Printing issues with Aperture 3 - color management

I just made three prints of the same images, two with Aperture 3 that turned out very dark and off color, almost as it they were printed without color management or double profiles. I then printed the third by exporting the image to CS4 and printing with the same settings (rendering intend, printer settings and custom printer profile) and that print looks fine. Has anyone else run into similar problems with A#? I did not have this issue with Aperture 2.
Thanks,
Message was edited by: pcalvin

I print on an Epson 2880 with Lyson inks and custom profiles. In Aperture 2 it worked perfectly, with exactly the same settings as for printing Photoshop - using the laboratory prescribed settings:perceptual and no black point compensation in Photoshop, and Adobe RGB Gamma 2.2 in the Print settings.
Using the same profile and settings with Aperture 3, the colours are way, way off - exactly as described.
I then tried with Aperture 3 turning off the Adobe RGB setting, so there was no colour space adjustment in the Print setting. This gave a slightly better result, but rather dead and slightly blue.
I ran some tests with the GretagMacbeth colour chart used in preparing the profiles, which confirmed the above but also shows a lack of sharpness when printing from Aperture 3, and a blue border on three sides of the image - even though the border was set to 0.00. I have checked the printer head adjustments and run the test chart through Photoshop again to verify these are Aperture 3 artefacts.
Unless this is resolved, it renders Aperture completely useless! (I have tried reinstalling printer drivers, to no effect).

Similar Messages

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Full screen mode - Issue with Aperture freezing

Hi I have an issue with Aperture 3 freezing if I send an image to a plug-in or external editor while in full screen dual display mode. I have to exit full screen mode first and then send to photoshop/external plugin.
It is not a huge deal and a simple workaround but if I forget to do it Aperture will freeze and I will have to force quit the application.
Any thoughts or suggestions welcome.
Thanks!

Just send a comment to Apple via "Aperture→Provide Aperture Feedback".
IME, both full-screen mode and dual-display mode have some rough edges. (I don't expect any improvements until OS 10.7, which is widely reported to include a full re-design of full-screen mode.)

Is anyone else having issues with Aperture 3 since downloading Lion?

Hi All,
Is anyone else having issues with Aperture 3 after downloading the Lion update? Aperture 3 is running so ssssslllloooowwww !!! I am a sports photographer who needs this to run the way it used to with Snow Leopard. Any suggestions?????
Thanks,
George

It was one of the many issues I had when I was running Lion. I watched the beach balls and the very, very slow rendering of image edits and restored back to my SL clone immediately. It was looking like Aperture 2 and my sanity just couldn't take that again.
I have to assume that Apple must have tested Lion with Aperture 3, but you wouldn't know it from how it behaved on my system.

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

Printing issues with color mgmt on a HP 7180 photosmart printer - Can you help?

I've been have an ongoing issue with my Adobe Elements 6.0 and printing my pictures off a HP7180. The colors don't match what I see on the monitor as well what's on my camera. I can send the pictures to KodakEasyshare online and the pictures come back with the same colors as to what I see within my application and monitor. I've run test pages off my printer and everything is good. Help me, PLEASE.

I've tried printing from both the catalog and the editor screen and I've fooled around with the color mgmt. The printing is still off. The colors are vibrant from what I can see and when it prints it's not as sharp and the colors tend to be dull or maybe leaning towards more green/blue sometimes even more reddish - orange. I've taken the liberty and reseted the printer to factory defaults on the hardware and on the pc...It's till giving me this problem. What's amazing is I can print from Kodakgallery software, photoalbum 3.2 from adobe and the colors are some what true to color. I can't get it to print right with elements.

Print quality with Aperture and Epson RX580

Hi all,
I feel like I've tried everything, but I just can't get Aperture (the latest version with all the updates) to print from my MacBook Pro on my Epson photo printer the way I could from other photo software on my old PCs. On my old PCs, when I would print a photo from Canon DPP or Capture One, or even the Windows photo management software, I get a rich menu of dialogue boxes for the Epson printer offering different qualities of prints, different papers to choose from, "photo enhancement," and lots of other options. Prints came out sharp, colorful, and just great.
When I print from Aperture, I get none of these options (I get color management and resolution, and that's about it).
When I print from Aperture, I get vertical lines in the prints, visible dots, and pixellation. So what I do is email the "exported" versions to my daughter's PC laptop and print from there -- and get good results. Boy, that's a pain.
Surely Aperture can do better than this. So what am I missing? Any ideas for what I should be doing?
Thank you.

Canon MP990 and Macbook pro (os X snow lep.. and Lion) - Lines in prints in Aperture.
While a bit vague I got there and found the distinction between the printer driver managing it and the printer managing the photo quality causing the issues.
I could only transfer the pic's to iphoto and print for ( admitedly about the same time of more than a year).
The FIX
in the first window after selecting print scroll down to rendering and select printer managed.
Select all the other settings you need then select print on the right bottom of this window.
This next dialogue box at the bottom is a show details button then a new set of menus are present (initial is layout in a pull down menu) select color matching then automatic ( you can change this but it worked so if it is not broken I'll play later ).
You should have clear prints with no lines...

Printing Success with Aperture 1.5.2 and HP Photosmart Pro B9180

With so many "hit-and-miss" posts regarding printing, I thought I'd post my result with Aperture 1.5.2 and my newly-acquired HP Photosmart Pro B9180.
Firstly, I have my monitor calibrated using ColorVision's Spyder Express. It's a cost-effective solution to monitor calibration and what I see on the screen is what I'm seeing in the print. I calibrate weekly.
Secondly, I'm using HP's Advanced Photo Glossy Paper for prints. HP provides the ICC profiles for their papers (and thus far, they seem to be dead-on accurate).
Thirdly, and I believe this is where issues can occur, is to set, via the Print Driver, color management as Application Managed. This bypasses the default of allowing the printer to manage color for you. This allows Aperture to use the ICC profile of the printer and calculate the proper color "conversion".
Finally, via the Apple's support article on optiziming print (http://docs.info.apple.com/article.html?artnum=302821) save the customized printer setup for a specified print size, paper, etc.
I have made 20 prints thus far and all have come out satisfactory. The only "tip" I'd make is that I noticed the gamma setting in the print dialogue is ideally set at 1.15. Otherwise, the print seems to be a bit dark.
PowerMac G5 Dual 2GHz Mac OS X (10.4.9) 4 Gigs RAM, CalDigit S2VR Duo 1TB

I just got a B9180 too so thought I would try printing from Aperture. As you suggested I set Gamma to 1.15 - but I still feel the prints are a bit dark. Tried 1.20 but that looked identical to 1.15!

Lightroom print issues with Espon Stylus Pro 4900

I'm having a weird issue with my StylusPro 4900 + Mavericks/Lightroom
My prints keep coming out 1/3rd their normal size.
I spent the day troubleshooting and no luck
Using LR4 ad now CC LR + Installed all the updates.
Uninstalled old the old drivers and reinstalled new.
Restarted several times.
Cleaned up the OSX stuff and more .
I have been using Epson's for over 10 years but have never run into an issue like this.
I'd appreciate any ideas or help!

Not hearing back about the details of your "success" with the Epson driver install, I can only assume that it really does not work correctly - as is the case with everyone else I've read about trying to use the 2200 under Snow Leopard.
The only work arounds are two, and neither is satisfactory:
1. You can turn off Color management in the first photoshop print dialog and then select the color managed option in the second - this defaults to the printer's drivers instead of using those in photoshop. The result is not right - the colors and brightness are noticeably off - but it is "less unbearably horrible" than what you get if you try to print with the correct workflow: Photoshop manages colors in the first dialog and No color management selected in the second.
2. There is a Gutenberg driver for the 2200 that theoretically could let you print without the Epson printer drivers. However, I have yet to encounter anyone who has gotten this to work properly so that it duplicates the color results formerly achieved with the Epson driver and photoshop managing colors under the earlier versions of the OS.
This is not a good thing. Many of us who rely on the Epson 2200 are not suddenly and without warning and with no word whatsoever from Epson... just plain SOL...
Epson should at least say something about this. Their statement could be "we will not support this printer under Snow Leopard" (terrible policy, but at least we could all go out and shop for new HP color printers...), "we are updating drivers for this (these?) printer(s) and will have them available shortly," or even "we are looking into this problem and will respond shortly."
Right now the silence is deafening. There isn't anything at the Epson site addressing this issue at all, and there is no way to follow up on it from the page addressing Snow Leopard compatibility.
Poor show, Epson.

Printing issue with DeskJet 6940

About every 20 pages or so, printing in portrait mode, the printer does a form feed after printing about 1 1/2" of text. It happens intermittently, and there is no apparent logic or pattern.
I have reinstalled the driver, changed the USB cord, but to no avail. My LaserJet CP3505 on the same computer does not exhibit this issue.
Using Windows XP with SP 3, Dell Dimension 3150 with 3.25 GB ram. It also happened with earlier XP versions, so its not an operating system upgrade problem.
It happens with B/W or color printing, always using 8 1/2 x 11 paper from the upper tray. It does not appear to happen when printing in two-sided mode.
I don't know what to try next! Does anyone have an idea?

I have an older HP non-wi-fi printer connected to my Apple Airport Express wireless router which includes a USB port. This makes the printer available with my wireless network which I've used for printing wirelessly with my former Apple PowerBook and now with my MacBook Pro for years. I'm now able to print from my iPhone and iPad as well.
You need to have the printer connected to a wireless router for your wi-fi network, or purchase a printer that is wi-fi capable and if you do that you might as well purchase an AirPrint compatible printer which doesn't require a wi-fi printing app purchased from the app store.

Printing issues with HP 310a All in One Printer

I have a new HP 310a. Looks good, fast on text printing, but features such as merged envelopes and printing letters on A5 stationery do not print correctly; nor in correct order. Photos print larger than they actually are and look like they need to be cropped. Anyone experiencing the same?
Photo tray has nothing to hold paper in place (except on sides); and when tray enters printer, the photo paper slips backwards and error message "out of paper" appears.
This is the last time I will buy an HP product

Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Unable to Print pages08 with pictures to color printer

I am not able to print color pages08 documents containing photographs to my HP 4650 color Laser. I am not able to figure this out. The HP 4650 Color Laser has 128 MB's Ram and never gives me a problem with 20-25MB doc's or 50-60MB color photo files.
The pages file I can not print is a mere 7.6 MB's
Here's the steps I've taken in my investigation: resaved & remamed the file, resaved & renamed on a different drive w/200 GB's free space. Tossed out my pages08 preferences & restarted (Preferences>com.apple.iwork.Pages.plist), and repaired my colorSnyc profiles. After each/all of these I have no luck printing to my HP 4650 color Laser.
Next I created a 3.8MB pages08 test document with 4 pictures dropped into it from iPhoto6. This test file with 4 pictures is 3.7Mb's. Here's my consistent results
I can print this document
- directly from pages08 on my HP 4200 B&W Laser Printer (256MB ram)
- from Preview as a "reduced file" size pdf (version 5 or lower)
I can not print this document to my HP 4650 color Printer
- directly from pages - printer says "20 insufficient memory"
- directly from Preview - printer says "20 insufficient memory
Next, I exported from iphoto6 the same 4 pictures (in original dimensions) to Photoshop & InDesign.
I can print this test document on my HP 4650 color
- directly from Photoshop (.psd file size is 27.8MB)
- directly from Indesign (.indd file size is 2.2MB)
Next, I used the "Template Choose">"Extreme"
- OK printing template (as is) directly to HP color before & after saving
- NO printing after adding 4 different pics using iphoto6
- NO printing after adding 3 different pics using iphoto6
- NO printing after adding 2 different pics using iphoto6
- NO printing after adding 1 different pics using iphoto6
What's up?, there seems to be some hidden printing preference here that is limiting me to adding anything to a pages document, or pages is not handling the information properly.
Any more ideas I can follow? I've never experiences an insufficient memory issues in any other applications with any other documents other applications.

I've replaced the HP printer driver and had no change, my pages08 documents with picture(s) added will still not print.
I can print the pages08 templates as they exist, but when I add or replace even one picture (using iPhoto) the document will not print to my HP Color printer yet will print on my HP B&W printer.
Additionally, I can add 10-20 more pictures and the B&W printer continues to print perfectly. HP claims this is an application program and not the trouble of their printer. I have to agree since only pages document with pictures is my culprit, every program and every massive size document I want to print
There seems as if an invisible limit exists that I surpass when I add a picture. Are there any preferences or settings I've missed, a cache I should clear?
Aside from upgrading to pages09, I hope you can assist with some helpful remedies, thank you.

Printing issues with Aperture 3 - color management

Similar Messages

Maybe you are looking for