Printing issues coming on Sapscript

Hi Friends,
In SAPSCRIPT, I am facing a issue.  Actually, I have done some changes in SAP SCRIPT, and I have copied same script in my testing client. All changes are desplaying here, but when I tested it using MB90, the old data is desplaying here. I have already checked it inside the NACE  output type... there also same scipt name is define.  I don't understand, why this type of problem is comming . Pl suggest me.
Waiting for your <removed by moderator> respond .
Thanks & Regards,
Swapnika
Edited by: Thomas Zloch on Sep 27, 2011 2:04 PM

Hi,
  please check in open_form and start_form function module your passing correct form or not?
check the form is active or not?
activate the form once again transport to test client and check? 
Please refer the link : Sap script changes - dev to quality ?
Regards,
Dhina..

Similar Messages

  • Address printing issue in SAPSCRIPT

    Hi All,
    I am getting address printing issue in address in sapscript .
    Here is my address format in the script.
    /: ADDRESS DELIVERY PARAGRAPH ZA LINES 10
    /:    TITLE                &KNA1-ANRED&
    /:    NAME               &KNA1-NAME1&,  &KNA1-NAME2&,  &KNA1-NAME3&,  &KNA1-NAME4&
    /:    STREET            &ADRC-STREET&
    /:   LOCATION        &ADRC-STR_SUPPL1
    /:   POBOX             &KNA1-PFACH&  CODE  &KNA1-PSTL2&
    /:   POSTCODE       &KNA1-PSTLZ&
    /:  REGION              &KNA1-REGIO&
    /:  CITY                   &KNA1-ORT01&,  KNA1-ORT02&
    /:  COUNTRY          &KNA1-LAND1&
    /:  FROMCOUNTRY &T001-LAND1&
    /: ENDADDRESS
    Here in the above code I had added LOCATION and modified the STREET field value.
    Moved the changes to QAS server along with the driver program., confirmed all the related transports are moved.
    While testing in QAS , i noticed that after LOCATION print I am getting blank space and then the remaining fields are printed.
    For example:
         casa velas boutique hotel
         Attn:  Marie John
         AV.  cocoterosss
        63550 Nuevo Vallarta, Nayarit,
        MEXICO.
    In the above example the third line the LOCATION data.
    The surprise here is that I am not getting blank space in DEV , I had checked all the transports, and all are ok.
    Please advice me where I am wrong, ie why i am getting blank space in QAS whereas it not showing in DEV.
    Thanks in advance.
    Vengal Rao.

    Hi Jay,
    I fully agree with you that the address printed will be as per SAP standards.
    Currently I am looking into the country configuration in DEV - I hope may be the reason,
    I have to use the existing ADDRESS....ENDADDRESS format as our client is using  4.6 version,  he just print the financial reports using the common script.
    So anything away from the orginal one may lead to more trouble in other reports.
    Once I get a reason behind the issue, I shall definetly post them.
    Thanks,
    Vengal Rao.

  • Reg: Continuous Printing issue in EPSON LQ-300+II

    Dear All,
    I'm facing a continuous cheque printing issue with EPSON printer (LQ-300+II).
    We've created a new page format for state bank of Mysore cheque (Dimension 231mm width X 92.5mm Height) and assigned that in our sapscript for printing. The cheque is printed using transactoin F-58.
    In windows server properties (print setting), our system admin has created a form with above dimension.
    My problem, first & second cheques are printed correctly & identically, but from third cheque the amount is printed slowly starting to print up by 0.5mm. After few cheques it is completing coming out of the box and printing few cms up.
    We've tried implementing every possible solutions given in the forum and ended in vain.
    1) inserted coding in printer initialization.
    2) tried to create similiar page format in windows.
    Please sugget a way to get out of this continuous printing issue.
    Thanks,
    Rajan U

    The stated length of the form / paper is in error...  that's why the output is "moving" up the page... sound like it should have been 93.0 mm height.  I would guess that if you carefully measured the placement on check 1 and 2, you would see precisely how much too short the height is....

  • Printing issue

    I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged.     The screen indicates "Print cartridge problem  (Black) Refer to device documntatnion to troubleshoot"   I took out the cartridge, shook it, put it back in - no luck - help! Thanks

    Hi @LYNNHAAG , and welcome to the HP Forums!
    I see you're experiencing print issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

    hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
    printer  installed but print not coming ...
    please give me solutions of this problem

    go to http://www.hp.com/go/tools may help resolve the issue.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work on behalf of HP.

  • SAP SCRIPT Barcode Printing Issues

    Hi ,
    I'm printing 3of9 , barcode in sap script, which has width of 1CM and height of 1CM, the problem is once it's printed, barcode is being printed at higher position than it's supposed to be and creating alignment issues and also introduces blank lines in between .
    Has any opne faced this problem , and how to over come this.
    Regards,
    Raghavendra

    With SAPscript, barcodes are produced only by each printer (according to BarSimm or whatever technology you use). The preview is just an approximation made by SAP. So, you must trust your printer and adapt your SAPscript until it prints correctly.

  • Lightroom print issues with Espon Stylus Pro 4900

    I'm having a weird issue with my StylusPro 4900 + Mavericks/Lightroom
    My prints keep coming out 1/3rd their normal size.
    I spent the day troubleshooting and no luck
    Using LR4 ad now CC LR + Installed all the updates.
    Uninstalled old the old drivers and reinstalled new.
    Restarted several times.
    Cleaned up the OSX stuff and more .
    I have been using Epson's for over 10 years but have never run into an issue like this.
    I'd appreciate any ideas or help!

    Not hearing back about the details of your "success" with the Epson driver install, I can only assume that it really does not work correctly - as is the case with everyone else I've read about trying to use the 2200 under Snow Leopard.
    The only work arounds are two, and neither is satisfactory:
    1. You can turn off Color management in the first photoshop print dialog and then select the color managed option in the second - this defaults to the printer's drivers instead of using those in photoshop. The result is not right - the colors and brightness are noticeably off - but it is "less unbearably horrible" than what you get if you try to print with the correct workflow: Photoshop manages colors in the first dialog and No color management selected in the second.
    2. There is a Gutenberg driver for the 2200 that theoretically could let you print without the Epson printer drivers. However, I have yet to encounter anyone who has gotten this to work properly so that it duplicates the color results formerly achieved with the Epson driver and photoshop managing colors under the earlier versions of the OS.
    This is not a good thing. Many of us who rely on the Epson 2200 are not suddenly and without warning and with no word whatsoever from Epson... just plain SOL...
    Epson should at least say something about this. Their statement could be "we will not support this printer under Snow Leopard" (terrible policy, but at least we could all go out and shop for new HP color printers...), "we are updating drivers for this (these?) printer(s) and will have them available shortly," or even "we are looking into this problem and will respond shortly."
    Right now the silence is deafening. There isn't anything at the Epson site addressing this issue at all, and there is no way to follow up on it from the page addressing Snow Leopard compatibility.
    Poor show, Epson.

  • Printing Issue --- what might be the problem not able to identify

    Dear guru,
    Here i have encountered an issue in smartform printing.
    before coming to main issue let me give a brief details regarding this .
    I have developed a smartform into development server and transported it into production server.
    In development server when i am executing this smartform its is giving the exact output printing and printpreview of that smartform what i assigned font type for it(courier new).
    (in development server i am getting courier new font  in printpreview,,, and using "print" option that courier new font is coming into output page--- no problem here)
    But In production server when i am executing this smartform its is giving the exact printpreview of that smartform what i assigned font type for it(courier new) but when it is getting printed...... courier new font is getting changed into other font . not able to get output in courier new format.
    (In production server i am getting a spool num for that smart form ,,,, when i am converting this  spool number into pdf using rstxpdft4 of that smartform  it is coming properly into courier new format.)
    so guru what might be the problem ??
    is it problem reted printer setting ??

    Hi,
    Check for the printer in production system.
    Also retransport the smartform with the smartstyle if created by you.
    Regards,
    Ram

  • Printing issue from Indesign CS 5.5

    Hello,
    I have several users using Indesgn CS5.5 on Windows XP machines.  They are all printing to the same printer and the printer has the same name (mapped locally to the machines).  Once someone opens the Indesign file and edits the file, the others are no longer able to print the file.  They go in and print it and it claims that it was sent, but the printer never shows any activity of the print job coming in.

    This sounds more like some type of network issue than an InDesing problem...

  • Printing Issues with HP OfficeJet 100 and Windows 8.1

    We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

    Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
    I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
    I would like to make some suggestions that may help. Let me know how it goes!
    1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
    Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
    Try to install
    2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
    How to disable realtime scans
    Try the install
    3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
    Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
    Try the install
    Enjoy your Monday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP ENVY 100 D410 Printing issues...

    I have an HP ENVY 100 that has recently started having printing issues.  We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed.  The problem seems to be somewhat random and the results are always the same.  When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer.  Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found.  To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem.  Has anyone had a similar problem?

    Hi Talon,
    That more liekly related to the software indeed, I would suggest trying the following steps:
    Reset the printing system as listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
    Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
    If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
    Now try printing and follow for any difference.
    If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
    If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
    Download and isntall the latest Lion Software below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
    Once completing the installation click the Apple icon and install any available Software Update.
    Shlomi

  • New airport extreme and printer issues

    OK here is the deal
    I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

    There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
    Sorry to be so vague, just thought it might be a start for you.

  • Need help diagnosing cause of printing issue w/ image distortion

    Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
    I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
    The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
    Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
    Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
    - Ian

    Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
    I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
    The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
    Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
    Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
    - Ian

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Remote Desktop Connection and printing issues

    Hi, 
    I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
    in Windows Server with my local printer in my room connected to desktop, it won't work.
    Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain. 
    I also noticed there is about 30 seconds wait to process any document to print.
    Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
    My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing. 
    I also wonder why printer spooler needs to be restarted when printer is not working.
    Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
    Thanks
    Regards,
    Clement

    Hi,
    Please check if you turn on this settings:
    You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
    1. Open Remote Desktop Connection by clicking the Start button, clicking
    All Programs, clicking Accessories, and then clicking
    Remote Desktop Connection.
    2.Click Options, and then click the Local Resources
    tab.
    3.Under Local devices and resources, select the Printers check box.
    4.Click Connect to start the session.
    Make sure that you select your printer in the Print dialog box each time you print.
    Karen Hu
    TechNet Community Support

Maybe you are looking for