Printing of Barcode makes problem

I am trying to print barcode in my script. I assigned barcode font to the numbers which I want in the form of barcode, I am able to see barcode in the print preview and its printing in the offshore system.
but when the user test it from onsite the same system, he/she can able to see only the value not the barcode.
The barcod which i used is 'BC_CD39'.
For other forms with same barcode, it is printing, but our form unable to print and print preview
kindly needs the help
is the printer TORRSBU04.
Thanks in advance

Hi Again,
Please check this issue with your Basis guy. Because there is requirement of some DLL to the printer configuration.
Regards,
Vijay

Similar Messages

HP Laserjet P1008 printer is having many problems

The Printer has the following problems: 1) HP Claims that in single cartridge (Toner) 1500 pages should be printed but in actual it only prints 900-1000 Pages in one Toner. 2) Dull Printing is observed in the middle part of paper. 3) Tooks about 1-2 minutes to take Papers from TRAY(While Printing multiple Papers) 4) Printer Roller Rolls continuously and printer is not switched off from Power Button Provided in Printer. System Officer, Allahabad District Court

I'm glad you finally succeeded. Your post was one I looked at trying to solve the same problem. But the drivers weren't visible for me after rebooting.
I spent 2 days trying to make my LJ 2100 TN work with OS 10.8.2. The kicker was that when I tried to add the printer to my existing [ethernet] network with my new iMac on Wi-Fi it killed the existing network. No computer could now print! I could still get on-line though.
I did a lot of research on the net; I called my ISP and did learn how to get the IP numbers on each device; I called Mac Tec, they passed the buck, saying because I wasn't using a Mac router they couldn't help.
This post is for others that can't see the drivers they just downloaded. I solved my problem today:
When I tried to add the printer to 'Print & Scan' the 'Add' window comes up; and even though I made the 2.12 download, there were no print drivers to be seen. Apple in it's infinite wisdom left out the 'Advanced' icon in the 'Add' window! Right click the header and add it. Now there is a function to actually search for the print drivers.
You will have to choose 'Type'. I tried a few but 'Jetdirect' worked best for me. NOTE: your printer should be on before you make your choices in the 'Add' window.
Add your printer's IP number in the 'URL' field.
In the 'Use' field, select your proper print driver.
If you did it all correctly, the 'Add' button will light up and hopefully add a new printer to the 'Print & Scan' window.
Good luck. [I also had the delete and replace the printer on my other 2 computers in the network to make them able to print again.]

Duplex Printing on Canon IX6560 Problem

i've got problem with duplex printing on canon ix6560, i've installed the latest driver from canon website (11.7.1.0) for OSX Maverick (10.9.5). what is the solution ?

First, check the printer specification to make sure it's capable of duplex printing. If it is, there should be a setting in the Finishing tab of the print dialog. Reportedly, Canon tech support sometimes advises customers to uninstall the existing software before installing an update.

Printing custom barcode from script

Hi Friends,
Need help.
I have created a barcode from SE73. I used it in a layout . I want to print it from Script ( With driver program) . I am getting print preview . But when I give print barcode is not coming. But the same barcode I used it in SMARTFORM. from this I am able to get preview and print. How to solve this. Please help me.

Hi,
If you are using zebra printer for Barcode printing then,
1. for scripts you will have to write barcodes in postscript format (manual coding format).
2. smartforms are higher version and are integrated with zebra printer. So there should not be any problem in converting the barcode character format and printing it.
If you are using laser printer (normal printer)
1. barcodes through character formats in scripts will not work.
2. will work with smart forms.
What is meant by manual coding???? pls help me.

Just bought a new iMac, with Lion, for my wife. When is was wifi with her old iMac on line with it's printer, HP C6200, no problems printing. Now that it is by itself it does not recognize the C6200...It recognizes my laser hp 1012 and laser hp 6300

Just bought a new iMac, with Lion, for my wife. When is was wifi with her old iMac on line with it's printer, HP C6200, no problems printing. Now that it is by itself it does not recognize the C6200...It recognizes my laser hp 1012 and laser hp 6300 but will not print to them wanting an autenication

How is the C6200 connected to the iMac, is it via USB or Wi-Fi? If it's via Wi-Fi please make sure it's connected to the router using the printer's Network Wizard. Then click System Preferences - Print & Scan and assuming the iMac is on the same network as the printer, if it is the printer should be seen. If it's not then click the + sign and add the printer. Apple provides instructions in Printing Overview OS X Lion

Can I use report vi print QR barcode?

When I try to use report vi to print QR barcode through Zebra s4m printer, the barcode will become to rectangle not square as expected.
If I use a laser printer, the barcode keeps in square. If any one can help me with this problem?
Thanks a lot!

This (probably) has to do with the way your Bar Code Printer interprets the data produced by LabVIEW. Are you creating an HTML document or some other format? I suspect that you'll need to get help from Zebra for this.
BS

Printing labels (barcode, datamatrix code, ...) with LabView via Codesoft

Hello together,
could anyone post a sample vi which enables printing labels (barcodes, datamatrix code, ...) with LabView
via the Teklynx Codesoft Runtime Software? There are no sample programs from Teklynx for LabView.
Many Thanks for your help, Thomas.
Message Edited by maximint on 01-04-2007 10:04 AM

maximint wrote:
Hi JLS,
thanks for the answer. I agree with you that closing the references is the best und most stable solution. But it is really slow. I made an exe but this is also slow.
But apart from this, the VI is running well, even with a handing over of variables. I guess this is one of the first VIs in the net which combines LV with
Codesoft from Teklynx.
Thanks, Thomas.
PS: I made a wrong click on the rating of your last post. Sorry. I guess I rated it too bad.
Well, this is easily solved with an intelligent global buffer VI or as they are also often called a LabVIEw 2 style global. I use them quite often for all kinds of reasons including to avoid globals in my programs almost 100% but this is one of the cases where they are also very handy.
Basically you write a VI that has a while loop, and a case structure inside. The while loop normally only executes once. One or more uninitialized shift registers store different values that can be reused on each call to that VI. The case selector is wired to an enum (I make them always strict typedefed) on the front panel and that one is connected to the connector pane of the VI.
Make the enum have init, print, close items and in the respective case frame do the opening of the refnum in the init case and anything else you need to do once at initialization time storing the refnum to the right shift register terminal. In the close case do everything to close done the software and then close the refnum coming from the right shift register terminal itself passing a Not A Refnum to the right shift register terminal. The print case uses the refnum from the right shift register terminal too, does all that is necessary to do printing and then stores the refnum back to the right shift register terminal. You now have an intelligent manager function for your interface to the printing software.
The init case is called somewhere during initialization of your application while the close case is called somwehre when you close your application. A variant is to combine the init and print case but forst test for the refnum to be Not A Refnum (comparison palette) and in that case do the initialization first, otherwise just do the printing. The advantage with this is that the Codesoft interface is only initialized if you really need it.
There is one caveat for this if you use dynamic top level VIs to implement for instance test steps or deamon like operation. LabVIEW remembers the top level VI under whom a refnum was opened and automatically closes refnums when that top level VI goes idle (stops running). So you would need to make sure that the initialization is done in the main hierarchy that is guaranteed to run for the entire time that your interface is required.
I have included a small archive containing an API for Codesoft 7 that also supports variable query and substitution in templates. It is an older version of something I'm currently using and not very well tested as is, but the newer version is a lot more involved and complicated and not suited to be put here. I also included another archive showing a version of such an intelligent manager buffer function using that API.
Rolf Kalbermatter

SAP Script : Control Commands for printing Label (barcode) by Zebra Printer

Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
Ramasamy

HI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN

Printing different barcode types..!

Hi Guys,
I have a requirement to print barcode of materials, the barcode type varies depends on the length of material No.
How this can be acheived in Adobe form ?
I am looking to control the visibility of the barcode through some conditions.
Also how I can loop through a internal table to print the barcode, which should each one in a separate page.
Thanks
Sam

It is a javascript-statement. IF you aren't familiar with javascript it is hard to develop a adobe-form at all.
My first case would be to make yourself familiar with the concept of Adobe-forms. You can work thorugh the getting started content provided by SAP and Adboe. There you will get a lot of basic experience on that tool itself and formclac/javascript.
Anyway, here is the JAvascript-example for the case you need to complete the solution:
switch(this.yourfield_barcodetype.value)
case "A":
execute code block 1
case "B":
execute code block 2
default:
code to be executed if n is different from case 1 and 2

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

How to Print Multiple Barcode in one line

Hi All,
I am printing barcode using <c1>&lwa_itab-matnr</>. now i have a query i want to print in the same line one more bar code with the values. but i m not able to print it. will any one pls help me out in this how i will print more than one barcode in one line.
i have tried this syntax also
<c1>&lwa_itab-matnr& &lwa_itab-matnr&</>.
But it is not giving gap between two barcode. it is considering space and converting space also in barcode which i don't want. I want to print two barcodes separately with some space. How will i do this.
Pls answer it. it is very urgent.
I am doing this in smartforms.
Thanks
Garima
Edited by: Garima Mittal on Jun 18, 2008 12:34 PM

hi,
try like this.
<c1>field1_</c1>_ <c1>field2_</c1>_
give the two fields in the same line.
so this will help u in printing the barcodes in the same line
please reward me if helpful.
regards,
Reddy.

How to print Vertical barcode in SAP script

I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?

1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay.

How to print the barcode in a smartform satisfying specific condition

Hi
I have a requirement where I need to print the barcode System Bar code = BC_93
satisfying the following requirement:
The Bar code is made up of the concatenation of code1 , dash character
and code2. The two codes ( that is some field in a custom table) should be
eight char long each (put leading zero if the length of the code is shorter).
This barcode shall be printed always apart from:
a) code1 material type is ZCPF
b )Is a combi order, with no code2 stored in storage location abc
please help with example . its very urgent , points will be rewarded.
Thanks

To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Re: how to print barcode using smartform and sapscript...?

How to print the BARCODEs in Oracle 6i Reports

Hi,
I want to print the barcodes in the report outputs. I am using Oracle Reports 6i and Oracle Applications 11.5.10.2 with 11g database.
Please help me with the requirements.
Thanks,
Pavan

Go to Search and type in "barcode".

How to print a Barcode VERTICALLY in a SAP Script ?

Dear Experts..
I have to print a Barcode <b>vertically</b> in a SAP Script.
Could you please help me regarding this.
Thanks in advance.

Hey SR,
follow these steps :
Bar code in Smartform :
General definition of Bar code:
Bar codes are standardized characters of a symbol made up of a group of lines and spaces that can be recognized by an optical scanner. Bar codes uniquely identify article data, production numbers or transport units, for example. They can also contain additional information such as batch number, expiration date or weight.
Example
In the Logistics Execution System (LES), certain field entries can be represented by bar codes and printed on the transfer documents. This simplifies certain data entry processes such as order confirmation.
Type of bar code:
Bar codes are based on a binary principle and consist of a series of stripes/gaps of different widths. The sequence of the stripes or gaps results in an (alpha) numeric statement. Bar codes are read optically. Due to varying requirements, bar codes may differ with regard to the following aspects:
     printer tolerance
     decoding tolerance
     character width
     automatic check
     number of characters
Steps to implement bar code in the smartform:
     Use the transaction code smartstyle. Give a suitable name .Choose create.
     In change mode of the Smart Style select the Character formats node and choose Create.
     In the Character format field enter a two-character character key.
     Select the desired attributes of the Bar Code on the tab Standard Settings.
     Choose Activate.
     Assign the character format to the field or character string in the smartform.
     Activate the smartform.
     Test the same.
Regards,
Kunal.

Printing of Barcode makes problem

Similar Messages

Maybe you are looking for