Printing multiple copies of multiple page booklet

I have a powerpoint slide that I converted into a PDF but instead of printing on the whole page I've done it 4up on a 8.5X11.  The only thing is that it prints pages 1 to 4 on one page.  Since I"m making like 200 copies it makes it difficult to sort and organize them.  I want to be able to cut and organized all at the same time.
So this is how I see it done unless someone here tells me otherwise:
I'm thinking page one (either 8.5x11 4up or 11x17 8 up) would be all page 1.
Page two would be all of page 2 and so forth all through all the pages.
Then the pages would repeat itself after the last page again.
The questions though is how do I set that up to do that?  Or is there a better way?  I could manually create the 4up or 8up layout for each page and print it that way but I would imagine that to be unnecessary and there must be a way.
Please help
Monty

Assuming you have Acrobat, this question belongs in the Acrobat forum. I suggest you look at quite imposting  from Quite software:  http://www.quite.com

Similar Messages

  • I am unable to print multiple copies on 1 page

    I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

    Hi,
    In order to print multiple documents on one page, you may follow the steps mentioned below:-
    Press Command+p- Select multiple pages or booklet
    If you are not getting these options, please send us a screenshot to better understand the issue.
    Regards,
    Nakul

  • How do I print multiple copies of a page in a PDF File?

    How do I print multiple copies of a page in a PDF File?  For some reason I tell it to print, for example, 3 or 4 copies of a certain page and it will only print one copy!!!

    OS X 10.9.5Adobe Reader 11.0.10
    I increase the number of copies to 3, 4, or 5 (etc.) but it would still only print one copy of the designated page/pages.
          From: pwillener <[email protected]>
    To: Caren Harris <[email protected]>
    Sent: Friday, March 6, 2015 9:17 PM
    Subject:  How do I print multiple copies of a page in a PDF File?
    How do I print multiple copies of a page in a PDF File?
    created by pwillener in Adobe Reader - View the full discussionOperating system?  Reader version? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262032#7262032 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262032#7262032 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Printing multiple copies of 3 page BOL in Duplex mode-

    Hi Gurus!
    I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
    At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then  again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
    Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
    Please suggest.

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • Problems printing multiple copies on 1 page in iPhoto version 9.5.1

    I'm having problems printing multiple copies of a photo in my version of iPhoto 9.5.1. I've tried looking at the answers given in Macworld forums for iPhoto '09 but I can't follow them as they refer to clicking 'preferences' - but this button isn't displayed on the 'print' page. Is my version iPhoto '09 or '11?

    iPhoto 9.5.1 is the most recent version of iPhoto '11, as part of the iLife '11 suit of applications.  The printing dialog changed between iPhoto '09 and iPhoto '11.
    The easiest way to print multiple copies of the same photo on one page is to simply duplicate your photo (from the "Photos" menu:  "Photos > Duplicate" and then to select all copies at once and use "File > Print":
    Then select a template and press the "Print" button.

  • Duplex printing of multiple copies of single page

    I really like that the settings for printing are retained so you can leave it set to duplex rather than having to select it each time. Although I do get caught with not resetting the number of copies on occasion. I do a lot of printing and like to conserve paper.
    The problem is when duplex is set and I print multiple copies of a single page, it prints on both sides of the paper. When printing two copies I get one page printed on two sides instead of two pages printed on one side.
    I know the easy answer is reset the duplex setting. But it should print correctly regardless. Has anyone had this problem and found how to deal with it other than resetting duplex?

    If these settings are in the printer driver (which they most likely are) then you'd have to contact the driver manufacturer. Perhaps there are multiple "double-sided" settings. For instance, if there is "duplex" as one option and "two-sided" as another option in the driver, then perhaps one indicates all copies will be printed double-sided even on the same page (as you're experiencing), whereas the other would print multiple two-sided copies. This, however, is very driver-dependent behavior. I'd recommend checking to see if there's an update available for your printer driver that might either clear the problem or provide a clearer option setting for the print jobs.

  • Laserjet 4000n keeps printing (multiple) copies of first page

    My LaserJet 4000n model C4118A serial no. nlqwo15293 manufactered Feb 16 1999 is conected to home LAN (bt Home Hub 5)
    If I print a copy of the menu map using the buttons on the control panel I get muliple copies.
    If I try to print 1 copy of a 2 page document I get multiple copies of the first page
    I'm running Windows Vista Home Premium
    Suggestions please 
    is the printer unrepairable?

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

  • Can't print multiple copies of saddle stitched booklet

    We purchased a Canon Image Runner Advanced C5235 copier/printer last March, with a booklet maker. When printing from InDesign CS6, I can print one booklet, folded and stapled. However, as soon as I select more than one copy, it won't fold and staple the pages. I'm using a Mac with OS-X 10.9.5. I've had lengthy discussions with Canon tech support and had a technician in to look at it, and we've determined that the issue is exclusive to InDesign. I can print multiple booklets from Word and Adobe Pro, and by copying letter-sized pages on the Canon rather than printing from the computer. Has anyone else experienced this? Why would I be able to print one booklet, but not two or more? I know the work around could be to export from INDD to PDF, but when I do that, it automatically shrinks the content and centres it on each page of the booklet, resulting in tiny font and a lot of wasted space on the perimeter of each page, which is not acceptable for my finished product.

    mytmo777 wrote:
    I know the work around could be to export from INDD to PDF, but when I do that, it automatically shrinks the content and centres it on each page of the booklet, resulting in tiny font and a lot of wasted space on the perimeter of each page, which is not acceptable for my finished product.
    There is a Page Scaling setting in both Acrobat and Reader that many people overlook that could be why your pages are shrinking.
    If it has defaulted to Fit to Printable Area, try setting it to None. You may still only get one booklet at a time, but there are a few things about printing directly from InDesign that people find doesn't work as well as it should. Exporting to PDF is one of the things that usually gets you out of problems.

  • Print out multiple copies for next page in sapscript

    Hi All,
              For  check printing the client wants the next page with item data to be printed out twice, while the first page along with the check will be printed out on a pre-printed paper. Can anyone advice me on this.

    hi,
    IF &PAGE& EQ 1
      "do write what all you need to print in First page
    ELSE
      "write what all necessary you want to print from second page onwards..By this first page will not print in Second Page
    ENDIF.
    IF &NEXTPAGE& EQ 0
      "This Means it is last Page write footer or any comments in Last Page
    ENDIF.
    Prabhudas

  • Multiple Copies of Same Page Content from Various Trays

    I use 'gs' to create postscript, and 'setpagedevice' to specify trays.
    I print a single page of content (say the file "f.pdf") on each of six different colors of paper, which are pulled from different trays.   At the moment, I do this by repeating the filename "f.pdf" six times as an arg to 'gs'.  This creates a single postscript file, into which I insert my six 'setpagedevice' commands.
    My 65ppm printer has to re-render the same 'f.dpf' postscript six times, which causes it to only produce about 20ppm.
    Is there a way to pass a NumCopies specification so that each of my 'setpagedevice' commands switches trays to print the exact same rasterized bitmap? In other words, to write a postscript file that rasterizes 'f.pdf' only once, and still makes use of that cached image for each 'setpagedevice'?
    I'm happy to read manuals, but I don't know what technique or feature name(s) I should look for...
    thank you,
    - Randy

    Randy,
    If your original one page ps or eps file was e.g.
    72 720 moveto
    /Helvetica 72 selectfont
    (Hello World) show
    showpage
    Then you can try something like this:
    /MyPage
        72 720 moveto
        /Helvetica 72 selectfont
        (Hello World) show
        showpage
    } def
    and then in paint procedure in the form:
    /PaintProc
        MyPage
    Use setpagedevice to select your tray instead of a page size like in the prior post's example before calling the form. Since the form is the same on each
    page hopefully it will be stored in the form cache and speed things up but you may need to check the cache size.
    Ed

  • Create multiple copies with multiple develop settings in one keystroke (like PS action)?

    Hi,
    I'm trying to move over from PS to LR in my tourist photo studio (it's easier to train employees, it's more intuitive, it's cheaper, etc.). However, there is one element missing that I simply can't do without. We're located in a theme park and we handle A LOT of people in a day so we're are a very fast paced studio, I like to call it fast food photography. Customers come in, have their photos taken, pick them out immediately and get prints right away (hopefully all in less than half an hour). I've always used Photoshop actions to make everything very fast and efficient (afterall, the less time we spend tinkering on a computer the more time we can spend interacting with our guests). As of now, customers get to pick the finish of their photo so I have an action that creates four layers, each with a different effect (b&w, antique, desaturated, full color). We then can click the layers on and off to show the customer what each finish looks like. I've been trying to replicate this in LR without any luck. The best I can figure out is to use virtual copies and create a preset for each effect. However, we simply don't have the time to click "create virtual copy" three times in succession then select each one and apply a different preset to create the four effects for one image. Esepcially since each customer usually buys multiple images we'd have to do that many times for just one sitting. It seems simple in theory, but the amount of time it takes to create 3-18+ virtual copies each with different presets applied adds up drastically. Clicking a function key for each image is an amazing time saver. The focus of our business is very customer oriented, and we've tried our best to create a workflow where we face our guests more than we face our computer monitors. If anyone knows of anyway to accomplish what I described in PS in an equally efficient manner in LR that would be wonderful. Perhaps there's a tactic I haven't thought of yet.

    What you describe cannot be done directly in Lr, i.e. there is - unfortunately - no way to create multiple Virtual Copies (VC) with one command.
    But in Lr you don't need multiple VCs. If you have created presets for each "look" you can just apply one "look", i.e one preset after the other the one-and-the-same VC. And you can apply the "looks" i.e. presets in any order and go back-and-forth numerous times. Since the Lr edits are not pixel edits but parametric (only a set of data in the Lr database = catalog), there is no harm done if you apply the same set of presets numerous times in various order. In Photoshop you would switch layers on and off (maybe you use layer comps), in Lr you would switch from one preset to the other for the same VC - or even for the original.
    And, you can always go back to the original state the photo was in when it was imported.
    If the customer likes one preset, just switch over to the Print Module, apply your Print Preset and print. If the customer likes three presets, go back to the Develop Module click on the other preset, go back to the Print Module ... go back to the Develop Module, click on the third preset .... etc.
    PS: I bet Lr could be even faster than Photoshop
    Message was edited by: web-weaver: PS added

  • Auto email multiple copies to multiple user as per filter

    Hello all ,
    I am developed a report 
    as below
    Auto email status report to particular Heads if store proc returns data for him .
    I can make a copy of report for one head using his division filter and user_id
    and if store proc returns data for him so email to him ..
    same thing for multiple users with same store proc can return the data and email
    but i dont getting how can i do this...?
    Please (Visakh 16) and others  help on this
    Dilip Patil..

    Hi,
    I think you should create one Delivery Profile, with multiple Email Devices. Within the Delivery Profile you should add all the Email Devices you want to use.
    If this Delivery Profile is active, you can add Active Devily Profile as the User Destination on the Destination page of the iBot.
    Otherwise you can check if it works when you select 'Email' as the Specific Device.
    Regards,
    Stijn

  • Laserjet 1020 Won't Print Multiple Copies

    I have a Laserjet 1020.  OS is Windows 7, 64x.  If I give a command to print any document multiple times, it will only print it once.  So, if the document is 1 page and I need 5 copies, it will print that one page one time.  If the document is 4 pages and I need 5 copies, it will print the four pages of the document, but only once.  So, the issue is with multiple *copies*, not multiple *pages*.  I have tried the simple stuff (turning the computer on and off; checking for updates; removing the printer and completely reinstalling it; etc.).  Nothing works.  I did see elsewhere somebody say that if you go to start; devices/printers; right click printer; and hit DEVICE SETTINGS tab, then you can change this "MOPIER" mode thing.  But that is the problem... THERE IS NO DEVICE SETTINGS TAB.  No, I am not crazy.  It isn't there.   So, the problem with that fix, which appeared to work for others in the HP Forum, won't work for me because there is NO DEVICE SETTINGS TAB.  So... How do I fix this?  Why don't I have a device settings tab?  Help!  :-)  

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Print Multiple copies of report, and resetting Page number for each copy.

    Dear frnds!
    i am using developer 6i reports i have a problem.
    i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
    1 - for user copy
    2- gate copy
    3- accounts office
    4- office copy
    any body please tell me the solution "i am using oracle 9i and developer 6i"
    Thanx
    Ibrar

    Hi,
    I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
    <?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
    HEADER
    PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
    PSN Detail: <?$G1/PickSlipNumber_ID260?>
    Page 1 of 3
    <?start:body?>
    BODY
    <?$G1/LineNumber_ID6?>
    <?end body?>
    FOOTER
    <?end for-each?>
    <?end for-each-group?>
    XML:
    <R5542520>
    <Pick_Slips_Detail_Lines_S24>
    <Header_Custom_Section_S24>
    <Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
    <PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Maybe you are looking for

  • Incorrect Number of Pages Printing - Custom Paper Size

    Hello Everyone, I am new to Crystal Reports but have recently become responsible for supporting a report that my office has been using for several years.  We utilize a fairly simple Crystal Report to create temporary and guest parking passes in the p

  • How to run business services as dynamically generated Subject?

    Hi experts, I have configured a business service which puts a message on a JMS queue in a weblogic container other than ALSB's weblogic container.The queue is configured with a security policy [say a 'MessagePublisher' role], so that only users with

  • Version Control in RoboHelp 9: Changing projects

    I am using Robohelp version 9. We had originally set up the internal Version Control to point to a particular project in our Team Forge. Now we have a new project that we need to point to and we cannot figure out how to change the location of where w

  • New document type--printing PO

    Hi, I created new doc types and I noticed that the POs created under the new doc types did not displayed anything in the Messages (printing).  Do I have to configure the output control? if yes, how? thanks so much!

  • Need to prepare an ABAP report!

    Hi MM Experts, I need to prepare an ABAP report on the following descriptions:- "Develop an MRP report that calculates the unrestricted stock, purchase order quantity, production order quantity, delivery quantity, planning order quantity on the basis