Printing multiple designs, but printing thumbnail size

I am trying to print multiple of same design on same page, but for some reason it is printing thumbnail size. Does anyone know why?

OK. Let's figure out what you've done incorrectly.
First, what is the page size in Document Setup, and waht is the size of the paper on which you want to print?
Can you show me a screen shot of your page in InDesign? You can use the camera icon on the web page to embed an image in your post, like this:

Similar Messages

My windows 7 pc recognizes my hp printer through airport but prints only various letters and symbols

my windows 7 pc recognizes my hp printer through airport but prints only various letters and symbols

Located a solution:
Go to Control Panel - Printers --- right click the printer and select Printer Properties.
Select the PORTS tab and disable Bi-Directional Printer Support. Seems to work whether the printer is installed either via USB or Cat5 to the Airport Extreme network.
For HP printers, if that first fix doesn't work, download and install the HP Install Network Printer Wizard - allow it to replace your 'newer' driver, but check hp.com for step by step instructions.
Third suggested fix is to download a PCL6 driver, or a different model-driver altogether that is more generic than model specific.

How do I print multiple items of a specific size on one sheet of A4 using photoshop elements 12?

HI
I have a small sublimation business whereby I print photo's onto small personalised gifts such as mugs, phone covers fridge magnets. I print out the images to fit the size of the gift i.e. a phone cover or mug the images are a specific size.
Often I want to print multiple items onto one page each with a customised size as the paper is expensive and I need to make the most of every sheet. I can't figure out how to do this in photoshop elements 12 can anyone help / advise?I am using windows XP
Thanks Lynsey

You have a much better chance to get a useful reply if you ask in the Photoshop Elements forum.

Can't "Print multiple files" or "Print bin files"

I had PSE6 installed on my 'old' PC and never had any problems. Then I had my PC upgraded and now I can't print multiple files from the editor or organiser. The photos appear but have a red circle-like icon in the top-left of the thumbnail.
I can print single photos from the editor. I have updated my printer driver with no change. The printer works fine from other applications.
I know this is possibly not a PSE6 problem, but would appreciate any light that can be shed on fixing this problem.
I am running on XP Pro (was on SP2 before but new system has been installed with SP3)
Thanks in advance.
Leonie

Barbara,
Thanks for replying! I am using a Mac (OS 10.5 and Photoshop Elements 6)
I went to one of Adobe's help pages and tried to follow the instructions below so that I could print multiple photos on one sheet. However, I cannot find any "Organizer" or "Editor Print" dialog box in my Photoshop Elements software. Plus, I do not know what "Photo Browser" or "Date view" are. And the "Remove" button does not seem to be available.
The guide appears to be of no help, and I am currently lost. Are the directions below not for a Mac? Is there a book I should buy for Mac?
Bruce
Print multiple photos
You can print multiple photos using the Print dialog box in the Organizer. You can access this dialog box from the Editor Print dialog box.
1. Do one of the following to open the Print Selected Photos or Print Photos dialog box:
In the Photo Browser or Date view, select one or more photos, and choose File > Print.
In Full Edit, Quick Fix, Guided Edit, or any other workspace mode, open the photos you want to print and choose File > Print Multiple Photos.
2. To add more photos, click the Add button .
3. To remove a photo from the print list, select its thumbnail and click the Remove button .
4. Choose Individual Prints from the Select Type Of Print menu.
5. Choose a print size for each photo from the Select Print Size And Options menu. Click the forward and back buttons to see each page of the print job.

HT4356 Why is printer not print from pc but prints from ipad?

PRinter will print from iPad but not from pc why? Printer 8600 plus

Reboot your router. Make sure your PC is on when you reboot the router.

1102w gives print error msg, but prints

I had an hp p1102w for quite some time and it perfectly fits our needs on our home wifi network. One of the features I use on a regular basis is printing double sided. About two months ago I started to get an error message "HP P1102 could not print (document name)", but the document printed just fine. I didn't really worry about it until I tried to print double sided. Now the printer prints the even numbered sides, but I never get message to turn the paper and press continue. The printer and computer just sit there looking at each other and nothing happens. If I press the 'X' button the error message immediately pops up on the computer and the rest of the job is lost on the printer. I downloaded and installed the HP drivers, the HP printer doctor software, searched the forum for suggestions, tried a few suggestions that sounded vaguely like my problem, turned the firewall off and back on, and finally concluded that the printer was bad. So I bought another one. I get the same problem, tried the same remedies, and still am getting the error msg.
My conclusion is that there is a communication problem between the two devices that has probably been caused by some windows update at some point. Anybody got any bright ideas?
Peace,
V
This question was solved.
View Solution.

Hi vneathery ,
Thanks for letting me know you were able to print two-sided by opening and closing the lid. But still the issue exists.
Most likely to resolve this issue, we would have to rip everything out for the printer in the registry and do a fresh install to fix this problem.
I can send you that information in a private message and you can decide whether to continue with more steps.
In the forum beside your handle name just click on the envelope to view it.
You can always restore your computer back to a earlier time when everything was working properly, but you mentioned this issue started 2 months ago. How to refresh, reset, or restore your PC on Windows 8.
How is the printer connected?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro not printing for me, but printing for my coworkers

My office just got an Officejet Pro 8630 and I have been installing them onto our laptops. I have installed the drivers on four computers, and it has worked well for three of them (all but mine). Our office is doing wireless printing, and the printer is attached to the network. My computer is connected to the network as well. I did everything the same (to my knowledge) for the downloading, so I am very confused. I was able to scan from the printer to my computer in PDF form. I restarted my computer and also uninstalled/reinstalled everything but to no avail. When I try to print, it goes into the printing documents queue, waits there for a few seconds, and then goes away as if it had printed properly. Printing to our old printer still works for me (also wireless, but an Epson) but of course we will be getting rid of that soon. Am I missing something?

Hi , I see that you are having issues printing from just the one computer, but you can scan from the printer to the computer. I will certainly do my best to help you. Download and run the Print and Scan Doctor, it will diagnose the issue and might automatically resolve it. If the issue persists, try the steps in this document to see if it will help. Wireless Printer Prints a Partial Page or Fails to Print All Pages in Windows 8. The Microsoft hotfix KB3000461 should help with this issue. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages) If you appreciate my efforts, please click the 'Thumbs up' button below.If there is anything else I can help you with, just let me know. Thank You.

Prints on Windows connected printer...but printer keeps saying "Printing"

I have an HP PSC Photosmart 2401 connected to my XP computer, which is wirelessly networked to my iMac. I just finally got the printing to work (it was very hard to find a helpful site that told me to install the component in Windows allowing printing from UNIX machines), and it's working fine, except for one thing. My print jobs print fine now, but then the printer screen continues to say "Printing..." after the job is complete, and I have to hit cancel.

Hi Rebecca,
Please check which ppd file have you used to configure the new printer.
You can use the recommended ppd file to configure your printer(HP LJ 2015). You can download the post script ppd from :
http://openprinting.org/show_printer.cgi?recnum=HP-LaserJet_P2015
Please let us know if this does not resolve your problem.
Regards,
Rishi

Smart Web Printing & blank print preview window but prints anyway

I can successfully print using Smart Web Printing on my W7 laptop. My Deskjet F380 is set up to always display a print preview before printing but when I use Smart Web Printing the print preview is always blank but it still prints correctly. I have no problems with the print preview from IE8. Has anyone else encountered this problem?
This question was solved.
View Solution.

this problem has now resolved itself - I think since the latest HP update.

Pages don't print in Netscape but print in IE

I am having the strangest problem I have ever seen. We are running WebLogic
          Commerce 2.0.1 on NT. We have two JSP's that show items in an online
          catalog. The pages take a single category ID to determine what category to
          view and displays it. Everything looks fine on screen. The problem is that
          when you want to print a page in Netscape you get blank pages under Win
          95/98 and Mac OS and Win 2k will tell you that there are no pages to print.
          The pages are being cached and if take the JSP and save it as an HTML file,
          put it back up on the server, view it with Netscape and print it, it then
          prints. It's happening with Netscape 4.05,4.72 on the Mac and 4.08,4.51 &
          4.76 on Windows. I am completely baffled by this one and any thoughts would
          be GREATLY apriciated since the client won't go live without it being able
          to print in Netscape.
          Ryan-
          //-- Ryan J. McDonough
          //-- Senior Consultant
          //-- Type T
          //-- http://www.typetzone.com
          //-- 617-927-7255


Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

Bonjour Printer installs OK but prints garbage symbols

I have installed Bonjour 1.0.4 on a fresh installation of Windows XP SP2. It installed fine and bonjour already had my printer in its list of drivers (HP DeskJet 815c), so set up was easy (I have my printer plugged into an airport express which my windows machine connects to over the LAN).
My mother's iMac printed to the printer fine over the LAN.
The Windows machine printed garbage instead of a nice simple A4 page of black & white. It prints garbage symbols, one or two lines a page and was going to go for many pages instead of just one.
I never restarted after installing either Bonjour or the printer but I wasn't prompted to.
Any suggestions on what I might do? Would the generic printer drivers be worth a go?

Hi
Try the drivers from the link below on the windows 8.1 unit
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=4204...
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Print multiple forms between FP_JOB_OPEN and FP_JOB_CLOSE

I am aware, that there are questions regarding "Printing Multiple forms", but I didn't find answers there.
Still my system is not working as expected:
1. FP_JOB_OPEN is called
2. the generated Adobe Forms function is called multiple times
3. FP_JOB_CLOSE is called
This program doesn't deliver all the pages, but just the first call. How shall I solve this problem?
(Coding should work anywhere with copy-pase.)
data: fm_name           type rs38l_fnam,
      fp_docparams      type sfpdocparams,
      fp_outputparams   type sfpoutputparams.
parameters: p_fpname type fpname default 'FP_TEST_02'.
* Get the name of the generated function module
call function 'FP_FUNCTION_MODULE_NAME'
exporting
    i_name     = p_fpname
importing
    e_funcname = fm_name.
* Sets the output parameters and opens the spool job
call function 'FP_JOB_OPEN'
changing
    ie_outputparams = fp_outputparams
exceptions
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    others          = 5.
* Call the generated function module
call function fm_name.
* SECOND CALL ****************************
call function fm_name.
* Close the spool job
call function 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.

Hi ZSOLT,
In order to call the form multiple times please do the following,
1) Just before your FP_JOB_OPEN you need to pass the output parameters (good practice). You can also set other parameters as well (for example nodialog, preview, copies., etc)
CLEAR fp_outputparams.
fp_outputparams-dest = 'PDF1'.      "Default pdf printer
fp_outputparams-reqnew = 'X'.       "New spool request
Now call your FM FP_JOB_OPEN with the above output parameters.
2) Usually this step is processed in a loop. (getting your interface data into a internal table and then looping at it)
But here I am enhancing your example code.
In order to trigger the form multiple times you need to change some input data to the form (for example I have changed date and time below in the prepare test data sections) so that the call function fm_name gets regenerated every time there is new data
data l_datatypes       type sfpdatatypes.
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20040613'.
l_datatypes-time = '100600'.
l_datatypes-lang = sy-langu.
FIRST CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20100913'.                 "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-time = '10700'.                        "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-lang = sy-langu.
SECOND CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
Close the spool job
call function 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.
I have tested the above code and I am getting multiple forms.
Please try on your end and let me know if it works.
Thanks
Raj

From design to print

I've been working with an 11x17 spread booklet layout within InDesign (brochure) and may be stuck in a bad habit. The majority of my work lately has been starting with RAW photography (after edits) saved as 300dpi hi-res psd files & placed in my spreads in ID (example: http://www.lifecareassurance.com/images/nov07.jpg . Well 6 pages of that & I'm looking at a 11,753mb pdf. The prints look perfect but the file size seems a bit high to me. I save as PSD PDF with standard compression with expert color for a high quality print on a 600dpi Canon image runner (C5180). As a test, I reduced the DPI of my images from 300 to 72 in PS leaving the actual dimensions the same. I don't see an obvious difference in quality within ID even in medium res view but, am I in-fact loosing quality by doing that? If so any suggestions for minimizing file size without compromising the quality. I have no problem with room on my server but, after 6 pages things slow down quite a bit.
Thanks!

Right, Well not only laser but full color professional printing as well. I realize that I can test via loop or visually to see differences, what i'm wondering is, there any definite proven loss of quality in clarity or color wise OR preferred method of prepping hi res images for placement in ID... All my graphics are linked of course. Placing them.. links them. I understand that having my view set as hi quality is an issue but it's not negotiable. Cropping un-used portions is another approach I've tried.. Sorry for the mis categorized topic. I swear I was in ID when I posted. Now I'm unable to delete or change category (or am I?)
Thanks for your time guys!

Printing multiple photos per page ?

in Canon easi print you can select many photos and/ or many copies of the photo and select how many per page. for example : 2 x photo A, 3 x B, C, D & E ; 8 photos total on 2 x A4 sheets. or you could select 8 on 1 page, or 2 on 4 pages...
Does Mac have same functionality...I can't find it in i photo....
canon easi print does not have i mac version.....sadly
is there any other software available which has similar ease of use ?

You can print multiple photos of te same size on a page easily
select the photos and print, select the printer, paper size and print size (do to math to be sure they fit) and if the previews does not show multiple photos then click customize and colcik on settings - select multiple photos per page and teh preview will reflect youur choice - click print and make any printer specific selections and pting
LN

Printing multiple designs, but printing thumbnail size

Similar Messages

Maybe you are looking for