-x86_64, cups-filters-1.0.54-1-x86_64 and libcups-1.7.4-1-x86_64 got updated to cups-1.7.5-1-x86_64, cups-filters-1.0.55-1-x86_64 and libcups-1.7.5-1-x86_64, respectively. I just tried to print something, but instead of the page that should be printed, my printer, a Samsung ML-2165, printed:
INTERNAL ERROR - Incomplete Session by time out
POSITION: 0x9eee (40686)
SYSTEM: h6fw_5.53/os_hook
LINE: 1353
VERSION: SPL 5.53 07-22-2011
I'm using the Samsung ML-2160 printer driver, which worked flawlessly until recently (note that in the beginning I had problems printing more than 1 job without resetting the printer, as stated in the comments, but this issue magically went away).
I decided to set LogLevel to 'debug' and now my /var/log/cups/error_log reads:
D [04/Aug/2014:17:56:20 +0200] [Job 73] The following messages were recorded from 17:44:25 to 17:56:20
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Job restarted by user.
D [04/Aug/2014:17:56:20 +0200] [Job 73] time-at-processing=1407167771
D [04/Aug/2014:17:56:20 +0200] [Job 73] 3 filters for job:
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [04/Aug/2014:17:56:20 +0200] [Job 73] rastertosamsungspl (application/vnd.cups-postscript to printer/Samsung_ML-2160_Series, cost 0)
D [04/Aug/2014:17:56:20 +0200] [Job 73] job-sheets=none,none
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[0]="Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[1]="73"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[2]="****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[3]="****straat 4 - Google Maps"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[4]="1"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[5]="EdgeControl=Fine number-up=1 JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[6]="/var/spool/cups/d00073-001"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[7]="CUPS_STATEDIR=/run/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[8]="HOME=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[10]="SERVER_ADMIN=root@dc7800"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[11]="SOFTWARE=CUPS/1.7.5"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[13]="USER=root"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[14]="CUPS_MAX_MESSAGE=2047"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[17]="IPP_PORT=631"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[18]="CHARSET=utf-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[19]="LANG=en_US.UTF-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2160_Series.ppd"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[21]="RIP_MAX_CACHE=128m"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[22]="CONTENT_TYPE=application/pdf"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[23]="DEVICE_URI=usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[24]="PRINTER_INFO=Samsung ML-2160 Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[25]="PRINTER_LOCATION="
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[26]="PRINTER=Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[27]="PRINTER_STATE_REASONS=none"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[28]="CUPS_FILETYPE=document"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[30]="AUTH_I****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftopdf (PID 4266)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftops (PID 4267)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/rastertosamsungspl (PID 4268)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started backend /usr/lib/cups/backend/usb (PID 4269)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Restarted by "root".
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops - copying to temp print file "/var/spool/cups/tmp/010ab53e725fc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading USB quirks from "/usr/share/cups/usb".
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loaded 68 quirks.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printing on printer with URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] libusb_get_device_list=11
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: +connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: -connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer found with device ID: MFG:Samsung;CMD:SPL,FWV,PIC,EXT;MDL:ML-2160 Series;CLS:PRINTER;MODE:SPL5,R0STATUS:BUSY; Device URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] Device protocol: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sending data to printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer make and model: Samsung LaserPrinter
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for pstops: pstops 73 mk '****straat 4 - Google Maps' 1 'EdgeControl=Fine JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771'
D [04/Aug/2014:17:56:20 +0200] [Job 73] Using image rendering resolution 600 dpi
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/010ab53e725fc
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter gs (PID 4275)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter pstops (PID 4276)
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4266 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Page = 595x842; 12,12 to 582,830
D [04/Aug/2014:17:56:20 +0200] [Job 73] slow_collate=0, slow_duplex=0, slow_order=0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_comments - %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%BoundingBox: 0 0 596 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%HiResBoundingBox: 0 0 596.00 842.00
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Creator: GPL Ghostscript 914 (ps2write)
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%LanguageLevel: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%CreationDate: D:20140804175611+02'00'
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Pages: 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%EndComments
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_prolog - %%BeginProlog
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_setup - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before page loop - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Copying page 1...
D [04/Aug/2014:17:56:20 +0200] [Job 73] pagew = 570.0, pagel = 817.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageLeft = 12.5, PageRight = 582.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageTop = 829.5, PageBottom = 12.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageWidth = 595.0, PageLength = 842.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1 pages...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4276 (pstops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4275 (gs) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4267 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Samsung_ML-2160_Series: spl2.c:1322: RenderGDI: Assertion `ul_comp_size < ul_band_size' failed.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sent 44411 bytes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4268 (/usr/lib/cups/filter/rastertosamsungspl) crashed on signal 6.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Hint: Try setting the LogLevel to "debug" to find out more.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Waiting for read thread to exit...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read thread still active, aborting the pending read...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Resetting printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4269 (/usr/lib/cups/backend/usb) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] End of messages
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state=3(idle)
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-message="Filter failed"
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-reasons=none
(I wiped out some confidential information)
Notice the failure of the RenderCGI assertion, likely causing the crash of rastertosamsungspl. I searched on the net, but didn't find a solution. However, I remembered that the CUPS packages were updated a few days ago and I manually downgraded to the previous releases. This solved the problem for now.
Can someone see what's changed in the last release, especially regarding communication with a printer driver?

Some older servers don't know what to do with unknown extensions. They are supposed to ignore them, but some actually close the connections with an error. By encapsulating, you are essentially stripping off any extensions because there is no such thing in the SSLv2 format. Suggest upgrading server if possible.

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Printing issue after update to 10.6.5 on Hp Printer 2500

Similar Messages

Maybe you are looking for