Printing Lables
Hello All, I am trying to figure out how to print labels using iWork. I see a templet for business cards, but not label printing?? Can anyone help me with this?
Thanks in advance.
Paul.
pnorth,
Welcome to Apple discussions.
This topic comes up frequently in these group. We're in general agreement that Pages isn't the best tool for address labels. The Print function from Address Book does a much better job.
-Dennis
Similar Messages
-
Dear Gurus,
In the print preview we are able to see the bar code for the batch number. While taking the print out we are not getting the bar code for the batch number.
Any flash lights on this will be appreciated.
Regards,
Madhu.GWe had problem with barcode printing a few months ago. You need to understand the various barcode technologies SAP uses. You can refer to this consulting note 1557674 to get a better understanding. If you're using a SAP Script forms to print lables it most probably it uses old technology like number 1 or 4 mentioned in the note. In that case your printer itself need to support the barcode characters, you need to upgrade/install the barcode font inside the printer firmware. Most Xerox devices do not come with barcode font so you need to download the font and install it on the printer.
Try implementing this note 1558595 , to see if turns old technology to new technology. If it happens then barcode will become printer independent, meaning the printer doesn't natively have to support barcode fonts.
Go to SE73 look up barcode fonts, then test them through program RSPO0031.
Edited by: Jeevan Sagar on Mar 8, 2012 5:03 PM -
How to print lables in SAP SCRIPT
Hi all,
Here i have a requirement in SAP Script How to print the lables instead of Hard coding the field Description. Please help me how to do.
Regards
RaghavaHi
First Create a Lable in script
Refer This link for creation of lable in SAP SCRIPT
How to create lables in SAP SCRIPTS?
Ranga -
Unable to print lables on Zebra printer
Hi,
We have designed a new lable using the zebra software: ZebraDesigner for mySAP Business Suite 2. This software generates a Zebra code and the same is copied in SAP script to pass the command to Zebra printer.
The Zebra printer name is : Zebra Z4M Plus (300dpi).
Font: ^B3 Code 39
We are using SAP Script to print the output.
Error: When we fire the print, the lables are printed "blank". What could be the possible areas where we need to check.
Thanks & Regards
Nayan Shah
<removed by moderator>
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Jan 20, 2011 5:02 PMHi,
Did you follow the steps of SAP #179534? If your zebra printer supports ZPL2 printer language, this should use. You should use devcei type LB_ZEB to create the spool.
Reards,
Aidan -
How to print lables using excel
Trying to print mailing lables via excel… any suggestions?
Export to CSV, and import with Addressbook. Use Addressbook to print labels. By the way, you posted in the wrong forum for Mac OS X 10.7.5. See this tip on where to post:
http://discussions.apple.com/docs/DOC-2463
And make sure to indicate which operating system and which version of Excel you are using. -
How to print lables using the "Spouse" field
I have added the spouse field and added that for each of my friends. The problem is, how can I print both names when I end up sending out Christmas cards this year? For example, if my friend is listed as Peter Smith and "Julie" is listed in the spouse field, how can I print to look like this:
Peter & Julie Smith
123 E. Main Street
Anytown, AZ 85203
Thanks!There was recent discussion on problems with this, and a suggested work-around, but it should be automatic in Address Book and not require scripting.
AK -
Hi Friends,
Does anyone has experience of working with GR label print using output type as WEE1. I just want to know whether it prints the material and other information also on the label. I am only getting the 'label text' for each quanity nothing else. Your help is much appreciated.
Rgrds,
AMSThanks and if the form is standard RM07ETIKETT
-
Printing Lables on Zebra's Z4M using ZPL in SapScript
Hello Everyone,
I've got one major problem. I'm trying to print labels using ZPL-Commands in Sap-Script.
I created a new label as explained in so many posts here: One page, one page window, next page = first page.
I got the ZPL-Code into the SapScript-Form as mentioned in older posts (importing into standard-text. then copy to main-windows of form.).
O.k., everything went fine. And tadaa, I even can print the label out of my quality notification (--> stability study --> storage labels).
O.k., now theres the point I need your help. Is there any idea why there is only one label printed? And not 10 like I wanted to be printed? In SAP-spool there are 10 pages.
Heres the ZPL-Code of my Label:
XATA000JSNLT0MMTMNWMTTPONPMNLH0,0JMAPR4,4MD0JUSLRNCI0^XZ
/XALL0281
/^PW799
/FT152,53A0N,45,45FHFDMuster für Stabilitätsprüfung^FS
/FT256,95A0N,23,24FHFD&MAKT-MAKTX&^FS
/FT256,255A0N,23,24FHFD&QPRS-EINLDT&^FS
/FT256,175A0N,23,24FHFD&QPRS-ABORT&^FS
/FT256,215A0N,23,24FHFD&QPRS-KTEXT&^FS
/FT256,135A0N,23,24FHFD&QPRS-CHARG&^FS
/FT40,215A0N,23,24FHFDLagerbedingung:^FS
/FT40,135A0N,23,24FHFDCharge:^FS
/FT40,255A0N,23,24FHFDEinlagerungsdatum:^FS
/FT40,175A0N,23,24FHFDEinlagerungsort:^FS
/FT40,95A0N,23,24FHFDMaterial:^FS
/PQ1,0,1,YXZ
/E NEXT_WINDOW
/* Neues Fenster für nächstes Etikett
/: NEW-WINDOW
I even tried it without the NEW-WINDOW command, but this didn't work either.
Any good ideas?
If you need more information just let me know.
Thanks.
Dirk
25.06.2007: Hey folks. Am I the only one having this problem?
Thanks.
Message was edited by: Dirk Judas --> Push
Dirk JudasHello Everyone,
I've got one major problem. I'm trying to print
labels using ZPL-Commands in Sap-Script.
I created a new label as explained in so many posts
here: One page, one page window, next page = first
page.
I got the ZPL-Code into the SapScript-Form as
mentioned in older posts (importing into
standard-text. then copy to main-windows of form.).
O.k., everything went fine. And tadaa, I even can
print the label out of my quality notification (-->
stability study --> storage labels).
O.k., now theres the point I need your help. Is there
any idea why there is only one label printed? And not
10 like I wanted to be printed? In SAP-spool there
are 10 pages.
Heres the ZPL-Code of my Label:
XATA000JSNLT0MMTMNWMTTPONPMNLH0,0JMAPR4,4^
MD0JUSLRNCI0XZ
/XALL0281
/^PW799
/FT152,53A0N,45,45FHFDMuster für
Stabilitätsprüfung^FS
/FT256,95A0N,23,24FHFD&MAKT-MAKTX&^FS
/FT256,255A0N,23,24FHFD&QPRS-EINLDT&^FS
/FT256,175A0N,23,24FHFD&QPRS-ABORT&^FS
/FT256,215A0N,23,24FHFD&QPRS-KTEXT&^FS
/FT256,135A0N,23,24FHFD&QPRS-CHARG&^FS
/FT40,215A0N,23,24FHFDLagerbedingung:^FS
/FT40,135A0N,23,24FHFDCharge:^FS
/FT40,255A0N,23,24FHFDEinlagerungsdatum:^FS
/FT40,175A0N,23,24FHFDEinlagerungsort:^FS
/FT40,95A0N,23,24FHFDMaterial:^FS
/PQ1,0,1,YXZ
/E NEXT_WINDOW
/* Neues Fenster für nächstes Etikett
/: NEW-WINDOW
I even tried it without the NEW-WINDOW command, but
this didn't work either.
Any good ideas?
If you need more information just let me know.
Thanks.
Dirk
25.06.2007: Hey folks. Am I the only one having this
problem?
Thanks.
Message was edited by: Dirk Judas --> Push
Dirk Judas
Hello again,
I solved the problem with a little help from a senior programmer. She told me to set the element /LABEL at the beginning of my textelement in main-windows.
That's what I forgot.
Dirk Judas -
Dear All,
I am working at Lable Printing Smartform of material Document. in which when i pass material document range in SF program then generate page accourding maetrial document.
Exmple:
i pass range in program............
Material Document : 460 to 465
then create 6 page in output.
But
i want print lable on one page and if page don't have space then print on next page........
print Tab Lable in Horizotal and vertical Both .....
Example:
Lable 1 Lable2 Lable3
Lable4 Lable5 Lable6
plz guide me.......................Start SO10.
enter some names and CREATE.
Then INSERT--> GRAPHICS (the blue menu upside)
There you have 2 tabs.
Stored on ducmentserver (i think that is the same as SE78)
I used the second tab. Stored as text (it really works)
You can import your graphics there.
There is also another way for you. I have only a example description in dutch
so i will do it very short in English
save your logo in TIFF format (with eg. MS photo editor)
use:
3. SE38 / RSTXLDMC
File D:/Wou/LOGO
Type (BMON=z/w,BCOL=kleur) BMON
Textname ZHEX-MACRO- LOGO
Textt-ID ST
Text language NL
Texttitle blablabla
Line length for text 132
number of greytones (2,4,9) 2
4. In sapscript
Create new window type CONST
/: INCLUDE 'ZHEX-MACRO-LOGO' OBJECT TEXT ID ST LANGUAGE 'NL'.
Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed!
If you need more info don't hesitate to contact
Gr. Frank -
In Address book print window opened too large for window. Unable to close
Using Address book, trying to print lables for a group, print window opened to large for window.... cannot cancel or close out.
In general, in any window presented which calls for user action, if a button is highlighted (usually in blue if the OS is in charge) then pressing Return or Enter will do the same as clicking that button.
Most of the time the highlighted button is the one which is most usable - the "Print" button in that dialog window, for example, or the "Save" button in a Save dialog window.
The keystroke Command-. (Command-periodkey) will usually invoke a "Cancel" button if such is present in a window. -
How do I download my Photosmart D5160 virtual printer to my windows 7
I have been using my Photosmart D5160 printer in a XP Vertual mode on my Windows 7 computer for about eight years now to print lables on DVDs. Somthing happened in the last couple of weeks and the virtual printer won't conect to my Windows 7 computer any more. I would like to know how to download the Photosmart D5160 printer file to Vertual XP program to my Windows 7 computer again so I can print on DVDs.
System Preferences->Sharing, check DVD or CD Sharing to on.
Also, make note of the iMac's IP address in case Windows
doesn't automatically see it and you need to connect
manually. -
Envelope printing from Address book
Does anyone know how to get Address book to print envelopes?
I can print lables etc but application quits when I try to print envelopes.
Cheers
RonDoes anyone know how to get Address book to print
envelopes?
I can print lables etc but application quits when I
try to print envelopes.
Cheers
Ron
When the print window opens you have 3 tabs 'layout', 'label' and 'orientation' in a row below the selection for 'style: envelopes'. Click on the label tab and you should see a tick beside 'print my address'. Untick this box and then it will print without a problem. Whats happened is you have not created your own card: Menu - Card - Go to my card. When you create your own card and leave the box ticked then your address will be printed in the top left. The application simply could not find your address it was instructed to print and quit. There should be no need to mess around with anything else although you might find that the address does not get printed in the middle of the envelope. I think it looks better to change the layout to a custom DL and change the recipient top: 44 to 24 especially on business envelopes. I hope this helps a few people because it had my head wrecked as well.
Derek -
Label print after TO confirmation
Hi ,
I have specific requirment and wonder if there is a standard way to trigger labels after TO is confirmed? Requirement is that we validate SH to from a custom table on staging. If SH matches then we print lable otherwise not.
ThanksI think Yazmin is referring to partner function "SH" ship-to party Manish. If that's the case I believe its possible to print based on a select ship to customer numbers (NACE entries) but it really depends on what output type and other details,
We need better details please Yazmin
Where is this output coming from after TO confirmation? (TO, HU, Delivery, Shipment)?
Is this a custom output type if not what output is it?
Is the requirement to print or not based on an existing custom table or are you just mentioning custom table as a possible way to access a list of SH partners that you want to print the output for?
Please provide as many details as possible to get the best answer to your query.
Kind regards -
Does anyone know if it's possible to use edg_utl sendToStage or sendToEdge to print lables?
Yes, of course. Use "send to edge". If I remember it right, there´s also a specific print method in the same package.
-
HT1338 what is the best program for printing labels, business cards for a Mac book pro ?
What is the best program or app for printing lables,business cards etc. for my Mac book pro ?
I use Pages with the template from the manufacturer of the labels and cards. Works great for me.
Allan
Maybe you are looking for
-
Problem with JNI form C++
Hi all, I'm fairly new to programming with JNI, so please excuse me if I ask a dumb question. I'm trying to call a Java method from a C++ class, but when I run the program, it throws an error, crashing the program. I'm pretty sure the problem is that
-
Can't get my Satellite A210 to work
Hi, please can anyone help? Have Toshiba A210 series. Had it over a year and never could get it to work. I did manage to download one set of photos and managed to play a game that is already on pc, but never got connected to go online. Eventually I w
-
Logic help iMac 10.6.1
I just got the brand new iMac 3.06GHz intel core 2 duo, 4GB, I put Logic pro on it and it wont let me record anything without the cpu spiking. Ive tried everything I can think of and nothing works. Please Help!!
-
Setting and getting focus on controls
hi experts how can i set focus on a control (e.g. like on a button) Ashish
-
Bluetooth plugin or c# based library
Based on the following components and other from the xamarin inc. please tell that which plug-in or library will be used and best suitable (why) for the android Bluetooth application in which a user can track other user activity through Bluetooth. ht