Printing Issues After Upgrading to Win 8.1

Can someone direct me or help me out please. I upgraded to Windows 8.1 on Saturday from Windows 8. I have a Lexmark 7600 Series that used to print, now it doesnt. I have tried everything that I can think of which includes removing and re-installing the printer,making sure the software/drivers is updated. I keep getting the following message every time I do a test page ..
communication not available:
ensure printer is powered on, disconnect and reconnect the printer power cable, USB cable(which is how I print), check firewall, ensure the convenience port is not in use and restart the computer.
I have tried all of the above. I research Wins 8.1 compatibilty with this printer and nothing is listed whether it is or not. I never had this issue but I have notice on the website that alot of people are having issues with this Windows 8.1 upgrade and printers.
I appreciate any feedback, help, links, anything that can help me fix this probblem before buying another printer which is not necessary since I know it prints on other computers in my house.
Thanks
Maribel

Hey @Maribel09 ,
Welcome to the HP Forums!
I understand you're having issues with your Lexmark 7600 printer after upgrading to Windows 8.1.
You may need a driver update for the newer version of Windows. I would suggest contacting Lexmark support as they would be the most qualified people to help you with this problem. You can contact Lexmark support here: Lexmark - Contact Us.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

Printing issue after upgrade from 11.5.10.2 to 12.1.3

Hi
I am trying to print the seed reports after upgrade. Text format reports are printing well, the problem is with the XML and RTF format reports, not yet tested the PDF format.
Thanks
Reddy

Hi Hussein,
Application release : 12.1.3
Database Version : 11.2.0.2
OS Version : RHEL 5.5
The problem with the seeded reports only, not yet started testing the custom reports, for the XML/RTF its printing, but the output has lot of junk. If I view the output in the Concurrent request, it looks nice. When I view the file from $APPLCSF/$APPLOUT it has lots of junk, the same way it is printing.
Thanks
Reddy

Report printing issue after upgrading from LV 8.2 to LV 2009

Hello,
I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
I do not get any error whatsoever, and I cannot figure out where the solution may be.
I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
Thanks.

Brandon,
Thanks for your input.
Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
Everything runs with no errors. I would prefer to see a bunch of errors ...

HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

Hi Riley.
You can get HP Photo Creations here:
www.hp.com/go/hppc
It's a free download for Mac and Windows.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

HT1338 Do I have to reinstall my print drivers after upgrading to 10.8? I seem to have lost both my printers and my ability to download from my camera. Never had problems with 10.7. I'm a little scared.

Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

Satellite L75D-A7283
It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
-Jerry

Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Autoconfig issue after upgrading 12.1.1 to 12.1.3

Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.

Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher

Printing Issues After Upgrading to Win 8.1

Similar Messages

Maybe you are looking for