Printing issues after export

The newsletter we publish, would not print the third page in the PDF version we published. I exported as an interactive PDF, and once I exported as a PDF for print it resolved the issue. My problem is that I'm not sure why it would print the first two pages and not the last (if it was an export problem), and also since we do utilize many interactive features these get lost if exported for print. The users mostly access our newsletter via email and web, however many print to use as references. So I need to find a happy medium to satisfy both uses. Any advice?

katiefinn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Color (onscreen/print) issues after update to 10.4.9

I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Audio issues after exporting

I've made a 40 minute video of my friends' wedding, which plays beautifully in iMovie, but when I export it, there are some audio issues. I've read other forums and detached all audio before exporting and still the same result.
1) Part of the opening sequence has a piece of audio (from another part of the video) that runs with some slow motion clips of bride and groom. When I export, the warped, slowed down original audio can be heard in the background. I've tried everything - detach audio and delete the offending piece of original audio to reducing the volume level of the original audio to 0. It's still there after exporting!!!
2) Maybe as a result of the above, not sure, but once exported, the whole video audio is out of sync by a few seconds. Went back and checked the project and it's all good with all the audio lining up with the clips, but export and it's out of whack
My friends are hounding me to see the video and I keep stalling, quoting some 'technical issues'.
Please help!

Just wanted to let you all know you've saved my sanity by posting on this board. Your solution - while not what I would have guessed in a million years was the problem source - fixed my video. I can't believe it was so simple! Now, if I could only get the hour(s) back where I tried to find the audio track I 'hadn't muted'...

Report printing issue after upgrading from LV 8.2 to LV 2009

Hello,
I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
I do not get any error whatsoever, and I cannot figure out where the solution may be.
I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
Thanks.

Brandon,
Thanks for your input.
Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
Everything runs with no errors. I would prefer to see a bunch of errors ...

"No Error" exception when printing report after Export

Hello,
When calling a PrintToPrinter function after an Export of the same instance, the exception with the message "No Error" comes up.
This happens only for certain reports.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at FidelioCrystalNET.CrystalNET.Print() in CrystalNETLib.cs:line 127
Source      - "rptcontrollers.dll"
Same error also comes when calling either Refresh or VerifyDatabase methods.
Crystal Reports 2008 Runtime SP2 is installed. Reports using Oracle DB connection.
.NET code uses Framework 2.0
Anybody knows how to fix it?
Thanks
Edited by: Vitaly Gamarnik on Oct 26, 2009 1:07 PM

Hi Ludek,
I am able to reproduce the problem in a simple test code pure .NET (C#) application.
Here is the code:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace CrystalLibTest
    public partial class Form1 : Form
        private ReportDocument crpe;
        private ConnectionInfo connectionInfo;
        public Form1()
            InitializeComponent();
            ReportTest();
        public void Init(string service, string user, string password)
            connectionInfo = new ConnectionInfo();
            connectionInfo.ServerName = service;
            connectionInfo.DatabaseName = service;
            connectionInfo.UserID = user;
            connectionInfo.Password = password;
        private void SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument)
            Tables tables = reportDocument.Database.Tables;
            foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
                TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                tableLogonInfo.ConnectionInfo = connectionInfo;
                table.ApplyLogOnInfo(tableLogonInfo);
        private void SetDBLogonForSubreports(ConnectionInfo connectionInfo, ReportDocument reportDocument)
            Sections sections = reportDocument.ReportDefinition.Sections;
            foreach (Section section in sections)
                ReportObjects reportObjects = section.ReportObjects;
                foreach (ReportObject reportObject in reportObjects)
                    if (reportObject.Kind == ReportObjectKind.SubreportObject)
                        SubreportObject subreportObject = (SubreportObject)reportObject;
                        ReportDocument subReportDocument = subreportObject.OpenSubreport(subreportObject.SubreportName);
                        SetDBLogonForReport(connectionInfo, subReportDocument);
        private void AddCurrentValue(ParameterField field, object parameterValue)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = parameterValue;;
            field.CurrentValues.Add(parameterDiscreteValue);
        private void setParameter(string parameterName, Object parameterValue)
            ParameterField field = crpe.ParameterFields[parameterName];
            if (field != null)
                AddCurrentValue(field, parameterValue);
        private void ReportTest()
            crpe = new ReportDocument();
            Init("SERVICE", "USERNAME", "PASSWORD");
            crpe.Load("c:\\temp\\report.rpt");
            SetDBLogonForReport(connectionInfo, crpe);
            SetDBLogonForSubreports(connectionInfo, crpe);
            setParameter("SP-PARAM1", "param_value1");
            setParameter("SP-PARAM2", 1111);
           /* about 20 different parameters are here */
            crpe.ExportToDisk(ExportFormatType.RichText, "c:\\temp\\export.rtf");
            setParameter("SP-PARAM1", "param_value1");
            setParameter("SP-PARAM2", 1111);
           /* about 20 different parameters are here */
            try
                crpe.PrintToPrinter(1, true, 1, 65535);
            catch (Exception e)
                MessageBox.Show(e.Message);
               /*here the error comes up*/
I also found that for some different reports, the error comes even when executing first time.
Vitaly

Interlacing Issues after Exporting - Help!

Hello -
So I'm having some very frustrating issues exporting a project from Premiere CS3. I'm trying to output to a lightweight quicktime format - either mp4 or an h264 .mov file. I've shot footage using a canon legria hf s10 camcorder, importing at 1920 x 1080 at 25 fps. I used apple's new iMovie to import the clips to my computer (because premiere doesn't seem to natively support AVCHD, which I think the camera shoots in). So I capture the footage with iMovie, then import those .mov files using premiere.
All this is fine, until there's a lot of horizontal motion in shots, where I get these ugly interlaced lines that really mar the quality of my footage. I'm trying to produce some videos in a professional setting, and these lines really hurt the overall perceived quality of my work. However, I thought I had found a fix when I selected the problematic clips and right-clicked, selected "field options," and clicked "always deinterlace." After doing so, the ugly lines disappeared, and when I play the clips back in premiere, I have no issues whatsoever. However, when I EXPORT the clips, the ugly interlacing somehow RETURNS... which is exceedingly frustrating, because I can't figure out how to get rid of them.
When I export, as said before, I am trying to create a relatively low-quality, 854 x 480, square pixel quicktime file of some sort. I've tried any number of exporting options to no avail.
Therefore, I am at your mercy. Endless gratitude to anyone who can help solve this plight. Here's a still example of the problem for your consideration:
http://drop.io/76jjrs8#
Thanks so much,
Jim

Hi, Ann,
You should try Dans Isaac HD to SD Workflow. There is plenty of answers for your question.
Art

Printing Issues After Upgrading to Win 8.1

Can someone direct me or help me out please. I upgraded to Windows 8.1 on Saturday from Windows 8. I have a Lexmark 7600 Series that used to print, now it doesnt. I have tried everything that I can think of which includes removing and re-installing the printer,making sure the software/drivers is updated. I keep getting the following message every time I do a test page ..
communication not available:
ensure printer is powered on, disconnect and reconnect the printer power cable, USB cable(which is how I print), check firewall, ensure the convenience port is not in use and restart the computer.
I have tried all of the above. I research Wins 8.1 compatibilty with this printer and nothing is listed whether it is or not. I never had this issue but I have notice on the website that alot of people are having issues with this Windows 8.1 upgrade and printers.
I appreciate any feedback, help, links, anything that can help me fix this probblem before buying another printer which is not necessary since I know it prints on other computers in my house.
Thanks
Maribel

Hey @Maribel09 ,
Welcome to the HP Forums!
I understand you're having issues with your Lexmark 7600 printer after upgrading to Windows 8.1.
You may need a driver update for the newer version of Windows. I would suggest contacting Lexmark support as they would be the most qualified people to help you with this problem. You can contact Lexmark support here: Lexmark - Contact Us.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HP Envy printer issues after loading Mountain Lion

Hi Since loading Mountain Lion on Macbook Air Command P on a web page prints only part of that page? For example in printing a bank statement, the description but not the amounts printed and many of the headings did not print.

Thank you to all but after rebooting, problem seems to have disappeared.

Layout Issue after exporting crystal report XI in pdf format

Hi All,
I have developed a crystal report in XI version. I have set my page layout properties in the report to be in landscape orientation and A2 size sheet with No Printer(optimize for screen display) option unchecked. The problem is when I export the report in pdf and open the report in pdf for printing, it takes the printer preference settings that are set to portrait and letter format. If I change my printer prefence settings to landscape, it works fine. But, I do not want to change my printer preference settings and want that the settings that I am giving in crystal report designer must be taken for printing purposes in pdf.
I hope, I was able to put forward the question correctly without any confusion.
Can someone please help me out to find a solution ?
Thanks in advance.

Hi Akshay
Always quote the actual version of Crystal Reports you are working with. E.g.; CR IX is not quite enough and the best place to find the actual version is in the Help | About screen of the CR designer.
By CR XI, you could mean CR 11.0.x, or CR 11.5.x. If you are using CR 11.0.x, update to CR 11.5 (also referred to as CR XI R2). See this blog on how to.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Excel output display issue after exporting the report

Hi All.
We are using BI Publisher with Oracle retail for report generation.While exporting report in excel format , after saving the file we are not able to see the data.
When we do a Format-->Autoformat and select one of the options, we can see the data .
What could be the possible reason for this?Can i do anything to avoid this.
Is there a possibility of checking excel log to see how the Excel treating the incoming data.If yes, how can we check the excel log(failed to find anything on this).
Thanks!!

Hmm.. Not really sure. Have you checked your Financial Reporting preferences on Workspace? Couple of things to look for:
- Export to Office Application options
- User Point of View options
I would just check the preferences and test various options.
Cheers,
Mehmet

Acrobat Reader 8.1.2 network print issue after installing XP SP3

I administer a network of 30+ workstations, and since installing Acrobat 8.1.2 and Windows XP Service Pack 3, I've been experiencing odd behavior from the print function in the reader.
Staff can open a pdf document with no issues, but when they try to print to a network printer, nothing happens. I then in turn open wordpad on their workstation, do a "File, Print", and the print functions properly.
I then can go back to the reader, and the print job will work.
Nothing has changed on my network in regards to previous settings, with the exception of installing reader 8.1.2, and XP SP3.
Any ideas, or potential solutions?

You are not alone. I hope you get some response. We have seen nor heard anything.
See: http://www.adobeforums.com/webx/?13@@.59b56569/6
Title: Adobe Reader v8.1.2 Compatible with Windows XP Pro SP3
One ray of hope is that it seems to be getting quicker. I don't know why but I'll take it!
When I go to this Windows XP link,
http://www.microsoft.com/windows/products/windowsxp/default.mspx
it says I am running SP2 instead of saying I am running SP3, which is what my System Properties says is installed. Just something to think about and perhaps check.
Good luck!

Print issue after Yosemite upgrade

Mac Book Pro 15-inch
2.5GHz quad-core Intel Core i7
Turbo Boost up to 3.7GHz
16GB 1600MHz memory
512GB PCIe-based flash storage 1
Intel Iris Pro Graphics
NVIDIA GeForce GT 750M with 2GB GDDR5 memory
I am not able to Print after upgrade to Yosemite. I have Kodak ESP 5200 printer and can print test page fine from the Kodak home centre software but when I try from any other app e.g. safari word excel it submits the page to print queue and the printer feeds new page in but then just stops and the print queue shows error?
I have talked to Apple support and tried a number of things reset the print queue deleted the printer still no luck.
Since the support call I have also installed the printer software and then re installed latest version from Kodak website.

That is inconvenient but at the same time I wouldn't bash apple, it is the company of the printer that is responsible for updating drivers. If you can find a driver for another kodak printer that is newer I would try downloading it. Then when you select a diver select the one that is not actually for your printer. Make sense? This might work because the only reason you need a driver for your exact printer most of the time is to use certain features unique to that printer. Maybe that might work.
-crazy

HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

Hi Riley.
You can get HP Photo Creations here:
www.hp.com/go/hppc
It's a free download for Mac and Windows.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Print problem after exporting Pages to PDF.

I am attempting to print a very large genealogical book (300 + pages) of my family's descendants and noticed that in both Preview and Adobe Reader the first character of every page is missing. This does not happen when printing from Pages so it cannot be a printer problem. I checked the placement of the print against the Pages page and both Preview and Adobe Reader are EXACTLY the one character difference with the pages exactly even with each other. The original page type is 12 pt with margins: Left .5in, Right .5in, Top .75in, Bottom .75in, no header, Footer .5in using 9 pt type. What is really odd is that the onscreen display is correct but only the printed (HP OJ6500E702n wireless duplex marginless printer) copy is incorrect which indicates to me the conversion is somehow creating this problem.
I need this PDF file as it is the file I print from plus I put the file on a disk as a backup for the paper book for all book recipients.
Sparkgapper

While this problem is for ANY application that EXPORTS, not prints, to a PDF format, I have discovered that the problem is probably be with the printer's minimum allowable margins being physically the same regardless of portrait or landscape instead of the logical rotation of margin type locations in landscape mode. Question answered by logic research.
Sparkgapper

Printing issues after export

Similar Messages

Maybe you are looking for