Printing labels in Classic

I've been printing sequential labels using Avery MacLabelPro and Mac OS 9 Classic with no problem. I upgraded to Tiger and 10.4.4. Now I get a message "This printer cannot print because this application is not AppleEvent aware and you have not installed Desktop Print 2.0 software". Avery no longer supports this product. Is there a way to configure Mac OS 9 Classic to work again with MacLabelPro?

I figured it out. I went to "Chooser" and selected the correct printer, now it works. I talked to AppleCare, Epson and Avery too. How quickly we all forget how past operating systems work.

Similar Messages

Since upgrading to 8.0 I can no longer print from Mapquest Classic. I an from IE. How can I fix that? ALSO I don't like the new layout. How can I go back to my pervious version?

Since upgrading to 8.0 I can no longer print from Mapquest Classic. It's not a Mapquest problem it's a Firefox problem as I am able to print using IE. I haven't encountered any other sites problems yet but I'm sure it's to come if I don't get this fixed. I need to be able to print. How can I fix this?
I also do not like the new layout. How can I go back to my previous version?

What precisely do you mean by deleting the podcast app from both the phone and Mac? I have deleted the podcast app from my phone but on my Mac in iTunes->iPhone->Apps it shows up albeit with a button labelled "Install". I've resynced 3 times and when I try to access my Podcast playlist in the Music app, I still get a message telling me that podcasts have moved to the Podcast app. I'm really sick of some of the changes Apple has made to their software.

Problems printing with older Classic applications using OS 10.4.8

Newly installed OS 10.4.8. Unable to print from older applications using OS 9.2.2 Classic capability. Error Messages: (1) Not Apple Event Aware. (2) Desk Top Print 2.0 not installed. What is my remedy?

Using latest driver for HP5M printer in both Classic and OSX modes. Printing is OK in all applications except Avery Label Maker and MacProLabel Maker which are very old applications. I didn't have this problem with OS10.2.8. I get the same identical error messages for each as previously stated. I had a similar printing problem with Claris Draw but no error message. I reformatted my old Claris files and now can print.

Print Logo in Classic Report (Write Method,Not ALV)

Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.

Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand

Print labels row*column wise

Hi Gurus,
We have a requirement to create a report which will print labels (RTF layout using XML publisher). Our client wants supplier information (labels, single label of 8 lines) to be printed on a single page i.e. on A4 size paper, 3*8 = 24 labels should get printed like- (Below Lxy is a single label with 8 lines, x and y denotes numbers below)
L01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
L13 L14 L15
L16 L17 L18
L19 L20 L21
L22 L23 L24
This will be a nightly job and once client will come in the morning all the labels will get printed on the A4 size papers. These number of labels in a single request may vary as well eg- it can be either 4 during one night or 29 during another, so this has to be taken care while printing.
I can not call it as a matrix report as number of rows and columns may both get changed dynamically.
Is anybody came across the same requirement? Please provide your valuable inputs.
Thanks in advance.
Rgds,
Sumir

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How do I get spouses and children on to printed labels and envelops?

I store spouses and children in the fields provided for these names. When I go to print labels, Address Book puts the primary name and one randomly selected child name on the first line. So if the person is Jane Smith, I have her spouse listed as John, and two kids listed as Jake and Janice, the label will read.
Jane Smith and Janice
142 Main St.
Nowhere, NH
Can I get the spouse name and the other kids to show up? How?
+Also, any tips on dealing with couples with two last names? That's more of a data entry question, but if anyone has ways this works for labels but also for logical address book and iPhone look up.+

Turn iCloud contact syncing off and choose keep when prompted.

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

HP Officejet Pro 8500 A909g Series capable of printing labels on the CD?

I have Sure Thing label software that can print label information on a printable CD if the printer has the capability. Not able to find any HP doc confirming whether it does or does not. Anyone know for sure? Thx.

Hi,
No, it can NOT print on printable CD/DVD's:
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/18972-18972-238444-3328086-3328086-3752454-3752460.htm...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

How to force Tiger to print doc within Classic environment, not with OSX?

I want to print certain documents using OS9's printing utility within the Classic environment, and NOT using Tiger's standard OSX printing method. How?
I know it is possible because I have two Macs connected to the same printer, and it works on one and not the other. I can't figure out why.
Here are the specifics:
I have a printer, the Ricoh Laser AP2600. Connected to it are two computers:
a PowerBook G4 running 10.4.7, and
an iMac running 10.3.9.
When I print documents from OSX applications, the two computers take the exact same time to print. HOWEVER, when I print from Classic applications, the iMac running 10.3.9 prints very quickly, but the PB running 10.4.7 takes two to three times as long. That's because the iMac prints the document using the old OS9 "Print Monitor" printing utility, and never passes the printing back to Tiger. Whenever I try to print a document from a Classic application on the PB, however, it passes the printing to the standard OSX printing method, which (for some reason) is much slower.
(Sorry if I'm not using the right terminology.)
I checked and double-checked, and as far as I can tell, all the "printer descriptions" and "drivers" and everything else is absolutely identical in both System 9 "Extension" folders on both computers. I installed the exact same Ricoh print-driver packages for OSX and Classic on both machines identically. So -- why does one print quickly within Classic, and the other pass the printing job back to slow OSX?
The specific application that causes this discrepancy is MSWord 5.1a, a very old version that only works under Classic. (I use it a lot because I prefer it to more recent versions of MSWord.)
A secondary, but related, question: Why does printing documents from within the Classic environment go so much more quickly than in OSX? It seems to be one of the few aspects of OSX that's worse than OS9.
So -- how can I make my PB behave like my iMac? Is there some difference between 10.3.9 and 10.4.7 that causes this different behavior? Any hints or suggestions would be most appreciated.
Thanks.

OK, I have finally solved the problem -- mostly.
The trick was to click on the Chooser option called "PSPrinter" -- not LaserWriter 8 or any of the others. I took a chance on that since I knew that the Ricoh 2600 was a PostScript printer. When I clicked on it, and chose "Set up printer," I was able to set up the Ricoh driver. Then, when I tried printing, it worked -- it printed within the Classic environment, not in Tiger. And what a difference!! Under Tiger, a simple page of text takes 45 seconds to process and print. Under Classic, the exact same page processes and prints in 8 seconds! A huge difference. So, I finally got it to work.
The downside is that I can't get it to "stick." If I restart Classic (or the entire computer), the next time I go back to print in MSWord 5.1a (my Classic application), it will have reverted back to the Tiger method of printing. So, the first time I print a page in 5.1a during any session, I have to go to Chooser and select PSPrinter. This adds 15 seconds or so to the process, so printing a single page overall isn't any faster, if you add up all the steps. Subsequent prints all are done quickly in Classic automatically, as long as Classic hasn't restarted. (I can even quit the application and restart it without a problem -- only an OS restart causes it to revert back to Tiger printing.)
So, my basic problem is solved, and I'm fairly satisfied. But I still have two nagging issues that I wouldn't mind answered if anybody knows the answers:
How can I make my Chooser printer selection in Classic "stick" permanently from one restart to the next? Why does it revert to Tiger printing after a restart?
And the fundamental question: why is Classic printing so much faster than Tiger printing? I thought Tiger was supposed to be a "digital hub" that made communicating with peripherals so easy? In most ways it is, but why is printing the one way in which OSX is WORSE than OS9, at least in regards to speed?

Print peoblem in classic environment

I had to temporarily install a new printer on osX (10.2). classic environment couldn't install it properly, but i was able to print from osX.
when i went back to my regular printer, i haven't been able to print from my classic environment. I can print fine from osX, but i desperately need to print a final draft doc from classic. I use the chooser to select the regular printer, but nothing happens, and i can't access the print monitor.
how do i get things back to normal?

What brand and model of printer are you trying to use?
Is it hooked up via USB directly to the iBook or to a hub?

Issue with Printing Labels using PrintToPrinter

Hi,
Recently we have upgraded our reports from crystal reports XI to crystal report 2008.
We are currently facing problems with the labels printed through crystal reports.
I've used the ReportDocument.PrintToPrinter(1, false, 0, 0); method to print the report directly to the label printer.
The problem is, if I export the label to a PDF file and print the report by selecting the printer the label comes out perfectly, but when I print the report directly using "printtoprinter" method instead of exporting it to a PDF, the font size is reduced and the label looks like its shrinked to half the size. Our production server is still running on crystal reports XI and we don't have any problem printing labels from it. Let me know if i'm not sailing in the right direction.
System Details:
OS: Windows Vista Buisness 64-bit
Visual studio 2008
.NET Framework 3.5
Label Printer: Dymo Labelwriter 330
Crystal Reports 2008
Code:
private ReportDocument oRpt = new ReportDocument();
// initialize the repot.
initReport();
oRpt.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
oRpt.PrintOptions.PrinterName = prnName;
oRpt.PrintToPrinter(1, false, 0, 0);
Thank you,
Vijay

Hey Josh,
I'm sorry there was a typo in the link.
Here is the link for that forum Re: Custom Paper Size & Orientation Problem
The solution mentioned by Amit singh in the thread solved my problem. I'm pasting the code here for you to look at.
boReportDocument.Load(Server.MapPath("CrystalReport.rpt"));
        PrintOptions boPrintOptions = boReportDocument.PrintOptions;
        // The paper size used for this report is '14x7'.
      System.Drawing.Printing.PrinterSettings oPrinterSettings = new       System.Drawing.Printing.PrinterSettings();
        oPrinterSettings.PrinterName = "     ";
        foreach (System.Drawing.Printing.PaperSize oPaperSize in oPrinterSettings.PaperSizes)
            if ("14x7" == oPaperSize.PaperName)
                boPrintOptions.PaperSize = (CrystalDecisions.Shared.PaperSize) oPaperSize.RawKind;
                break;
        CrystalReportViewer1.ReportSource = boReportDocument;
Hope this solves your problem.
Vijay

Problem printing labels on dot-matrix printer

I am currently using Oracle Reports v 3.0 on an NT network. I need to print labels on an Epson LQ-570+ printer. The user will run a number of reports which will create a file for each location we need to send to. The user will then send 10 - 20 files to the printer at a time. The problem I am having is that since we went to Reports 3.0 on NT if a file has only one label, it will print that label then page forward spitting out 10 blank labels. It then prints the next file. We are using continuous feed labels and are wasting a LOT of labels. I have tried to reset the page size in the properties page of the report but no luck. Any help would be greatly appreciated!

hello, I could not write English, but I will help you
You could see it in SYSTEM PARAMETERS of reports, in the MODE option, putting the to initial value Character type
You also have to see the Dflt.prt file, that this located in the C:\ ORAWIN95\ REPORT60\ PRINTERS, the who you control the margins of
impression in manner [caracter]. They for [default] are 80 Columns and 66 Lines, the
who you could publish and change the courages
You count me if I operate you.
Greeting

When using Appleworks database for printing labels can I have columns of different widths?

When using Appleworks database for printing labels can I have a column of different width?
Case in point, the supplied avery labels in Appleworks does not have 8195. When I build one using custom design I need a small column between column 2 and 3 to line up the info in columns 3 and 4. All the labels are 1.3/4 inch wide but I need to insert a column 1/4 wide to match up with the avery page....
Any ideas???
Thanks......
---warren

Well, the issue is that when you creat a custom width of 1.3/4 from the edge of the first label to the edge of label 2 all is good. The right and left margins were also set correct in AW. The Avery page, for some reason, has a small 1/4 inch column between the columns of label 2 and 3 therefore making the distance between the left edge of the label in column 2 and the right edge of the label in column 3 - a width of 2 inches and not 1.3/4.
I guess Avery wanted the page to look even.
I did this work around.....
I created a custom lay out of 2 columns (not 4) with the correct width of 1.3/4 from label edge to label edge and the correct left side margin. After printing the first page I just turned the sheet 180 degress and printed the 2nd page to use all the labels on the Avery sheet. Since the upper and lower margin were the same it worked great....
"Great minds think alike"... thanks for your suggetion

Printing labels in Classic

Similar Messages

Maybe you are looking for