Printing layout on safari 3 is wrong

hey there guys, minor issue here but could use the help. everything about safari 3 is ok however when i go to print the default layout setting for safari has the paper horizontally instead of vertically, which is using up extra paper to print something that would obviously fit one page. i don't see any options on how i can make it revert back to normal, help please

there is no option in page setup, it still shows the preview horizontally. the best i can do is set it to print two pages onto one, which in theory works but the font is reduced down. its like reducing the size smaller for no real reason, i already tested firefox and it prints it normal. so i can't figure out what the safari browser has the page layout different from normal

Similar Messages

Query Print Layout - Incoming Payment

Hi All,
I have done the query print layout for incoming payment. but it cannot show the correct A/R invoice: document number. When I only make the payment for 1 invoice it seems to be correct, but when I choose 2 invoices to be paid, then the A/R invoice: document number for the second row is wrong ( if follows the first row).
Below is the query:
SELECT T0.DocNum, T0.DocDate, T0.DocCur, T0.DocTotal,
T0.DocTotalFC, T1.DocNum, T1.CardCode, T1.CardName,
T1.DocDate, T1.Comments,T1.TrsfrRef as 'Cheque No',
T2.BankCode' 'T2.AcctNum as 'Bank Code' , T0.Address , T3.Phone1 , T3.CntctPrsn , T0.PaidToDate, T0.PaidFc , T4.AppliedSys , T4.AppliedFc
FROM [dbo].[OINV] T0 INNER JOIN ORCT T1
ON T0.ReceiptNum = T1.DocEntry LEFT JOIN RCT1 T2
ON T1.DocNum = T2.DocNum LEFT JOIN RCT2 T4
ON T4.DocNum = T2.DocNum LEFT JOIN OCRD T3
ON T1.CardCode = T3.CardCode
WHERE T1.DocNum = [%0]
ORDER BY T1.DocNum
the fields that i want to display in repetitive area are: A/R invoice: Document date , A/R invoice: document number, Amount that they have paid ( partial payment / full payment) i used this database: Incoming payment - a/r invoice: paid, outstanding amount i used formula ( total document - paid to date), and document currency
Thank you! hope you can help.
Pauline

Pauline,
I've tested your query in B1 2007A SP00 PL30 and works fine. I even created PLD for the query and I can see 2 invoice paid by one incoming payment.
Rgds,

Changing iCal Print Layout

Hi
When I print a calandar month, the month and year are top left on the paper so that when I hole-punch the page to stick in my filofax, the month has got a big hole in the middle.
Is there a way of changing the print layout so that I can move the month a bit towards the centre ?
Any suggestions very welcome. I hate it looking untidy !!

I've been battling the lack of a "Page Setup..." menu in iCal for several hours, even after reading the fix above. Some of my conclusions and a tip:
1. It seems that iCal 'gathers' the paper/printer info when it starts up. It is therefore a waste of time to set these dimensions while iCal is still running/open.
2. Any app that allows access to the "Page Setup..." menu can be used to create/modify a custom/existing choice.
3. It may be better to set up a 'custom' setting using "Any Printer" rather than any specific printer you may have.
Perhaps the most important fact I discovered is that it is more important to set the paper dimensions than the actual margin numbers! iCal seems to prefer using a minimum margin setting regardless of what is defined in any "Page Setup..." item. But it will recognize and respect a slightly smaller page size and print within it. For example, my final success came when I re-defined the normal 8.5 x 11 inch paper as 8.25 x 10.75 inches! Just be sure to crate this as a custom, named setting so you can find and select it in iCal.
BTW, I have not attempted other 'standard' paper sizes, just the 'full-size' version.
Anyone have an idea why iCal ignore the GUI standards?! Or is simply another attempt at 'integrating' all apps; like using Safari to tell the OS to use another browser? What happened to Apple's 'user friendliness' mantra?

Down payment document differs from print layout since SBO 2007A PL45

Since upgrade from PL42 to PL45, we have ceveral problems.
- Print Layout wrong:
1. We have a sales order with 7 positions, 2 of these 7 positions are already delivered and paid.
Based on the sales order, we post a down payment invoice that has the correct 5 positions from the sales order. When selecting print preview (it doesn't matter, if it is a user defined print layout or a SAP standard layout), we get all the 7 positions that are in the sales order.
2. Also down payment invoice: We have one position with 3 items, the document shows the unit price correct and also the price for the position (price per unit x3) correct. The print layout only shows unit prices.
3. sales order has another currency rate then the down payment and the following invoice, as they will not be posted the same date. The documents show everything correct, but the print layout only shows the currency rate from the sales order (also in the following documents like DP invoice and final invoice).
- a lot of dump files....
Does somebody knows a solution for these problems or does somebody knows, if they will be solved in the PL46 or 47?
Thanks a lot.
Katrin

Hi katrin,
In case you are recieving Dump files with a system standard layout,kindly log a support ticket with
SAP support.Please attach the dump files and describe the scenario to reproduce the issue.
Abhinav Banerjee
SAP Business One Forums Team

Print Layout Problem

hello all,
im wrongly posted this in SDK, im reposting it here. thanks.
i made a UDF Invoice Number(BP invoice #) in Marketing doscuments in the document Header and i want to print this Invoice Number in the outgoint payments.my problem is i cant fetch the UDF(Invoice Number) to my Print layout since i made my UDF(Invoice Number) in the marketing documents and im fetching the UDF(Invoice Number) in Payments.
Please Help...
Fidel

>
Thanga Raj.K wrote:
Hai!
1. U are having a UDF in A/P invoice.
2. U are adding some value (refer) on that UDF while adding the invoice.
3. U want that value to be dispalyed in Payments.
4. Add a new UDF in Payments - Invoice Rows
5. Assing a FMS in Payment UDF with auto refresh on BP.
6. Bring that into PLD.
Regards,
Thanga Raj.K
hi Thanga,
i did the steps as what u said, step 4, i added UDF (BP Invoice Number) in Payments please see image
[IMG]http://i264.photobucket.com/albums/ii184/abing430/SAP/UserFields.jpg[/IMG]
also please see image of my A/P Invoice here u can see the UDF(Invoice Number in Marketing Document)
A/P
[IMG]http://i264.photobucket.com/albums/ii184/abing430/SAP/APInvoice.jpg[/IMG]
also please see image of my Outgoing Payments that has already an FMS on UDF(BP Invoice Number in the Payments)
Outgoing
[IMG]http://i264.photobucket.com/albums/ii184/abing430/SAP/OutgoingPayments.jpg[/IMG]
here is my actual Query that i save for the FMS "SELECT T0.U_INVOICE FROM OPCH T0 WHERE $[$-5.0.0]" and using this query i got an error and i cant get my desired result. i'm having trouble in making the query, please help.
best regards,
Fidel

Print settings in Safari

How do you change the settings so when you click on the title bar printer ICON it does not default to landscape mode??
I would also like to get rid of the web address that prints on the very bottom of a print out when printing a web page.
Any suggestions??

Greetings,
You need to change your Page Setup options. Assuming your using Safari 3.2.x, I believe you need to go to File > Print… in Safari and, select "Page Attributes" from the pop-down menu for Settings, select your paper orientation, then print your document. Your orientation should remain the same until you change it. The Page Setup… options are part of the Print… window in Safari versions higher than 3.2.1, if memory serves me; I could be wrong.
For the headers and footers on a web page, you can omit those from the Print… window by choosing Safari from the pop-down list directly underneath the "Presets" text and uncheck the box where it says "Print headers and footers".

Limited Logistic cannot change open Print Layout Designer?

Dear Experts,
My customer has multiple Purchase Order layouts, they are using Limited Logistic user license and have full authorization to Change Default Report.
However, when they click on the Print Layout Designer, the pencil icon from toolbar, an error message prompt, You cannot open Window [60213] Type List Form with your current license.
Online License Authorization document that i have read does not provide details information about Limited Logistic vs Print Layout Designer.
Can someone please advice me is it SAP limited logistic license design or is it a bug or is it some setting has been done wrongly?
Thanks.
Regards,
Lay Chin

Hi Gordon,
The SAP Note No: 1223477 is indicating what happend last time. But for the new customers who start using SAP B1 8.8, when they purchases limited logistic, they get limited logistic license with the correct access right defined in https://websmp203.sap-ag.de/~sapidb/011000358700000953982007E, no more professional license is given.
Below statement is quoted from SAP Support Portal:-
New user types are now enforced
The new user types that have been introduced in the SAP Business One pricing and licensing model are now enforced in the SAP Business One 8.8 application: The limited users and indirect users are implemented; the use of the add-on access user is re-defined (this user will now be a normal user).
Please correct me if I understand the statement wrongly.
Thanks.
Regards,
Lay Chin

Dunning Report Print Layout Issue

Hi
I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
In the print out all the due dates are mixed with the acctual Due dates.
Acctuall Invoices
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     25.02.08              1
10002                     03.03.08              1
10003                     03.04.08              0
Print out
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     03.03.08              1
10002                     03.04.08              0
10003                     25.02.08              1
How can I fix this. This is coming from the System template and we havent change anything.
Could you please help me.
Thanks
Sanjaya

Hi
I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
kind regards
Søren
Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM

Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

CREATING PRINT LAYOUT IN CRYSTAL REPORT

how to create print layout that will show the encircle below. thanks

Hi Romel,
Please check below Query.
SELECT T0.[DeposDate], T1.[CheckNum], T1.[CheckSum], T1.[BankCode], T1.[Branch] FROM ODPS T0 INNER JOIN OCHH T1 ON T0.[DeposId] = T1.[DpstAbs] WHERE T0.[DeposDate] >=[%3] AND T0.[DeposDate] <=[%4]
Hope this helps
Regards::::
Atul Chakraborty

Print Layout Designer or Crystal.....! What to do?

Dear All,
We need to link our User forms to Print layouts in order to make our reports work exactly the way SAP reports work. Is there a way to enable the print and print preview toolbar buttons and make them show our Report Layout? So far the response from SDK Forum is not encouraging and many questions regarding the same issue remain unanswered there.
After looking for the solution in the SDK Forums we came across these two replies from Mr. Nick He and Mr.Frank Moebius. Both are of the opinion that currently SAP does not offer a support for this feature and better use a third party tool. We are not in a position right now to opt for any third party tool but if we get a clear response from your side regarding this matter, we can go for it. Kindly have a look at the following links:
Re: Print Layout Design for user form in SapBusinessOne2005A(6.80.317) sp:01.?
Re: Add PLD Layouts in 2005 through sdk
The recommended solution within SAP B1 to develop Add-on reports is through User Queries and creating a Print Layout and run them via Query Manager Window. This approach in our view has the following drawbacks that make it less friendly with the end user:
1. Add-on forms appear in the left pane/menu, whereas reports would have to run through Query Manager only, which is in fact a small toolbar button on the top right side. We can add the Query Manager link to user menu but it doesnt solve the problem.
2. A user with full authorization over the Print Layout can accidentally overwrite it by clicking the Create Report Button, whereas in case of SAP Reports the Layouts remain unchanged and only saved as a new Layout and set as Default Layout for a report. Add-on Reports cannot do this.
3. Different behavior of Layouts in Query Manager on Single Click and Double Click. In the Query Manager, if a user just selects a query by a Single Click and views a Print Preview (Layout) then the custom user Layout appears. But if a user Double clicks a query then the Query Window appears, exposing the query and making it editable. Also the Preview(Layout) is different in this case. The user can either view the Window or Table Layout in this case. Hence this exercise would make the user confused and prone to errors.
4. The Parameter/Criteria window that is SAP generated is not enough to fulfill user friendly interface requirements. Is there a way to add List boxes or Combos to that form. The parameter selection Checkboxes also behave in a strange way that even the experts find difficult to manipulate. If they are of no use, whats the point in having them on the form in the first place.
All these points are leading us to confusion over the decision as to whether go for Query Based Reports or use Third Party tools. Kindly help us out in this regard. Your response would help us save some valuable time for our Add-on Development.

<<< If there is a solution then it has to be from SDK. We can only opt for third party components and frameworks only if any of the SAP representatives ensure us that the current version of SDK does not offer such support.>>>
The answer to that is to lodge your query as an Issue to SAP directly as a support question or go through your local SAP representative. If the functionality is not offered by SAP you can do a Development Request ( DRQ) and SAP will develop it if they think it will become userful.
<<<If this Forum is not meant to be answered by SAP representatives then kindly tell me any other Technical Support Portal from where i can get the answer directly. >>>
This forum is accessed mostly by SAP Business One Developers on SDK. However we are fortunate that some SAP employees who are very knowledgeble take some time off to answer queries.
Since it is a Forum, no one is obliged to answer. As indicated above , Try SAP directly if you need a definite answer.
<<<>>>
Since you mentioned Crystal: We as SAP Business One SDK developers, have come across similar issues and opted for a Inhouse developed Crystal Solution. It has been so popular we are selling it as a Generic add-on to B1.
Regards,
Indika.

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

How to create authorization to access Query Print Layout?

Hi again..
i have 10 query print layout, and not every user can view this layout.
I assume,
report 1-3 only for user A,
report 4-7 only for user B, and
report 8-10 only for user C.
How to create autorization for Query Print Layout?
Thankyou for the help

Dony,
In order to createthe PL's of customize report (from Query Manager) you will have to go the Tools Tab of the Menu Bar in which you will have to click the Queries tab which will lead to a drop down menu which when clicked will lead to Quaery Print layout. You will have to choose your query based upon whether from the reports tab double click it to open the Query Print Layout Designer.
Here again in the Menu Bar you will find the under the Tools the first tab is the PLD which when clicked you can do the same process as explined below
When you go to the document ( Any Document ) in the tool bar you would find the 24th Icon to be the Print Layout Designer Tab when you click this it takes you to the layout designer window.... below there is tab named set as default when you click this the system would ask you 2 choices
1. Set as default for all users
2. Set as default for current user
Which means that you will have to open each and every form?
for each and every user and set them as default for the user.
If you feel this answer is helpful then please do remember to reward points
Regards,
Nagesh.

Help me . Query in " Query Print layout Design "

Hi Everybody .
I Design Report by Query Print layout Design , So when I run Report , I see Message : " Table not found Administrator (OA DM)" .
This is My Query .
( Note :this Query is run ok in Microsoft SQL . )
Select Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50))As No_Number , T0.TaxDate As Date , case left(T0.Account,4)when '1112'then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType)end as Amount1 , case left(T0.Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType) end As Amount2 , T1.U_VNS_MEMO As U_VNS_MEMO, T1.U_VNS_VNUMBER as PV_No , T1.U_VNS_JType as 'Voucher Type' , T0.Account As AC_Code , T3.AcctName as Description , T0.Debit As Debit ,T0.Credit As Credit , T1.U_VNS_NAME, T0.U_VNS_REMARKS From BTF1 T0 Inner Join OBTF T1 On T0.BatchNum = T1.BatchNum Inner Join OBTD T2 On T0.TransID = T2.BatchNum Inner Join OACT T3 On T0.Account = T3.AcctCode Where T0.BatchNum = '[%0]' Group by Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50)) , T0.TaxDate , case left(Account,4)when '1112' then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(Account,4),T1.U_VNS_JType)end , case left(Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(Account,4),T1.U_VNS_JType) end , U_VNS_MEMO , T1.U_VNS_VNUMBER , T1.U_VNS_JType , Account , AcctName , T1.U_VNS_NAME, T0.U_VNS_REMARKS order by Amount1 desc
Please help me .
Thank you very much .
Message was edited by:
Tran Ba Hai

Note: This Quey if I change = [%0] by = 1 , and I run Report in SAP is ok .

How to use query print layout design

i have a sql query and i want to see its result on report with the help of print layout design.

In addition to Tuvia's answer, here is the printing procedure of query PLD:
Printing User-Defined Queries
Use
After you have linked a user-defined query to a user report template, you can print it according to its linked print layout.
Procedure
To print a user-defined query, use one of the following two procedures:
Using the Query Print Layout window:
1. Choose Tools u2192 Queries u2192 Query Print Layout.
2. Choose the Reports tab page and select the query you would like to print.
3. Choose File u2192 Print.
The user-defined query is printed according to its linked print layout.
Using the Queries Manager window:
1. From the toolbar, choose with the quick info text Queries Manager.
2. Select the query you would like to print.
3. Choose File u2192 Print.
The user-defined query is printed according to its linked print layout.
You can also display a print preview for user-defined queries. To do so, choose File u2192 Print Preview.
Printing User-Defined Queries with Variables
Use
When a user-defined query contains variables, its linked print layout will also display the variables data and print them.
In the print layout linked to that query, you can see that an additional area containing the condition's parameters was added
There is pdf file relate to Query PLD in the SAP service marketplace website.
Rgds,

Printing layout on safari 3 is wrong

Similar Messages

Maybe you are looking for