Printing Issues: Keynote only prints first two pages of presentation
I am trying to pring an 11 page Keynote presentation on an HP 4600 color laser printer. It will only print the first 2 pages.
If I convert the presentation to PowerPoint, it prints all ages correctly. If I print a word or pages document, all pages print correctly.
What gives with keynote?
MacBook Pro, 2.1 GHz Mac OS X (10.4.9) 2 GB Ram
It is likely that there is something funky with one of the images on the page. The next step would be to delete the images one at a time to see which one it is. Once you have isolated it, you could try saving it in a different format (e.g., TIFF, or JPEG, or PNG), and see if that solves the problem.
Similar Messages
-
Four pages of apps in iTunes, but only first two pages visible on iPhone!
If I connect my iPhone 4 to my notebook and launch iTunes, I can see four pages of apps on my phone - two pages, then a blank page, then a further two pages.
However, looking at the phone itself, only the first two pages are visible (and only two little dots at the bottom of the home page).
I can shuffle the apps around in iTunes without any difficulty, but when I press 'apply' the sync ends with everything back as it was in the first place.
iOS and iTunes both up-to-date, rebooting and soft reset doesn't fix.
Hope someone can help!
ThanksWe are having the same problem. Any updates?
-
Print in PDF only Prints the first two pages
I am have been ahving problems with my creat PDF account, only printing the first two pages, when i print something to PDF from a webpage. I.E. Pinterest. It will only print the first two pages and the rest will be blank or incomplete. I am at the end of my rope and dont know how to fix it. I recently got Acrobat 9 standard thinking this may help, but the problem still exists, which irritates me more. Please help!
Try here: http://forums.adobe.com/community/createpdf
There people who use CreatePDF on a daily basis there, who know much more about it . -
Junk Characters on first two pages of Cheque Printing SAP Script.
Hi All
I implementing cheque printing for one of our client's Oman based subsidiary. I have copied the standard SAP Script F110_PRENUM_CHCK into a Z-Form and maintained its original language as EN. I have commented out all the unnecessary peices of information in all the windows and customised as per my requirement.
Now the problem that i am facing is that when i execute this script through the standard driver program RFFOUS_C, i am getting junk characters on first two pages of the script. The info displayed comes in the HEADER and MAIN Windows. The desired output is coming in the 3rd, 4th and 5th pages.
Please let me know how should i get rid of these junk characters.
Regards
Harsh
PS: All info printed is in English only.Hi
Thanks for your response.
Yes, the remittance advice header info is getting printed in the HEADER Window and its contents in the tabular structure are in the MAIN Window.
I am passing EN as the language.
Adding to this, the report RFFOUS_C gets executed and i am checking the spool that is created which has the junk characters on the first two pages.
Regards
Harsh -
Remove First Two Pages of Print from ALV
Dear All,
I am trying to give a print of standard ALV report <b>BCALV_GRID_VERIFY</b>. When I give a print of the Output ALV Grid using the Icon on the ALV toolbar. I get two more pages with Print Parameters and the total count.
Could someone tell me how to remove the first two pages before I get the actual print. Everytime I give a Print I get these two pages so it budget issue wasting everytime two pages for a single page print even.
Thanks & Regards,
JJ.Hi Joseph,
in my case these are the settings...
Just change your spool settings also ..
in my case
SAP Cover Page System Administrator: Default Settings
OS Covert Sheet System Administrator: Default Settings
ALV statastics NO
i think for your case ALV statastics is markes as YES is it true.
Can you change the settings.
Regards
Vijay -
How can I print from MAC with Acrobat Reader. I can't seem to get it to print correctly , first two pages of letter size works ok after the remaining pages get moved up and the printing is cut off.
I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.
-
C309a (Duplex Printing): the first two pages don't "duplex"
Hi, I've got a little annoyance here: I love the duplex printing feature, but the first two pages don't "duplex!" The first page prints fine but doesn't get retracted back inside, and then the second page prints upside-down on a new sheet of paper. The rest of the document "duplexes" as expected. Is there some option I'm (not) enabling?
I'm running Windows XP SP3, wireless printing. Also for what it's worth, everything I've duplex-printed have been PDF files.
Hopefully there's a solution and I don't have to continue leaving the first two pages of my documents blank
Thanks in advance!If you have blank pages in your file you must set the print dialog through print booklet to print blank pages.
-
When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?
Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.
-
When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works. -
Only the first two episodes showing
When I do a search on my podcast in the iTunes Store, the show comes up fine but only the first two episodes are listed. When I click on the show image and go to the show page only those two show up, all four of the episodes are displayed in the other locations that follow the feed.
Does anyone know why this would happen?Actually its really strange, the two missing episodes have been up for a while ( the most recent as of 3 days ago, the older about 12 days) and they never showed up. On a whim I decided to try to resubmit my feed address thinking that maybe I had giving it the wrong one by accident and was given the response that the feed was already taken. When I canceled out of it the new episodes showed up in iTunes. I don't know how but this seems to have prompted the system to recheck my feed and recognize that there were new items available.
Anyone know why this might be the case? Also, when I view it from the search panel only the first two episodes appear, when you open it by clicking on the image of out logo it shows all four. Any ideas on that? The podcast is called 3 Wise Woodies if you want to see what I mean about how it displays the episodes.
Thanks for you help. -
downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window
used ff19
with
Download Statusbar v0.9.10 by Devon Jensen
UnMHT v6.2.0 by http://www.unmht.org
DownloadHelper v4.9.14
had to revert to ff18.0.2Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
Did you try to disable other extensions?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.
Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!!
-
my epson printer only prints the part of email that shows on my screen before scrolling down. i have checked with epson tech and it is not a printer problem. can you help?
Problems like that with Firefox printing look like they are fixed in Firefox 4.
-
Printing from Windows = only the first half of documents print
I'm trying to set up a home print server, to allow access to an HP LaserJet 1005. It's working OK locally and accessed when printing from another Linux box. From XP and Vista, however, the first half of multiple-page documents print, and one-page ones don't print at all. This seems to be the case when using any Windows postscript driver (such as Apple LaserWriter 16/600 PS and HP LaserJet III Postscript Cartridge), and with documents from any program.
I can't see anything obvious in the logs when set to debug, as far as I understand them, they appear to show all pages printing, including the one-page documents which disappear completely. Whether this show it to be a Cups problem rather than a Windows one, I'd rather not attempt to say! This is /var/log/cups/error_log when printing a five-page document, in case there's something useful in it which I have missed.
/etc/cups/cupsd.conf:
LogLevel debug
SystemGroup sys root lp
# Allow remote access
Port 631
Listen /var/run/cups/cups.sock
# Enable printer sharing and shared printers.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseRemoteProtocols CUPS
BrowseAddress @LOCAL
BrowseLocalProtocols CUPS dnssd
DefaultAuthType Basic
DefaultEncryption Never
<Location />
# Allow shared printing and remote administration...
Order allow,deny
Allow all
Allow From all
</Location>
<Location /admin>
# Allow remote administration...
Order allow,deny
Allow all
Allow From localhost
Allow From 192.168.1.33
Allow From 192.168.1.34
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
# Allow remote access to the configuration files...
Order allow,deny
Allow all
Allow From localhost
Allow From 192.168.1.33
Allow From 192.168.1.34
</Location>
<Policy default>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Policy authenticated>
<Limit Create-Job Print-Job Print-URI>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
/etc/cups/printers.conf:
# Printer configuration file for CUPS v1.4.3
# Written by cupsd on 2010-04-11 22:13
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer hp-laserjet-1005>
Info HP LaserJet 1005 series
Location Presario
MakeModel HP LaserJet 1005 Series hpijs, 3.10.2, requires proprietary plugin
DeviceURI hp:/usb/hp_LaserJet_1005_series?serial=0
State Idle
StateTime 1271020410
Type 8425484
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-postscript 100 foomatic-rip-hplip
Filter application/vnd.cups-pdf 0 foomatic-rip-hplip
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>Are you using Samba?
Firstly a shot in the gloom: If so, have you tried setting
use client driver = yes
in smb.conf, under the printers section? Or if it is yes, try no.
The other thing you can try is to stop the file being printed/removed from the spool directory(s), and see where the lost stuff gets lost.
To be honest, I'm not sure where/how you can do this, but I believe that samba will store the file initially in a spool file specified by smb.conf and then Cups will store it somewhere else. Changing the print commands to not print/remove the file from these two points may help identify the loss point.
Can you plug the printer directly into the windows box and see what happens? -
Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, BelgiumHi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.
Maybe you are looking for
-
Transaction variant for Goods Issue going back to MB1A transaction screen
Hello, I have created a transaction variant ZMB1A for Goods issue. When the goods issue transaction completed by using ZMB1A system again going back to the initial screen of MB1A. (Since it is the base of MB1A) Here the issue is everytime user had to
-
Create a PDF from webpage using entire site option doesn't works
OK, guys, this is the problem... After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FIN
-
Uploading a file to be saved in database
Hi all, I have a web application which users access through browser. There is a screen where I list certificates of a person from database. My requirement is that for a particular certificate, user will select a file and click Attach button. I then n
-
Nokia N97 - My laptop does not recognize my n97 se...
Hi there please help me! I just bought N97, for a couple of days it worked wonderful but today my laptop won't recognise the mobile. I tried it on other computers but still the same. When I select "pc suite" it doesn't recognise my mobile even with O
-
Links wont work when they are in the way of my mega menu
Any links that will be covered by the mega menu when it drops down won't work even when they have not been covered yet. This is frustrating because that means I can't have any links in the top part of my page and I have this mega menu on every page.