Printing of GR/GI Slips and Batch Labels

Hello All,
Currently, at my client's place system is configured such a way that after completing the MIGO process, it prints 2 copies of the GR/GI slips whenever the goods movement takes place. Now along with the GR/GI slips they want to have the system prints the Batch labels for the quantities of units received.
They want to print the batch labels by using the MARA-WESCH field on the Plant Data/Storage view of the material master. But after checking that field I found nothing (not a single value) in it. But still the system prints 2 GR/GI slips after doing MIGO.
I am not able to figure out how to configure the system so that it should print number of Batch Labels by using the value in this field without affecting the current flow of GR/GI Slips. If anyone know about this then please respond.
Thanks.

Hi
We set up a separate condition record (Z001) which prints labels in addition to out 2 GR slips
We purchased some software from Zebra (who supplied our label printers) that is specific to SAP. We created the labels using the Zebra software and then imported the layout.
Therefore with a separate condition we could maintain separate parameters for the number required to be printed.
DArren

Similar Messages

Firefox 4 Beta has problem when printing shipping pages from Amazon Marketplace, it shows and prints strange symbols instead of the packing slip and the label. Do you have any idea why is that?

Well, I installed it 2 days ago and yesterday when I tried to print a packing slip and a label for Amazon customers it printed so many strange symbols that were nothing like what they are supposed to be, not even close. When I printed it with another browser it was all fine, so it is obviously a problem of the new version of my favorite browser. Probably something with the encoding, but since I'm not a computer geek, I cannot give more info. :(

'''If you go the the menu and click "Print Preview" then it will show normally, and will print correctly from there. You must do it this way the first time you try to print though, if you try to print (using the print command) and it is messed up, then it shows it messed up in the preview. It's not a cure, but works for now until this bug is fixed.'''

Packing slip and address label for delivery

Hello all,
I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
Thanks,
Maxx

Hi Max,
You have to carry out your settings in:
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
1) Maintain Access Sequence
- you should have a valid access sequence with proper the condition tables
2) Maintain Outout Types
- you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
- you output should be assigned to the proper access sequence
3) Maintain Output Determination Procedure
- you should have a valid procedure --> you have to assign your output type to the procedure
- in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
4) Assign Ouput Determination Procedure
- You have to assign the procedure to the delivery type you use
Master Data
If your configuration is OK, you can create the output determination condition record in VV21:
- you have to choose the proper key table
- you have to define the proper conditions
- you have to define the printer
- you have to define number of outputs
- etc
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
- Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
- You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
Regards,
Csaba

Automatic Printing GR Slip and Label in MIGO

Currently,if i post Good Receipt using MIGO, GR slip will be automically sent to printer (output type WE01).
The is new requirement to print GR slip and label (output type WEE1) automatically when post good receipt using MIGO.
Can the configuration cater for the requirement?
If can,what is the step that i can take.
If not is there any user exit or BADI that i can implement? any suggestion?

Hi Alfred
The user exit the u give me is helpful.
I already implement both user exit.
I put breakpoint in the include program and when i run the transaction ,it did not stop at the breakpoint.
Seem that the transaction did not go to the user exit.
Is there any step that i missing?
Please help.
currently i'm using version 6.0

Custom Label Printing - Print position creeps up and across labels

Hello
I am using VS 2010 and have updated to SP4 for Crystal Reports
I used the custom size option to make a label report. The built in options for label sheets do not match the labels that I have
I made a label report for 3 columns and 8 rows using the label size, margin widths top and bottom, left and right, with the 2 widths between the columns. But this does not print correctly on the labels. The printing on the label rows creep up so by the time you reach the 8th row the label is partly on the 7th Row. The left hand column prints correctly. the middle column prints closer to the left edge of the label than in the first column and the third column is printing on the gap between the 2nd and 3rd column.
I tried making a new report and set the dimensions to the maximum sizes that would allow 24 labels (3 columns and 8 rows) but the same problem occurs as when having set the correct sizes
I am not sure if there is a method to edit the label sizes, and margin widths as happens when creating a new report or if the only option is to create a new report.
Any assistance or information on how to make the labels print with the correct row and column spacing would be appreciated.
My Labels are 67mm x 36mm. there is no space betwwen the rows, the margin at the top and bottom of the sheet are the same, and the left and right margins are the same. The space between the columns is 2mm

Thank you for the reply Rob
There is no Avery template in the list that has 24 labels, which is why I was using the Custom Label
I have tried many variations trying different widths and gaps between the labels, but in all cases by the time the 8th row is printeed the printing has crept up and is now overlapping onto the bottom of the 7th row label. The third column is printing on the gutter between the 2nd and 3rd column.
When creating a Custom label it would appear that the Wizard works on Letter size Paper regardless of the paper size that the printer is set to. All my printers are set to A4 size paper.
Letter Paper is 215.9mm x 279.4mm compared to 210mm x 297mm for A4. While the width is not a problem the length is less, and that may well be what is causing the problem when the Wizard creates the labels, despite changing the Paper size to A4. But the paper size can only be changed and set to A4 after the wizard has been given the label size and spacing for margins and gutters.
In my view the Wizard should ask for the paper size and then ask for the label size settings and layout
Regards
David

How do I re-print and return label

I called to have my defective device exchanged. Costumer service placed a new order for my phone and told me I need to print a shipping label and send back my current phone. I tried to print the return label and it didn't end up printing and now I dont have an option to print it anymore. How can I get a new label, I'm afraid they're going to charge me the full price if I somehow don't get a label or if it ends up shipping back late.

jdawisha1031 We certainly understand not wanting to be charged for a device. Don't worry, our replacement devices are shipped with a prepaid return label. If you haven't received the replacement yet, wait for the device to arrive and a label will be inside the box. If you have received a replacement and there wasn't a label in the box, then we can mail you one. We will not charge you for the device as long as it is returned within a timely manner. Let us know if you have any other questions.
sheritah_vzw
Follow us on Twitter
@VZWSupport

Printer device group and a label format in SAP AII

Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
Peter

Hi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE.

Printing boarding passes and Fedex labels

When I use Safari for Windows to print my airline boarding passes or Fedex labels at work it reduces the size by about 25%. Is there a setting I'm not familiar with that is causing this? I don't have the same problem with Firefox or IE.

I have the same issue with UPS labels. To get around it, I do a print preview, click the settings icon (looks like a gear) and then set the margins to 0.25 (quarter-inch) all the way around. YMMV

"save as" work differently in menue and batch

If I save in Illustrator CS4 a EPS File from the menue with "save as" and then I place the file in InDesign CS4 and adjust it proportionally to the frame it works fine.
The object is shortly to the frame.
The same file with the batch option (New Action "Save as"...) works the same but after adjust, it looks like not the object but the drawing area is fit to the Indesign frame.
Any ideas to work around, i have to convert and save more then 1000 files
Example file attached
best regards

I have another methode.
In Visual Basic, I can print the file as EPS and can control all parameters!!
It is not so elegant but it works without user interaction for a lot of files.
Maybe it is the solution for your problems too
Sub Illu()
Dim fs As FileSystemObject
Dim MyPrintOptions As New PrintOptions
Dim MyPrintJobOptions As New PrintJobOptions
Dim SourceN, DestN As String
Dim fso, Folder, CFiles, fc
    Set fso = CreateObject("Scripting.FileSystemObject")
    SourceN = InputBox("Source Ordner eingeben", "Source") 'input source path of the files to convert
    DestN = InputBox("Dest Ordner eingeben", "Destination") 'input destination path of the files to convert
' or for fix path
    SourceN = "C:\Dokumente und Einstellungen\wgepsch\Desktop\Grafik fertig\"
    DestN = "C:\Dokumente und Einstellungen\wgepsch\Desktop\Grafik fertig\eps\"
    Set Folder = fso.GetFolder(SourceN)
    Set fc = Folder.Files
    For Each CFiles In fc   'for all files in source path
        Illustrator.Open SourceN & CFiles.Name 'open file in Illustrator
        MyPrintJobOptions.File = DestN & Left(CFiles.Name, Len(CFiles.Name) - 4) & ".EPS" 'set destination path and filename
        MyPrintJobOptions.PrintArea = aiArtworkBounds   'IMPORTEND this is the solution for the problem set the area to the artwork
'This parameters I dont need
        'MyPrintJobOptions.ArtboardRange
        'MyPrintJobOptions.BitmapResolution
        'MyPrintJobOptions.Collate
        'MyPrintJobOptions.Copies
        'MyPrintJobOptions.Designation
        'MyPrintJobOptions.File
        'MyPrintJobOptions.Name
        'MyPrintJobOptions.PrintAllArtboards
        'MyPrintJobOptions.PrintAsBitmap
        'MyPrintJobOptions.ReversePages
        MyPrintOptions.PrintPreset = "EPS" ' this is my printer preset name in Illustrator where I stored alll other parameters
        MyPrintOptions.JobOptions = MyPrintJobOptions
       Illustrator.UserInteractionLevel = aiDontDisplayAlerts
            ActiveDocument.PrintOut MyPrintOptions 'output as EPS file with my parameter
        Illustrator.UserInteractionLevel = aiDisplayAlerts
        ActiveDocument.Close 2 'close the file without save
    Next
End Sub

Photoshop prints too small in windows7 and windowsXP

I have just installed my new OfficeJet Pro 8500. Everything went fine on both my new os7 and xp machine. Documents print fine. The test page Printed fine. When I tried to print cd labels from both machines it prints them 1/4 size. I have checked everything I know to check. different label pages.....to no avail. What am I missing?

I had the same problem and wanted to pass on the solution. Photoshop confuses printer driver names when it prints. HP installs both a standard printer driver and a fax printer driver and the similar names get messed up in Photoshop. The proper thing for any application to do is to use the default printer and stick with it unless you change it, however that isn't the case here.
How to fix it, you ask? Go to Start - Printer and Faxes and select the HP Fax printer driver. Right click and select properties. At the top of the window, change the name to something different. I recommend adding the word "Fax" to the beginning of the name. This changes the name enough that Photoshop doesn't get them mixed up. Save your changes and go back to Photoshop.
Enjoy printing directly from photoshop without having to convert to JPG on your HP Printer!

WE03 Output type with print version '3' (Collective Slip)

I am using output type WE03 with combination of print version 3 (Collective Slip) to print GR slips.
My requirement is to print all the line items on single page (unless there is no room) .
However with this output type one line item is printed per page.
Does anyone manage to print items continously on the page without page break?
Is there any other output type/print version for that?
Well, the last option will be to change the print program and sapscript, but I am trying to avoid that...

Created new print program and replaced sapscript with smartform

Link between Bin Location and Batch Number

Hello.
I'm having some issues to find an link between the Bin Location and Batch Number.
I've searched through OBIN, OIBT, OBTN, OWTS, but no clue of what makes the link between this guys.
Does anyone here know something about that?
Best Regards.

Hi Araujo
Check this out > SAP Business One 9 - List Of New Tables posted by Posted by Kennedy T in Reporting and Printing it might help.
Des

Pages Templates - Why doesn't Apple include CD covers and CD labels?

Considering how music oriented Apple is, I'm surprised that Apple hasn't thought of including templates for CD covers and CD labels. This would be exceedingly useful to have!

iTunes itself can print a CD insert with song titles and time. Labels on CDs, in the long run, aren't a good idea. In a slot loading drive they are a disaster waiting to happen and even with a tray loading drive they can cause trouble; over time the glue dries out and the label can begin to peel. If you really want CDs and DVDs labeled, look to LightScribe or printable discs and a printer capable of printing on them. As for CD covers (and other kinds of labels) Avery has a free program that is pretty impressive. Of course, you can always go to the Avery web site and find a Word template which will open right up in Pages and you can have at it.

Printer keeps defaulting to Fax and Photo tray paper

Hi.The printer keeps defaulting to FAX and the photo tray paper. How do I correct this on windows Vista?

When you open an application's Print dialog you will see a drop down menu labeled Printe:. Select your printer from the list before clicking on the Print button.
In Print & Fax you can set whichever printing device as the Default by selecting it and clicking on the Default icon in the toolbar. You can also select it in the Print & Fax dialog.

Stock on posting date -storage location and batch wise

Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?

You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Printing of GR/GI Slips and Batch Labels

Similar Messages

Maybe you are looking for