Printing Message

I have Windows XP. I updated to Adobe Reader 9.0 and now cannot print any pdf files. I uninstalled and then reinstalled 8.13 version. Still doesn't print. I never had a problem until I instated the 9.0. I keep getting the following message:
Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer.
I have uninstalled and reinstalled my printer too. I can print in Word and everything else but I cannot print pdf files.
Any help would be greatly appreciated. Thank you in advance.

It's simple, use a JSTL+Servlet approach as shown as following article:
http://avatar21.superihost.com/index.php?entry=entry070114-070222
here's how you do it in the JSTL:
<c:if test="${not empty sessionScope['messageQ']}">
<c:forEach var="customMessage" items="${sessionScope['messageQ']}">
  <c:out value="${customMessage}"/>
</c:forEach>
</c:if>Hope this help!
Regards,
Avatar Ng
Message was edited by:
Avatar_Ng

Similar Messages

  • Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

    My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction.  There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print.  I tried everythng listed in the troubleshooting section of the help guide in the software.  I uninstalled the printer and then reinstalled it which didn't help  in the slightest--the message about the print cartridge is still there.  I also tried unplugging the printer overnight (to try to clear the memory)  and this also did not help--that message is still there.  By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work.  I would appreciate any help from anyone to get my printer to  work again!

    Hi Cat2c,
    Welcome to the hp support forum,
    Thank you for your query.
    Please find steps to remove paper jam.
    Hope this helps
    I am a HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Thumbs up if my post helped you.

  • OfficeJet 6700 - "Unable to communicate with printer" message after install

    I am on a hybrid network with Windows 7, 64-bit. Printer is hard-wired to the router (ethernet) but laptops are wireless. Installation doesn't allow for a hybrid option, just wireless or wired, so I installed as wired.
    I just installed the OfficeJet 6700 - installed OK.  I also updated software/firmware during the install process.
    Windows' "Devices & Printers" recognizes the HP as being installed.
    Printer is able to produce the network configuration page, etc. so we know the printer is functional, but when I try to print I get an "Unable to communicate with printer" message.
    Windows' "Devices and Printers" troubleshooter thinks the driver is not installed, but as I mentioned, I just installed software from the CD.
    UPDATE: I was able to install & print without problems on my wife's Win7, 64-bit laptop. Something about mine seems to be the issue. Also, HP Print & Scan Doctor reports that everything checks out OK, but when I try to print a test page at the end of the good doctor's diagnosis, I am still "unable to communicate with printer."

    Sorry this is so long, but I tried to be through in my testing.
    Followed your suggested steps.
    I had previously set a static IP address, but just to be thorough, re-set it again with the same address.
    I unplugged the USB cord from the laptop.
    I began with the device labeled "HP OfficeJet 6700 (Copy 1)," which was set as the default printer.
    After entering the IP address & clicking Next, it searched the network and returned this message:
    Additional port information required
    The device could not be identified.
    The device is not found on the network. Be sure that:
    1. The device is turned on.
    The network is connected.
    The device is properly configured.
    The address on the previous page is correct. (re: the page where the IP address is entered)
    If you are sure the address is correct, select the device type below.
    I selected Standard (Generic Network Card) and clicked Next.
    Summary dialog appeared and I clicked Finish.
    Clicked OK/Apply.
    Attempted to print. Like before, it sent the file to print queue - then nothing.
    Right-clicked on the "Copy 1" device and selected Troubleshoot. Returned the message: Make printer "Fax HP OfficeJet 6700 the default printer" - even though this copy is already the default printer. (Usually when the original copy is set as the default, this copy is automatically re-named "Fax HP OfficeJet 6700.") I chose "Apply this fix."
    Summary page said "Troubleshooting has completed." I closed the troubleshooter and attempted to print. I closed the Devices & Printers window so it could refresh. Re-opened Devices & Printers. Now the default printer is named "Fax HP OfficeJet 6700." The other device is grayed out and is simply named "HP OfficeJet 6700."
    Attempted to print. (I'm testing w/ Notepad and .txt files)
    I have 3 choices in the Notepad's printer dialog box but only 2 devices showing in the Devices & Printers window:
    ~ "Fax HP OfficeJet 6700" - This is the default printer in the Devices and Printers window. I clicked on Print & rec'd an error message: "Send Fax - HP Officejet 6700. There is a problem communicating with the Printer. Check your USB connection & verify that the printer is ready." Notepad's print dialog box shows status as Offline. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is the printer that shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)." There is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. Notepad's print dialog box shows status as "Ready." In Devices & Printers, when I right-click on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing," 2 HP devices are listed - the one labeled "Copy 1" and the one labeled "Fax." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    I plugged in the USB cord again and re-ran the same series of tests.
    ~ "Fax HP OfficeJet 6700" - This is still the default printer in the Devices and Printers window. Notepad's print dialog box shows status as "Ready." The fax window opened, waiting me to enter the recipient's name, add a cover sheet, etc. I closed the fax window. The .txt file was in the print queue for the "Fax" device, so I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)." Again, there is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. This is one of 2 choices in the device labeled "Fax" - the default device. Notepad's print dialog box shows status as "Ready." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    Next, I used the printer's touch screen interface and turned the wireless connection off, leaving the USB cord plugged in.
    ~ "Fax HP OfficeJet 6700" - Status: Ready. The fax window opened, same as before. I closed the fax window & canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 - Status: Paused - Offline. I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This one shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
    ~ "HP OfficeJet 6700 (Copy 1)" - Status: Error. I clicked Apply, then Print. Again, this is one of 2 choices in the device labeled "Fax" - the default device. Like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
    Reconnected to the wireless network & verified that the IP address had not changed.
    Tried again to print using "HP OfficeJet 6700 (Copy 1)" - Status: Ready. I clicked Print and again, it sent the file to print queue - then nothing. This is still listed as one of 2 choices in the device labeled "Fax" - the default device." Like before, I canceled all documents in the print queue.
    Next, I right-clicked on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing" and selected the device labeled "HP OfficeJet 6700 (Copy 1)." In the print queue window, when I click on "Printer, one of my options is "Set as Default Printer." As soon as I did that, the device in the Devices & Printers window was renamed as "HP OfficeJet 6700 (Copy 1)" - no longer named "Fax." I tried to print again. Once again, file was sent to the print queue but never printed.

  • How to print message in oracle rdf report output?

    Hi,
    There is a requirement to print message in output of oracle rdf report. srw.message prints the message in log file but how to print message in output.
    Please suggest.
    Thanks & Regards,
    Sunita

    897745 wrote:
    Hi,
    We are trying to print BARCODE for Order Number in RDF report. Kindly let me know how to do this.It's very easy. Download a font which show barcode then choose your desire field's font that font. I use IDAutomationHC39M font.
    Hope this will help you.

  • Printing messages in Log File and Output File using Dbms_output.put_line

    Hi,
    I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
    Please let me know how can I achieve this.
    I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
    So let me know how I can achieve this functionality.
    Regards
    Sandy

    What is the requirement that doesn't allow you using fnd_file.put_line?
    Please see the following links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Printing messages in invoices and credit notes

    Hi Sap gurus,
    The printing messages in invoices and credit notes must be changed due to a new law.
    Does anybody know the transaction used for this, please?
    Regards,
    Roger

    Hi Roger
    You can change the forms by SE71 transaction. 
    thanks
    Ashok
    Assign points for useful answer

  • Printing messages through ODI procedure using Javashell bean

    I am new to this ODI procedure using Javashell bean.
    As i know some basics in Java ,i am trying this following code through ODI.
    I wanted to print messages using the code System.out.println("Welcome");
    But where we can see the output for this code in ODI?
    If any on knows ,kindly let me how do i can go about this?

    if you run an agent from the command line and you are executing your procedure using this agent then  the output will be reported in the dos/cmd window.

  • No data selected for printing  message no 8I000

    Dear All
    At the  time of printing J1INCHLN certificate getting error NO DATA SELECTED FOR PRINTING MESSAGE NO 8I000 , where we have data in vendor's A/C and TDS is deducted at vendor's A/C .
    Some vendor under the same section allow us to print the certificate, but the in case of few vendors we r
    facing the problem.
    As we need to send the same to vendors help is needed.
    VG.

    we sorted out the issue

  • Why did I get a "You Have Missed a Print" message with Condé Nast At Home?

    You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
    You can set your Condé Nast At Home application to automatically do the same thing every time you miss a print.
    Open the Condé Nast At Home application.
    Click the wrench icon () to open the Settings dialog.
    If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
    Click Save in the Settings dialog to save your changes.
    Did this answer your question? If it did, why not click the Kudos! button to the left?
    If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
    Or, click here to go back to the Guide to Printing Condé Nast At Home Scheduled Content.
    Condé Nast At Home (c) 2011 Condé Nast. All Rights Reserved.
    I work on HP's behalf.

    hi i'm a new user and i'd like to be able to print a PAST crossword from the Universal Crossword please know this is not a printing problem but i hope you will be able to help me find an archived crossword puzzle for April 24, 2012 Thank You!

  • Why did I get a "You Have Missed a Print" message with The Lorax Daily Print Activities?

    You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
    You can set The Lorax Daily Print Activities to automatically do the same thing every time you miss a print.
    Open The Lorax Daily Print Activities.
    Click the wrench icon () to open the Settings dialog.
    If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
    Click Save in the Settings dialog to save your changes.
    Did this answer your question? If it did, why not click the Kudos! button to the left?
    If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
    Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
    The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
    I work on HP's behalf.

    Can The Lorax Daily Print Activities be used on a MAC?  

  • Why did I get a "You Have Missed a Print" message with Daily Mail Printer Edition?

    You will miss a scheduled print if your computer is turned off or not connected to the Internet, or if you are logged out. When you see the “You have missed a print” message, you can click Print to print now, or Skip.
    You can set Daily Mail Printer Edition to automatically do the same thing every time you miss a print.
    Open Daily Mail Printer Edition.
    Click the wrench icon () to open theSettings dialog.
    If you want missed items to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you always want to skip missed items, select Never.
    Did this answer your question? If it did, why not click the Kudos! button to the left?
    If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
    Or click here to go back to the Guide to Printing Daily Mail Printer Edition Sections.
    I work on HP's behalf.

    hi i'm a new user and i'd like to be able to print a PAST crossword from the Universal Crossword please know this is not a printing problem but i hope you will be able to help me find an archived crossword puzzle for April 24, 2012 Thank You!

  • WLST redirect command does not log print messages

    I am using redirect to log WLST messages in a logfile, while my WLST Jython script is running. However, I am using the print command to output various messages, but I am finding that these print messages are not in the logfile.
    How do I get such messages in the "redirect logfile" ?

    Hi, I have a similar situation.
    I am exec the WLST code from within an application.
    When using the WLST scripting, and trying to use the "print" statement for logging messages, we can see the message on the console, but the messages do not show up in our logfile (using java.util.logging.Logger).
    For example, if my script has: print "test message"
    This will apppear on the console output, but not in my logfile.
    But other messages derived from the script are logged.
    For example, if in the WLST script we call startEdit(), then the message "Starting an edit session..." will appear in both the console and logfile as expected.
    Not sure why the print statement will not get directed to the logfile. Have tried both using statements in single quotes and double quotes, but it doesn't seem to make a difference.
    Any idea how we can log from WLST to ensure our logs capture all messages?
    I don't want to explicitly open the logfile as shown in your example, as its already open by the logger.

  • Safari won't print: "Error while printing" message

    Recently updated to Safari 6.2, on on 2012 Mac Pro, OSX 10.8.5. Tried to print a page from Amazon, and received "Error while printing" message. I then have to force quit Safari. I am able to print from Indesign, OpenOffice, and the same Amazon page from Chrome with no problem, so the problem seems to lie with Safari.
    I ran Disk Warrior, and rebuilt permissions, but the problem persists.
    I am reluctant to call Apple and be told that I have to reinstall system software, this seems related to my recent software update of Safari.
    Could use some suggestions here if anyone knows what the problem might be.

    It might be the Safari cache or cookies in Safari in you want to try ..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    No open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, try troubleshooting extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • Printing messages from my IPhone

    How does one print messages from the IPhone 4?

    To add to what Chris said. You can take a screen shot by pressing the home button and sleep/wake button at the same time. Then email that to yourself and then print from a PC or a Mac.
    Hope this helps!

  • Entourage: Show attachments in printed messages?

    Is there a way to make Entourage show that a printed message has an attachment? Mail does this (it shows a little paper clip and, at the bottom, shows the name of the attached file) but I cannot figure out how to make it happen in Entourage. It's important that my printed files reflect not only that I sent an email to so-and-so, but that I attached such-and-such a file.
    Ah, just use Mail, you say. Yes, but in Mail I cannot figure out how to automate the process of printing all incoming and outgoing messages. So I forget to print messages, which leaves my files incomplete.
    Each program gets me 90% of where I need to be. Would love to get that missing 10%.
    DXB Law

    Walter, thank you for the suggestion.
    Perhaps I am not explainging myself very well.
    In the Send Box new messages do not show the clip in the Attachments column. The image below is of two messaegs, both of which have an attachment, yet no clip is shown (this is also true of the Draft Box).
    In all other boxes, an attachment is shown with a clip (see below).
    I need the clips to be shown in all mail boxes.
    Thanks.
    Cheers, Blair

  • Printer message on computer says deleting print but will not clear screen and will nopt print

    my printer message says deleting for current print. but it will not clear screen and i cant print anything

    Hi @davecdavec6601,
    Welcome to the HP Forums!
    I understand that you cannot print, and I am happy to help!
    For further assistance, I will need to know some additional information:
    The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, Ethernet, or USB.
    If the printer is able to make copies.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    Hope to hear from you soon, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for