Printing landscape on HP LaserJet

Ever since upgrading to OS X Leopard, I can no longer print in Landscape on a HP LaserJet printer. Does anyone know how to fix or get around this issue? Thanks.

This is the *Using your iPod nano* forum.
Try over here -> http://discussions.apple.com/category.jspa?categoryID=235
or here -> http://discussions.apple.com/category.jspa?categoryID=194

Similar Messages

LEFT MARGIN INCREASES by 20cm WHEN PRINTING LANDSCAPE IN HP Laserjet 5 printer

HI all,
When we migration to FORM 6/Report 6.0, All reports in Landscape layout are printed with 20cm left margin increase when used HP LaserJet 5 printer. It is OK for other printer like HP LaserJet 4050. The problem does not happen on Report 3.0.
Could anyone help me? I believe it is the Oracle bug.
Regards
Chris Sung

Hello,
There were some printer margin issues early on in the 6.0 and 6i releases. Try upgrading to the latest Reports 6i patch (version 6.0.8.15) and see if the problem disappears.
Regards,
The Oracle Reports Team --skw

HP LaserJet 1018 not printing landscape on index cards

I regularly print on 3 x 5 index cards with this printer. In fact, this is the reason I purchased the printer. Just this morning, I am suddenly unable to print landscape on it. Any file set up in landscape will run through the printer and come out blank. However, if I change the set up to print portrait, my prints are perfect. Hm...does anyone have any suggestions?

Hi. Did you ever figure out why you can't print 3x5 index cards in landscape mode on your HP printer? I'm having exactly the same problem. I can print the document on ordinary 8.5x11, but not on index cards. It was working a couple of weeks earlier. I've tried all the obvious solutions but so far nothing works. Thanks.

OJP 8000 Wireless won't print landscape with Quicken 2008 Deluxe R9

Hi All,
I've been using Quicken for years with a HP LaserJet 4L in the "Landscape" mode.
My new OJP 8000 will print landscape from other programs, but not from Quicken.
Computer is:
HP Pavilion dv9500 Notebook
Vista Home Premium Service Pack 2
32-bit OS
Printer is:
Officejet Pro 8000 Wireless Printer - A809n (C9297A)
Install disk is: Officejet Pro 8000 A809, Vista Version 12.0.0
Quicken is:
2008 Deluxe R9
Thanks for any help,
Scott

I don't have a solution for you, but I feel that I should mention that Quicken has all kinds of printing problems since last years release. I've basically given up on Quicken as a result. I have found that with online banking I don't need to use Quicken as much as I used to. It's really a shame that a software company should screw up a really good product over the years, but that's exactly what they did. They have known about these printing problems for the last 2 years and have done little to solve them. Soon I will be uninstalling it from my computer.

Print landscape report in character mode

Hi!
It seems that I should change xxx.prt file in DESFORMAT parameter to match different kinds of printers in order to print landscape report in character mode.
Our customers are international wide. How can I do to make this setting meet every customer for printing reports in landscape style?
We will run the reports on Unix on the middle tier and customers read them in browser.
Thanks for help.
null

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

Printing problem with HP LASERJET P1007

SINCE I UPGRADED TO MAS OS X SNOW LEOPARD I AM NOT ABLE TO PRINT TO MY HP LASERJET P1007 CONNECTED TO AIRPORT EXPRESS. KINDLY HELP

HP LaserJet 1020 Wi-Fi SOLUTION (after 10.6.3 update)
Our 1020 stopped printing via Airport . . .
SOLUTION:
* Take usb printer cable from Airport base, and plug into Mac
* "Add Printer" in System Preferences
* Choose "HP Laserjet xxx.224" driver (tip: type digits of your printer model ## in search bar to find more quickly)
* Test print via the USB
* Return usb cable to the Airport base
This worked for us; your mileage may vary . . .

Using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up

using a mac 10.6.8 to print duplex to HP laserjet P1606dn, order of paper comes out mixed up as follows: the first page out is page 2, with 1 on reverse side, next page is page 4, with 3 on reverse side., etc. This requires that I re-collate every paper I print. Have tried a few things in set up and re-installing the printer, but still not fixed.

I am having the same problem. Nice to see that HP has not responded.

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one
When I try to print a chart from Excel 2007 I get a low memory error. All other printing seems to work just fine. I thought it might be because of a color fill in the chart area so I removed the fill but I'm still getting the error.
I've also cleared the fax memory and run through the steps in http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00378226&prodT...
Running: Windows WP pro (SP3)
Printer: LaserJet 3015 all in one
Current driver: HP Lasetjet 3015 PCL 6
Running as a network printer using a D-Link DP301P

When an application is installed to the expansion card, that's the only place where you will see it in the app launcher screen, i.e. by selecting the card. It will not appear in the All category because that only shows apps which are installed to internal memory.
As for the Files application, yes, it only lets you browse contents of the card. For a more robust file management utility which will let you browse your entire phone, you might want to look into a freeware application called FileZ, which I believe is available at www.palmgear.com and other places.
I've never run Documents To Go from a card, but when you open Docs to Go and open the Menu > Options > Manage Applications, there is an option there to move applications to the Card. Never having done that, I'm not sure whether it moves the whole DTG app to a card but, give it a try.
I have oodles of applications and documents stored on my Centro's internal memory, and never have run up against a memory problem. At any time, you can check available memory by going to the application launcher (home) screen, opening the menu, and selecting Info.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Leopard printing problems with HP Laserjet 5000

Hi to anyone who might be able to help.
I've just installed Leopard, and now my HP 5000 Laserjet (hooked up via ethernet) will not print. When I print, the computer says it is printing, but the printer never prints anything, and even though the printer shows up in the print window, the computer never actually finds the printer. I have downloaded the latest driver from the HP web site, which hasn't helped at all....
Any help would be greatly appreciated.
Thanks
Angus

Hi Gus1,
Since it's hooked up via Ethernet, I assume then it's a 5000N? We have one of those and it works just fine in Leopard. So there must be something wrong in your setup. Two things you can try.
1) It's an old, kind of slow protocol, but it works. Turn on AppleTalk. It's in the System Preferences under the Network tab. Choose "Ethernet" in the left pane. Click the "Advanced" button. Click on the AppleTalk tab and turn on the check box for "Make AppleTalk Active". Choose "Print & Fax" in the System Preferences and remove any entries for the 5000. Click the Add button and then the Default button. The 5000 should show up and show AppleTalk as its connection. Choose it and click Add.
2) On the printer. Press the Menu button to the right once so the display reads, "Information Menu". Press the Item button twice to the right so the display reads, "Print Configuration". Press the Select button. The printer will kick out two sheets. On the first page under the "Printer Information" heading is the IP address for your printer. It's the second entry from the bottom labeled, "HP JetSend Address: ip: 192.168.5.6 (your actual address will of course be different).
In the "Print & Fax" heading of the System Preferences, remove any entries for the 5000. Click the Add button and then the IP button. Under the Protocol pull down menu, choose "HP Jet Direct - Socket". Under "Address:", enter the IP address on your printout, like my example of 192.168.5.6. Under "Name:", put in something meaningful, like "HP LaserJet 5000N". Assuming you have the PPD installed, then under "Print Using:' choose "HP LaserJet 5000 Series". Click the Add button.

Cannot print duplex with hp laserjet 1536dnf mfp

I am using a HP LaserJet 1536 dnf MFP printer in Windows 8.1 with USB 2 connection. Cannot print on both sides of sheet because clicking on print properties does not bring up the properties dialog window. There is a momentary flicker as though it is trying to activate, but no window. It worked fine until a few days ago and I can't think of any change that might account for this. Any help with this problem will be greatly appreciated.

Hi @Marlin1 ,
I understand that you are having issues duplexing, the printer properties aren't opening to make any changes. I would really like to be able to help you resolve this issue.
You can always restore your computer back to a earlier time when everything was working properly. It may have been from a Windows Update. How to refresh, reset, or restore your PC on Windows 8.
If you would prefer not to do the System Restore, you can try the following steps provided:
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
Uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP LaserJet Full Feature Software and Driver.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

I can't print to my HP laserjet 2200

After installing Mac OS 10.4.4 Tiger on my Mac G4, Illustrator CS2, version 12.0.1, Adobe Acrobat and InDesign won't allow me to print to my HP LaserJet 2200.The error message says the PPD is wrong. I can use my Epson printer, and the LaserJet works as usual in Word and Mail, and even in Photoshop CS. It was printing fine until OS 10.4.4. It seems to be the Adobe products mentioned that have a problem. The printer uses a USB port, and shows up correctly in the System Profiler and in the Printer Setup Utility. I also repaired permissions. Can anyone tell me how to regain the use of my printer?

success at last! I somehow found PPD drivers for HP laserjet printers on the Adobe website. http://www.adobe.com/support/downloads/product.jsp?product=44&platform=Macintosh
Nowhere on the Adobe website do I see any indication that this PPD needs to be added when upgrading to OS 10.4 Tiger. Nor is it on the Apple site.They really should make an effort as there are pages of Forum postings regarding this problem.
I had to upgrade Stuffit to 10x as well in order to expand the download. Once I did that the old HP2200 printer file had to be deleted from the Setup Utility, and the new printer driver added. After doing all that, my print dialog windows returned to normal and printing was restored. Thanks for your help. It was a nightmare. By the way, I did try the trial version of Fixamc, which didn't work, but cleaned up some files. They were very responsive to my e-mail request for assistance.
Louis

Printing files to HP laserjet 1022

I have had problems with printing to a HP laserjet 1022 printer ever since I installed Snow Leopard. I did not have any problems with printing under Leopard.
1. Now whenever I try to print a word document or a PDF document, it would print only odd number pages and skip even number pages. Only very rarely does it prints all the pages without skipping.
2. When a document finishes printing, sometimes it is not cleared/dropped from the print queue, so that when I send a second document to the printer, it starts to print the 1st document again. I have to manually delete the 1st document to prevent it from printing again.
I have tried to download and install the latest printer driver for this printer from HP, but it does not seem to solve the problem.
Thanks.

There was just an update of HP printer drivers the other day.
http://support.apple.com/kb/DL907

Can't print with HP Color LaserJet dn2605

I haven't been able to print my HP Color LaserJet from Early 2008 Mac Pro using 10.9.4. I have attempted to print on the network and USB to no avail. I have deleted the printer, reset all printers and scanners. Once I delete or reset the printers, I always have to recycle/rebounce the printer so it can be found. Once found and I select it by the "Use" drop down, there are two(2) HP Color LaserJet 2605 profiles. I can select either one and sets-up the printer. Once I attempt to use the printer, the print job goes to the queue and few minutes later the printer starts initiating and sounds like that a paper is getting ready to move and it stops or quits. I then receive the yellow light a problem occurs, thats all the farther it goes. I have the latest printer driver update 19.9.. I also have reloaded the OS 3-4 times. Here is what I receive the print queue when it fails: "Stopped - Unable to write print data: Broken pipe".

That's sounding like a printer problem, not software.
But just in case, try deleting the HP folder from /Library/Printers, then Reset the Printing System and add the printer again.
OS X Mavericks: Reset the printing system
If that doesn't work, use a browser and connect to your router, and see if you can identify the printer in "connected devices."
(a printer that changes IP address whenever there is some change on your local net will give symptoms like that)

Printing landscape on HP LaserJet

Similar Messages

Maybe you are looking for