Printing--Linewrap/Metadata/Font-size?

Running Lightroom 1.2 on WindowsXP.
Three questions about printing:
1) Is is possible to wrap lines in the Identity Plate? Ideally, I would like to force a hard line break between Name and Location or Name and Date, such as:
Yosemite National Park
2005
and keep both lines centered within the Identity Plate field.
2) Can Lightroom store print metadata (font size/color, scaling factor) for each print the way it stores Vibrance, virtual copies, tone curves, etc.?
Suppose Photo1 and Photo2 have widely different title lengths (6 letters and 20 letters, respectively). Then I print Photo1 then Photo2 then Photo1 again. Right now I have to re-scale the letters for Photo1 to make them look the same size they were before, even though I printed Photo1 already. That's a real time-waster. Is there a better method when you cannot know which photo will be required to print next?
3) Can Lightroom set font size explicitly instead of using % scale factor? It would be a lot more convenient to set the font size at 10 or 12 or whatever so it could carry over to other titles if you want all your titles to print in a specific font size (e.g. 12 points)
Thanks,
Robert

Thanks. Sorry. I typically don't repeat questions.....
Any guidance on my other 2 questions above?
Robert

Similar Messages

Adobe Form's First Page printing perfectly on 132 column sheet but further pages prints with small font size

Dear All,
We are facing a strange behavior of adobe form.
we made form for SAP CRM which is printing in 132 column(28cm * 33cm) sheet. what we are observing is, first page is printing perfectly on the pre printed Invoice sheet but if invoice has more items to be displayed then second page prints with small font size or you can say second page seems to be zoomed out to smaller page size. In Preview Second page onwards also looks perfect. Now we are in a fix what to do to come out of this issue.
efforts made:-
Adobe Page Size Adjusted.
Select paper Source by Page Size ticked in Adobe form properties
But still result is non satisfactory. Please Help.
Regards,
Ashkar Rizvi

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

Report viewer is not printing the exact font size format if the application is run through virtual machine or RDP.

Hi good day!,
I'm still having this problem with the font size format of my report, although I already installed this hotfix at http://support.microsoft.com/kb/2768741/en-us, if I run the application using RDP or virtual machine. Anyway, I'm using VS2010 with sql server
2012 express through windows 7. Actually, I tried to search for a new and updated hotfix version but having no luck,:) since i'm not good at it (google search).:)
So, I need help on how to fix this problem.
Your help will be greatly appreciated.
Thanks!
Hardz

Hi JJorheim,
Thanks for the link that you had given. Actually, Previewing the report on an RDP or VM environment is not a problem at all because it yields smooth result based on the report design. The problem only exist if print button icon of the report viewer is pressed
which results to a magnified font size printout. I think it is a rendering problem a somewhat default behavior of a report viewer print method. So one of the remedy is to adjust the resolution of an RDP or VM to 1024x768
(4:3 ratio) as suggested by the others, which momentarily solve this problem but not necessarily the other way around.
Anyway, thanks again for the reply.
Hardz

Keynote 6.1 Printing Presenter Notes (Font Size)

I am a professor and I use extensive presenter notes in my presentations. I have tried printing the slides with the presenter notes but I cannot figure out how to change the font size and other aspects of the printout. I have adjusted the font size of the presenter notes to the size I would like, however when it prints, it just defaults to a much smaller size that is unreadable while I lecture. Is there any way to control the size of the presenter note font on the printouts? Thank you.

I printed out some handouts this morning set at 36 point and they print correctly.
In handouts there is a limit of 8 lines of text but they should print as set in presenter notes.
Font, colour and size of text in presenter notes is achieved by:
select the text in presenter notes pane (commad A)
then format the text using :
Format Font > Show Fonts (command T)

Font size in alv printing

He friends,
While I am printing report from alv it is printing in small font size , Please advise how to increase font size in alv printing .
Regards
S.Sharma

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/b6/e3eb40c4f8712ae10000000a155106/frameset.htm
For Fontsize also you have option in the ADD_TEXT method.
For Details check this program DD_STYLE_TABLE
Edited by: Neenu Jose on Oct 24, 2008 10:37 AM
Edited by: Neenu Jose on Oct 24, 2008 10:38 AM

Standar text font size in sap scripts

Hi friends,
i am facing a problem. i am fetching a data uisng standard text and the text has to printed using font size 2. but when i am trying to print the text it is taking the default font size 6.
can any one help me regarding this.
Regards,
Srinivas

It is not possible to print font size less than 6. Script does not accept the font size less than 6. if the font size is less than 6 the script will print in default font size 6.
Regards.

Print Module - Set Explicit Font Sizes

In the Print Module Identity Plate can Lightroom set font size explicitly instead of using only a % scale factor?
The scale factor is a great idea but it would be a lot more convenient at times to set the font size explicitly to 10 or 12 or whatever so it could carry over to other titles if you want all your titles to print in a specific font size (e.g. 12 points). That's already possible with Vibrance, Recovery and a host of other settings (including the Identity Plate scale factor itself!) and it's very valuable to be able to have those exacting controls.
Thanks,
Robert

Ian,
I'd be very pleased if I'm doing something wrong. From what I see the Identity Plate supports only one font size, and only for the most recent photo. When I choose Edit and type in a new title of a different length Lightroom changes the size of the font (the longer the title, the smaller the font and vice versa). Try this:
1) Open Identity Plate and title the picture "Hello".
2) Change the title to "I just love Adobe Lightroom so very much!"
The title will be smaller. Lightroom seems to disregard the Identity Plate font size.
I just tried your recommendation and no matter how I changed the Identity Plate font size in the Print module (e.g. from 38pt to 8pt) the photo's title text size barely changes, I have to use the Scaling slider every time. That font sizing functionality only works for me in the Library module when I'm creating my actual Identity Plate.
Every time I change pictures I have to re-do this step. The way I'm dealing with this is changing the scaling factor (or with your recommendation, the font size) every time for every different-length title and/or enlarging/shrinking the title box for each photo.
As I explained in my other reply to your other post, this is very time-consuming when you're printing 50-100 titled photos in a single day/weekend (not to mention the fact that it's physically impossible to set every scaling factor so all titles print exactly the same size font).
It would be a lot better for Lightroom to automatically save all the print parameters the way it saves all other of the picture's metadata.
If you could share an easy way to make that much faster I'd be quite grateful.
Robert

HT201272 can someone help me with this chat session.Font Size You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email. Privacy Policy Advisor [4:49 p.m.]: Hi, my

Font Size
You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email.
Privacy Policy
Advisor [4:49 p.m.]:
Hi, my name is Jacob. It'll be just a moment while I review the comments you provided.
Advisor [4:49 p.m.]:
Hello Machelle, how may I assist you today?
Customer [4:51 p.m.]:
Can you please help me recover the new testament of the bible from media group. The have vanished.
Customer [4:52 p.m.]:
I need to recover the lost purchases I made from media group. I had all of the new testament.
Advisor [4:53 p.m.]:
Thank you for this information, I understand that you are missing some purchases. I do want to apologize for this inconvenience. I will be more then happy to look into this for you.
Advisor [4:53 p.m.]:
Would you be able to provide your Apple ID? This is the email used to sign into the iTunes store.
Customer [4:54 p.m.]:
[email protected]
Advisor [4:54 p.m.]:
Thank you, one moment please.
Advisor [4:56 p.m.]:
Were these individual purchases? If so could you provide the name for each individual purchase?
Customer [4:57 p.m.]:
yes it the new testament books of the bible
Customer [4:57 p.m.]:
genesis etc...
Advisor [4:58 p.m.]:
I apologize, but I am not exactly familiar with the New Testament. Would you be able to provide these names for me so I can locate them on my end?
Customer [4:59 p.m.]:
Genisis Mark Matthew Luke John
Customer [4:59 p.m.]:
Exodus Levitus Numbers
Advisor [5:00 p.m.]:
Just a quick question, were these all audiobooks?
Customer [5:00 p.m.]:
Duetoronomy
Customer [5:00 p.m.]:
Yes from media group
Advisor [5:00 p.m.]:
Okay, are you currently on a computer with iTunes installed?
Customer [5:01 p.m.]:
yes
Advisor [5:02 p.m.]:
Unfortunately, audiobooks and ringtones are the only items on the iTunes store unavailable for re-download through iTunes in the Cloud. What I can go ahead and do is try and re-add these audiobooks back to your download queue for re-download. Please note if they have been removed or modified on the iTunes store they may not be available for re-download. Would this be okay?
Customer [5:03 p.m.]:
yes thank you!
Advisor [5:03 p.m.]:
Excellent, one moment please.
Advisor [5:05 p.m.]:
I apologize but after reviewing your account, it looks like we have already issued 3 exceptions for you to re-download your audiobooks in the past. Back on 02/23/2013. I apologize but we will be unable to do another exception for you.
Customer [5:06 p.m.]:
that down load did include the new books of the bible that I had.
Customer [5:07 p.m.]:
that down load did not have the new testament books of the bible that I had
Advisor [5:07 p.m.]:
While reviewing the notes, this was issued to add all available audiobooks bought on your account. I again apologize but I will be unable to issue another exception to you. As the previous advisor did inform you to make sure to back up your files.
Customer [5:08 p.m.]:
the other advisor did not down load the new testament books. The advisor did not restore all of the books that I had originally brought.
Advisor [5:10 p.m.]:
While looking closer, the books that you are missing are no longer available to be re-downloaded. This is the reason why they were not added back to your download queue when he issued them. Unfortunately, as we do not handle the content on the iTunes store you will need to get in contact with the publisher of the content as they were the ones two remove or modify these books on the iTunes store. If you would like I can provide a link to their support site.
Customer [5:11 p.m.]:
yes they are I saw them.
Advisor [5:11 p.m.]:
They may have been modified by the content owner. This will be the reason why they were not added. As Apple does not control 3rd party content on the iTunes store. You will need to get in contact with them as we are unable to re-add this content back to your download queue.
Customer [5:12 p.m.]:
it is I just looked at it in the itunes store
Customer [5:13 p.m.]:
the material is still the same. The store does have it.
Advisor [5:13 p.m.]:
Machelle, if the items have been modified since you bought them, they will be unavailable for us to issue them back to you. You will need to get in contact with the providers for these books as they are the content owners and we do not have access to issue these back to you.
Customer [5:14 p.m.]:
the are still the same bible books that I purchased at the store.
Customer [5:14 p.m.]:
The audio books are the same. When I buy it again nothing will be different.
Advisor [5:14 p.m.]:
Machelle, I understand this. This is what our records are showing. When the previous advisor tried to re-issue them to you they were unable to as they have been modified on the iTunes store.
Advisor [5:15 p.m.]:
In order to receive further support for this issue you will need to get in contact with Media Group as they are the content providers for these audiobooks.
Customer [5:15 p.m.]:
I will buy them from another source. Don't say they have changed. The books are the same books I brought. They are at the store.
Advisor [5:16 p.m.]:
Machelle, Apple does not handle the content for 3rd party publishers on the iTune

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

Printing Crystal Report decreasing font Size in web.

Printer reduces font:
when we use crystal report`s print button to print report, It reduces original font size....
I am using Crystal report viewer to preview and print the report in which print mode is "pdf". I tried with "ActiveX" mode but its generate error...
I using Crystal Report 13.0 in asp.net2010.

Make sure you are on SP1:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
See KB [1218753|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do]
Next time, don't forget to search these forums and use the search box in the top right corner of this web page to get KBs, wikis, blogs, etc., etc.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Increase font size of a print out

Hi,
We neet to print one ABAP report in landscape. The font is very small to be visible. So, we need to increase the font.
Currently while printing on a local computer, the format its using is X_65_255.
Please suggest me what has to be done to increase the font size to get the report clearly visible.
Thanks,
Sailesh K

Right!! This will happen, this is why I suggest to shorten the size of the report, get rid of gaps in the columns, get rid of un-needed columns, etc. This is the only way to get the font size to increase, because the system wants to show all the data in the report, so it shrinks the font to accomodate the 255. A 132 format looks very good on an 8 1/2 X 11 sheet in landscape. The font is a very good size, as you increase the columms, the font will decrease. Do you understand why it is this way? Think of it this way, if you need to put 500 characters across the page, what do you do? Shrink the font, right? This is what the system is doing when going with larger number of character columns. If you want to get the report to a nice readable font size, you must bring the format down to 132 characters across.
Regards,
Rich Heilman

Can I specify font size=1 when printing HTML?

I want print my HTML report in font size = 1. I don't know how to do it?
When using report builder, there seems no special control for printing HTML?
Hope experts here broaden my mind
Richard

This is possible
1) In Builder paper layout select the object for which you want to change the font size
2) In menu
Format --> Font
You can change the font and its size
Then generate to html/htmlcss . I have verified this
Thanks
The Oracle Reports Team

How can I increase the font size of my email when I print it out, it is printing tiny

How can I increase the font size when I print out emails, it is printing tiny size?

In the Print dialog window, click the small reveal-button to the right of the printer's name -
The window will expand to show additional settings (similar to 'old' Page Setup) -
Be sure "Scale:" is set to 100% and the 'Keep apparent font size' item is checked.

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How do I change the font size of a document when I PRINT?

How to I change the font size of a document when I print it?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

Change font size in printer friendly template

Can anyone please let me know where to change the font size in a printer friendly template?
Thanks!

Basically I want to change the font size only in the printer friendly page of the report and not in the orginal report. Any ideas?

Printing--Linewrap/Metadata/Font-size?

Similar Messages

Maybe you are looking for