Printing logo in smartform

Hi all,
I've embedded a logo (background color is white) in tif format in a smartform.
When I print it out with printer A, it looks perfect. But strangely, when I print it out with printer B, the logo's background color becomes dark.
I just want to make the logo's background to white with any printers, what's wrong there?
Thanks.

HI ,
Please save the logo file (Bmp format) as 256 colors then upload the logo using se78 and then incarporate it in your smart form . you can avoide gray back ground ..
*Please mark useful answers

Similar Messages

Printing LOGO on smartform based on Printer

Hi All,
I want to print LOGO on my smartform(PO) based on a Printer which i am using.If i use one perticular printer(PRIMO) i should get the LOGO and for other Printers it should not appear.Will it be possibel to control the printing based on a printer condition? if yes please suggest me where i can add these conditions.
If u need any further information please revert back to me.Thanks in Advance.
Best regards,
Shanker.

Hi,
Based on the device type in OUTPUT_OPTIONS in smartforms interface find out the printer name and write logic for printing appropriate LOGO in smartform.
Regards,
Raju.

Problem with printing logo in smartforms

Hi guys,
we have a logo in a window, its working fine in print preview, however when printing the document its all black. The logo does not display, instead the window is blackened.
Please advise.

Hi freishz ,
When u r sayin 'document its all black' do u mean that the background of image is appearing black or it is completely black nothing is displayed?
I had faced similar problem in smartform,where i was gettin grey background of the logo...
For this, you need to edit the logo image first. open the logo image in ms paintbrush and save it as 256 color bitmap image. now upload this bitmap in sap using tcode se78.
Now use this logo......

Problem with printing logo in smartform.

Hi guys,
We have a logo in a window, its working fine in print preview, however while printing the page data ,other than logo is comming fine on printout , but logo is not comming fine. Logo is comming like one black vertical strip on left side of page. Even if i used standard Logo like ENJOY , same problem is comming. Please please give solution.
Regards,
Pradip

Hello Pawar,
The the problem is with printer drivers thats what i think....Please ask you SAP Basis guys to work on it..Tell them logos are not printed correctly....Please do the config and install the driver for the same.
Regards,
Nabheet Madan

Dynamicaly print logo on smartform(if a person email id change logo ischang

hi expert,
actually i want all the variable of smartform in one table.
so i crated ztable,
my logo is in database i want to fetch the logo from z table .
(v_logo logo name in table how can i fetch logo from database with refrence of email id of person)
so plz suggest me step by step method.
i am working on hr module.
condition is if pernr (person)email id chang logo is also change both fields are in one table .

Hi
This is very simple, create all the logo's with the actual name of the person or perner.
Use a select query on your table and pass the value of the seleceted record as the name of the graphic in the smartform node.
Something like this:
MAPPING TABLE"
PERNER    IMAGE_NAME
0001           0001
0002           0002
in se78, you logo name should be '0001' , '0002' and so on....
in smartform, based on ur pernr, select a record from mapping table and pass the value of the image name to a variable in the graphics display node.
this should solve your prob.
Cheers
Ravish

Logo printing issue in Smartform

Hi,
I have uploaded company logo and i am using this logo in my Z*PO smart form, during printpreview it is showing correctly (the alignment and resolution), if i print that, the logo alignment is not proper, it is coming down than what i am aligned, the placement is perfect in printpreview.
Let me know, is there any other setting that i need to make.
Thanks,
Prasad S.

Hi friend,
I think there are lot of related post in SDN for this problem. Just search the forum before posting questions.
One of the similar post i have attached below.
Link : [Problem with printing logo in smartforms|Problem with printing logo in smartforms;
I think this will help you. If you still did not get the answer just search in Google by giving the key word "SAP + SDN + Smartforms + Logo printing problem". There are large of solutions to help you.
Thanks,
Sri Hari

Print Logo in Classic Report (Write Method,Not ALV)

Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.

Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand

How to upload a logo in smartforms

can anybody tell me how to upload logo in Smartorms

Hi,
Inserting Logo in SmartForm
Follow the given steps in order to add a logo,
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) User TCode SE78 to upload new pictures and logos.
or----
u can
Try executing program RSTXLDMC program. There also you can upload a graphic.
Run RSTXLDMC
Enter file name C:\MAIL\COMPLOGO.TIF
Resolution for Tiff file
Absolute X-position
Absolute Y-position
Absolute positioning
Reserved height
Shift to right
UOM = CM
Text title
Line width for text = 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Postscript scaling
Width & Height according to PS scaling
Number of Tiff gray levels (2,4,9) 2
Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Window type CONST
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally u can make use of the text name and text id to print the logo.
Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed !
Go thru this,
http://www.zebra.com/id/zebra/na/en/documentlibrary/misc/sap_smartforms_technical.File.tmp/SAPSmartFormsVersion3.pdf
Refer these threads,
How to upload logo in Smartforms.
logo insertion in smartform..
Regards,
Padmam.

Enter Logo in Smartform

Hi All,
Can anybody guide me to enter logo in Smartform.
I want to print one logo on inspection setup print program.
Please suggest me the steps to do the same.
Regards,
Deepak.

Hi,
Inserting Logo in SmartForm
Follow the given steps in order to add a logo,
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) User TCode SE78 to upload new pictures and logos.
or----
u can
Try executing program RSTXLDMC program. There also you can upload a graphic.
Run RSTXLDMC
Enter file name C:\MAIL\COMPLOGO.TIF
Resolution for Tiff file
Absolute X-position
Absolute Y-position
Absolute positioning
Reserved height
Shift to right
UOM = CM
Text title
Line width for text = 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Postscript scaling
Width & Height according to PS scaling
Number of Tiff gray levels (2,4,9) 2
Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Window type CONST
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally u can make use of the text name and text id to print the logo.
Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed !
Please reward points if useful.
Regards
rose

How to print logo when ever new customer arrises?

hi friends
i have range of customers . i have to print logo when ever new customer arrises . if the customer data continues in 2nd page i dont have to print logo. how to get it ?
regards
thiru

hi,
are you using smartform or script for printing ?
write the condition in program lines using the control commands ie on change of customer.
Take separete window for logo and print that in the first page so that if the customer data extend as to next page logo window will not appear in the next window.
and is there any table maintained for logos and customer details. if its maintained it would be easy to put the condition in the print program itself or else you can hadle it in the form.
Regards,
Prathima.

Label printing on ZEBRA printer TLP2844 with smartform

Hi Gurus,
Requirement:
Print label on Zebra printer with smartform
1. i have created a smartform with desired layout
2. and trying to print on Zebra printer
Questions:
1. smartform is not printing on zebra printer
2. suggest me if there are any ways to print smartform on zebra printer
3. does it requires any native programming language for printing labels on zebra printer
Best Regards,
Krishna

hi Krishna,
This printer does not support ZPL2 so I thnk you cnnot use the device types like LZEB2. It should work to print via windows and a device type like SAPWIN or SWINCF.
Regards,
Aidan

Using SSF_OPEN and SSF_CLOSE, is it possible to print the next smartform in the same page?

Hi Experts,
I'm using SSF_OPEN and SSF_CLOSE, to print multiple smartforms. In between SSF_OPEN and SSF_CLOSE, there is a loop at a smartform. The output prints each smartform in different pages. Is it possible to print the second smartform in the first page since there is still space for printing there?
Thanks in Advanced,
Jack

Hi Jack,
As per my knowledge,
you can't print two smartform in single page because smart form having own page-size.
If your layout page is A4 size then first layout print in A4 page and next layout will be go-to next print page. but if you have different kind of page size for both layout then you can control from printer side then that case both page will be printed in single print page.
Regards,
Prasenjit

How can i print logo in all the page

i've created a form(SAP script) which have five page.pls can anybody tell me how can i print logo in all the five page?

hi,
u can try this in
windows
change window type as CONST or MAIN.
cheers,
sam

How to print logo in standard report

Hi,
How to print a logo in sap ordinary report
Thanks,
Sreedhar

Hi Sreedhar,
It is not possible to print logo in the ordinary report, but it can done through ALV.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Rewards if it is helpful...
Regards,
Omkar.

How to print logo in printout using classical report.

Hello Friends,
By using below code i am displaying logo in output using Classical report.
What my problem is it is not displaying in print out.
Please help. or else tell me how to print logo in classical report as well as output print out.
DATA: docking TYPE REF TO cl_gui_docking_container,
      picture_control_1 TYPE REF TO cl_gui_picture,
      url(256) TYPE c ,
      query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
      html_table LIKE w3html OCCURS 1,
      return_code LIKE w3param-ret_code,
      content_type LIKE w3param-cont_type,
      content_length LIKE w3param-cont_len,
      pic_data LIKE w3mime OCCURS 0,
      pic_size TYPE i,
      repid LIKE sy-repid.
repid = sy-repid.
START-OF-SELECTION.
CREATE OBJECT picture_control_1
    EXPORTING
      parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
    EXPORTING
      border = 5.
CALL METHOD picture_control_1->set_display_mode
    EXPORTING
      display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
    EXPORTING
      height = 100
      left   = 700
      top    = 1
      width = 200.
"Position
IF url IS INITIAL.
    REFRESH query_table.
    query_table-name = '_OBJECT_ID'.
    " Logo Name
    query_table-value = 'ENJOYSAP_LOGO'.
    APPEND query_table.
    CALL FUNCTION 'WWW_GET_MIME_OBJECT'
      TABLES
        query_string        = query_table
        html                = html_table
        mime                = pic_data
      CHANGING
        return_code         = return_code
        content_type        = content_type
        content_length      = content_length
      EXCEPTIONS
        object_not_found    = 1
        parameter_not_found = 2
        OTHERS              = 3.
    CALL FUNCTION 'DP_CREATE_URL'
      EXPORTING
        type     = 'image'
        subtype = cndp_sap_tab_unknown
        size     = pic_size
        lifetime = cndp_lifetime_transaction
      TABLES
        data     = pic_data
      CHANGING
        url      = url
      EXCEPTIONS
        OTHERS   = 1.
ENDIF.
CALL METHOD picture_control_1->load_picture_from_url
    EXPORTING
      url = url.
WRITE : /'Classical Report Logo'.
Regards,
Phaneendra
Edited by: phaneendra punukollu on Dec 31, 2009 11:38 AM
Code Formatted by: Alvaro Tejada Galindo on Jan 4, 2010 4:52 PM

Hello Nidhi,
Thanks for your sugessition.
Actual we have data from IDOCS and it is maintained in Ztables
and need to dispaly in report ( Service centre - Warranty data ).
The report is completed. So again going to Script means waste of time for us.
So Plz help me if possible in Classical report.
Regards,
Phaneendra

Printing logo in smartform

Similar Messages

Maybe you are looking for