Printing multiple queries.

Is it possible to print multiple queries on a web template through one print button? Has any one been able to do this? The queries may or may not be from the same infoprovider. Thanks!

Check if this can help you:
Enhance web printing: multiple data providers!?
Regards

Similar Messages

  • Printing multiple queries data

    I am calling a report A from report B. Report A has multiple queries that are not linked. When I run report A directly it prints the data from both the queries just fine. However, when I call it from report B, it is only printing data for the 2nd query. Any ideas why this is happening?
    thanks

    Check if this can help you:
    Enhance web printing: multiple data providers!?
    Regards

  • Printing on Web - web template with multiple queries

    Hi.
    Trying to print to PDF from the Web, when I have more than 1 query in the web template, using Tabs.
    When the report has been run, if I select the tab for report A and then Print, I need report A to be printed. Similarly, if I have selected the tab for report B I expect report B to be printed.
    Is this possible without resorting to HTML coding direct? If so, can you tell me how, please? I have no problem printing single queries, the issue is how to print different reports without having several Print buttons. If it CAN only be done by HTML coding, could you send me some sample code please?
    As well as offering points for useful answers, I can also offer my Word document where I have broken 0ANALYSIS_PATTERN in to its components, with screenshots... I have found it invaluable.
    Thanks,
    Patrick

    The answer was to use the Tabstrip web item... although I still have to define a set of buttons for each tab, only one set is visible at a time, which is fine

  • Multiple queries in reports with XSL-FO and without BI Publisher

    Hello,
    I'm trying to find out how to create a complex report in APEX for printing. The report contains multiple queries in different layout, images and static text.
    I don't have the possibility to use BI Publisher and I'm not an XSL-FO expert. However I'm trying to find out if it's possible at all not using BI Publisher.
    I'm having the impression that multiple report queries and layouts in APEX can only be used in combination with BI Publisher. I'd be glad if someone could give me an example of how to do multiple queries and layout in a single report only using XSL-FO.
    Thanks in advance,
    Jan Willem

    Hello,
    I'm trying to find out how to create a complex report in APEX for printing. The report contains multiple queries in different layout, images and static text.
    I don't have the possibility to use BI Publisher and I'm not an XSL-FO expert. However I'm trying to find out if it's possible at all not using BI Publisher.
    I'm having the impression that multiple report queries and layouts in APEX can only be used in combination with BI Publisher. I'd be glad if someone could give me an example of how to do multiple queries and layout in a single report only using XSL-FO.
    Thanks in advance,
    Jan Willem

  • Print multiple sections in report

    How do I print multiple sections in a report?
    For example, if I have 5 select statements in my data section and want to print them seperately, one after the other, how would I do that?
    I do not want to merge the data together. I want it to be like 5 reports concatenated together.
    Query1 Title
    Query1Results
    Query2 Title
    Query2Results
    ... etc ...

    What you need to do is create a new main frame for each query. The easy way that use to do this is create the section of the report and let the wizard create the frames for me. Then I move them around to make the section look the way I want it to. Then I open a new report. This one I'll build it using the second query. Then again use the wizard to setup the frames. Then you'll select the main frame from the second report using the frame selet button copy it and paste the layout into the first report. You will want to paste it under the first section. A little trick here is to first draw a small line right above where you want the second section. The paste the second section. This will make sure the the second section is close to where you want it. If you do not do this Reports will put it on top of the first section a lot of times. You'll have to recreate the data model again, but that is easier then setting up all the framing on a complex layout. Then repete the second report step until you have done all the queries or sections you want.
    I hope that helps,
    Tom

  • Insert multiple queries using either WORKBOOK, WAD or Report Designer

    Hello Guys
    I have a task where I have to insert multiple queries into one single page/sheet & print it out later. For this I can use any one of the tools available: Workbook, WAD or Report Designer.
    1. Workbook - Here I have read that we can use a call back MACRO and some other features.
    2. WAD - Here I have read that we can use: 1. Multiple data providers (one for each query) & 2. Multiple web analysis items linking to each individual data provider.
    3. Report Designer - Since this is the actual 'formatting' tool provided by SAP, I am assuming that this is the right environment to achieve my task.
    My question: Which one out of the above 3 tools is actually feasible? Can someone explain me in detail about how to go about this task. Any 'How to..' docs from SAP would also be most helpful.
    Regards.

    Hi Kashyap,
    I have done similar requirement in Workbook,it has better features and more user friendly than others......it depends on the individual...but U cna meet your requirement thru Workbooks...
    If the Req are complicated then we go for MAcros ,where in we can satify the critical req,say some sort of Dynamic reqs.
    There are lot of threads on Multiple queries in one Workbook....Just search in SDN and u will get lot of Threads on this topic.
    Come bak if u have any other doubts.
    Rgds
    SVU123

  • Multiple Queries in Workbook - Refresh Screen Shows Up for Every Query

    We have multiple queries in a workbook.  All of these queries have the exact same selections for the variable selection screen.  When all the queries are refreshed once, the selection screen used to show up once and all the queries are refreshed with the same selections.  
    We were on BI 7.0 and SP10.  We recently moved to SP12.  Since the SP12 installation, the multiple query refresh pops-up the selection screen for every query.  It is nothing like "multiple query refresh" at once since the user has to click "execute" button for every single query.  It is interesting to note that the selection screen only contains hierarchy variables and hierarchy node variables.  The other variables of selection screen do not show up.  I couldn't find any OSS note on this topic.  Please let me know if anyone has any comments on this issue.  I will assign points to useful posts.

    hi Sameer,
    try to update front end patch to latest version ?
    Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
    hope this helps.

  • Unable to print multiple line items in Z-SAP SCRIPT

    Hi ALL,
    We have a scenario where in we are calling the Driver program (RFKORD50) for Document Extract(F.64), Where in we have attached the Z-Script to the program(RFKORD50),
    Unable to print multiple items.
    1) Checked with all the elements in STD program for printing multiple items in main window but unable to get all the items we are able to fetch only 1 item .
    (&BSEG-BUZEI&,,     &BSEG-SGTXT&,,,,&BSEG-DMBTR&)
    2) I have also tried with external subroutine but it also didnot work.it is fetching the latest value.
    Ex: if we have 3 items say 1,2,3 first 2 items are not getting fetched it is taking 3rd item and printing it straight away(Problem is it is not going to script for fetching the first item).
    see the perform which i have used
    /: PERFORM ITEMS IN PROGRAM ZTFI_ZNV20296
    /:USING &BSEG-BUKRS&
    /:USING &BKPF-BELNR&
    /:USING &BSEG-GJAHR&
    /:CHANGING &V_BUZEI&
    /:CHANGING &V_SGTXT&
    /:CHANGING &V_DMBTR&
    /: ENDPERFORM
    IL  &V_BUZEI&,,     &V_SGTXT&,,,,&V_DMBTR&
    Please suggest me whetther we can call write_form from external subroutine. or is there any loop commands in SAP SCRIPT Form.
    Regards,
    Jana

    Hi!
    The LOOP is always within the printer program. In this case also.
    Just check out the RFKORI35 include, the LOOP begins in the 215th line (in 4.6C).
    SORT HBSEG BY BUKRS SORTP1 SORTP2 SORTP3 SORTP4 SORTP5
                          BELNR GJAHR BUZEI.
            LOOP AT HBSEG.
    *         WHERE BUKRS = SAVE_BUKRS.
              SAVE_BUKRS  = HBSEG-BUKRS.
              IF  ( HBSEG-KUNNR = SAVE_KUNNR
              AND   NOT SAVE_KUNNR IS INITIAL )
              OR  ( HBSEG-LIFNR = SAVE_LIFNR
              AND   NOT SAVE_LIFNR IS INITIAL ).
                CLEAR RF140-ELEMENT.
                RF140-ELEMENT = '521'.
                CALL FUNCTION 'WRITE_FORM'
                         EXPORTING  WINDOW    = 'MAIN'
                                    ELEMENT   = '521'
                         EXCEPTIONS WINDOW    = 1
                                    ELEMENT   = 2.
    You might try out to write your code within the 521 elemnt in the sapscript.
    Regards
    Tamás
    Edited by: Tamás Nyisztor on Jun 12, 2008 3:34 PM

  • I am unable to print multiple copies on 1 page

    I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

    Hi,
    In order to print multiple documents on one page, you may follow the steps mentioned below:-
    Press Command+p- Select multiple pages or booklet
    If you are not getting these options, please send us a screenshot to better understand the issue.
    Regards,
    Nakul

  • I'm trying to print multiple frames from a website onto separate pages.

    Firefox has this option on OSX (each frame on separate page), but safari seems to lack such an option.
    I need to print multiple frames (invoices from zencart) each on separate pages. When I try to print with Safari it will either try and print the selected frame, or it will print all the frames as it's laid out on the page (all printed on one page). Am I missing this option somewhere? Is there an extension I can try (already tried print plus to no avail)?
    Thanks for all the help!

    Wasn't aware of that, I'm trying to disable Full Screen completely in all Apps on my Lion.

  • Print multiple pictures on one page..so frustrating please help

    Just trying to print multiple pictures on a single piece of paper. The drop down menu that says "print multiple pictures on page" is grayed out and wont let me select it. I have read thread after thread , watched tutorial after tutorial and nothing addresses this simple command. What am I missing. Thank you in advance for your help

    Select the pictures and type Command+P to bring up the Print window. Then click on the Contact Sheet option at the left. You can change the number of photos per page and their size by clicking on the Customize button and the changing the number of columns on the page. The size of each photo will automatically be scaled to fit.
    If you want a specific size, then instead of selecting Contact Sheet select a print size. The size you select will determine how many photos of that size you'll get on the paper size selected.

  • Print multiple pages on one page in Preview?

    I tried to print a PDF in OSX Lion and I was unable to find the option to print multiple pages on one Page. Instead there is an option to print multiple copies of pages on one page. Does anybody know where I can find the old option from (as in Snow Leopard, Leopard, Tiger..)? (See screenshot.)
    Thanks!
    roboter

    Look under the "Vorschau" menu for the Layout menu, and then choose "Seiten pro Blatt."
    Hope this helps.

  • Print multiple photos on one page to printer

    I am new to macs, and I can't figure out (using iphoto 11) how to just print multiple photos on one piece of 8 1/2 X 11 paper in my own printer at home. I want to choose the size of each picture (like one 4X6 and two wallets on one page. How do I do this? it seems I can only print one pic per page when I use the print function in iphoto. Please help! If i can't do this basic thing I feel like I just wasted a couple thousand dollars on a really expensive piece of junk.

    This is a detailed set of instructions I made for my mother to use. Hope it helps.
    To print single or multiple photos in iPhoto
    Open iPhoto
    If photo(s) are not already in iPhoto then dragand drop into iPhoto
    Locate photo(s)
    Select (highlight) photo(s)
    Click File
    Click Print
    New window pops up
    Select border type on left side (standard, etc.)
    Select Print Size at bottom right (2x3, 3x5,etc.)
    Click Customize
    New window opens
    On bottom right are new icons
    IGNORE Print settings -are the options you chose in steps 7a, b & c
    IGNORE Themes - is thesame as step 7a
    IGNORE Background –ignore in most cases
    IGNORE Borders –default is 1 (use default in most cases)
    Layout (select 1 or 3 in most cases)
    1is horizontal photo
    IGNORE 2 is horizontal photo with text below
    3is vertical photo
    IGNORE 4 is vertical photo with text below
    SettingsClickon Photos per page
    If you want only 1 copy of each photo you selectedon each page then choose Single photo per page
    If you want 2, 3 or 4 different photos on eachpage then choose Multiple photos per page
    If you want many copies of the same photo oneach page then choose Multiple of the same photo per page
    ClickPrint on the bottom right
    Newwindow pops up
    If the arrow (triangle) to the right is pointingdown click it so it points up and displays additional options
    Choose number of copies (pages to print)
    ClickPrint

  • Multiple Queries on Interactive Report

    hi all,
    Can i run multiple queries based on some condition in creating an interactive report?? I mean
    i want to run a single query as
    if :P12_QUERY == 1 then
    first query
    else if :P12_QUERY == 2 then
    second query
    end if;
    Please provide me the syntax if its possible. Plz help me in this regard.
    With Regards,
    Sunil Bhatia

    Hello,
    You will need to create a pipeline function and use it in your query. But both your queries have to return the same dataset.
    Example:
    function choose_query(v_query_type integer) return some_type pipelined
    is
    v_query varchar2(4000);
    v_cur sys_refcursor;
    v_row some_type;
    begin
    if :P12_QUERY == 1 then
    v_query := 'select ....';
    else if :P12_QUERY == 2 then
    v_query := 'select ....';
    end if;
    open v_cur for v_query;
    loop
    v_row := some_type(null, null, null);
    fetch v_cur into v_row;
    exit when v_cur%notfound;
    pipe row (v_row);
    end loop;
    close v_cur;
    end;In interactive report you have to set query:
    select * from table(choose_query(:P12_QUERY ))
    Best Regards, Kostya Proskudin

  • Printing multiple copies of 3 page BOL in Duplex mode-

    Hi Gurus!
    I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
    At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then  again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
    Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
    Please suggest.

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

Maybe you are looking for