Printing on 2 sides of paper

Where in Windows 8 can I tell the printer to print on both sides of paper?

Hi,
Well, it depends on your printer. Does your printer support duplex printing automatically ? If yes, you need the right driver. What is it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    HI,
    You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HP officejet 4630 won't print on both sides of paper

    Cannot print on both sides of paper. The backsideprints first, then wait for ink to dry, front side starts to print then stops with a windows error message popping up on screen saying cannot print document.
    I have found that I cannot print multiple pages either. For example, I decided to print the 4 page document as single pages only (since double sided wouldn't work) and the results were first page prints second page prints about a third and then all stop with error message that printer cannot print the pdf document. so I had to select each page seperately to finnally get all four pages printed. HP print and scan diagnostics says theres is no problem. Windows diagnostics says there is no problem.
    Obviously there is a problem can any one offer advice and solution?
    Thanks
    Kimoho
    This question was solved.
    View Solution.

    Hello Kimoho,
    Could you please check to Duplexer unit seem installed on printer properties and in the printing preferences section is it selected to print on both side.
    If its not seem installed, adjust to it installed and try again.

  • How do I print to both sides of paper for greeting card on Brother Printer

    I did not find the answer on the forum. I have iLife 09 and this Brother MFC-790CW printer. I do not see any automatic setting for printing on both sides. I am using a iPhoto greeting card template and it looks OK with a page one for the front and a page two for the back.
    Maybe the only way is to print out all the fronts pages (20) and then put the paper back in and print all the pages 2 (the text inside of the card). That seems like it would be faster than other ways, except automatic.
    Obviously I should have done this a month ago and sent the project to Apple, but now I have no more time. Ii have the right paper for the one fold cards and plenty of ink

    You need to have an image editor that supports layers. If you do follow the directions in these tutorials:
    #8 - Printing a iPhoto Greeting Card
    #8a - Printing a iPhoto Greeting Card to Standard Stock Sizes
    Here are some editors that support layers:
    Some Image Editors that support layers:
    Photoshop Elements 8 for Mac - $79
    GraphicConverter - $45
    Rainbow Painter - $30
    Acorn - $50
    Pixelmator - $60
    Seashore - Free
    Portraits and Prints - Free
    GIMP for Mac - Free
    You might be able to use Pages instead of an image editor.
    Happy Holidays

  • How to print on both sides of paper

    I have HP 3050A wireless printer. How to print on both sides of paper

    This printer does not do auto duplexing. The only way to print on both sides of the page is to print one side, put the paper back in manually, and then print the next page. If you have something say 10 pages long, you can also print only odd pages, then only even pages tospeed it up.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • 'Print on both sides of paper' in Adobe Reader 10.1.2 + DFS shares....

    Hello
    After the latest update a new print dialog is available which includes the option to 'Print on both sides of the paper'. Our printer (available via a print server in a Windows domain environment), is capable of printing duplexed copies of documents but is configured to default to not use duplex. When the option to do this from the Adobe Reader print dialog is selected the printer driver overides it and the document is printed normally (not duplexed).
    Is there a way to hide this option? We often need to print duplexed copies of documents but usually set it in the print driver when it is needed. Because the option is being overidden it has the potential to create an enormous amount of wasted paper and toner and will increase our printing costs.
    Also, when V10 was released, trying to open pdf's located in DFS share paths caused the program to hang. The solution was to disable protected mode. I tried enabling protected mode after this update (and previous updates), and restarted the application but instead of hanging, Adobe Reader now displays a message box stating:
    There was an error opening this document. Insufficient system resources exist to complete the requested service.
    If I disable protected mode and restart Adobe Reader the document can be opened.
    Any help appreciated.
    Thanks!

    Hi, Shatik
    Thanks for replying.
    The DFS shares are mapped as a network drive. This is done just once using a batch file that uses the persistent switch. No roaming profiles, no username\application data path.
    Since posting this I can now access PDF's, but many of our staff are now unable to scroll through an entire pdf without Adobe Reader hanging. Again, removing the checkmark in the protected mode option allows full scrolling of a pdf.
    Disabling/enabling antivirus real-time scanning makes no difference.

  • Print on both sides of paper

    print on both sides of paper

    Hi,
    Based on the following link, under "Paper-handling specifications", it does not have a duplexer:
       http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=4322968&objectID=c0305889...
    It can't print both sided (or duplex) automatically.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp deskjet 2050 j510 print on both sides of paper

    I cannot seem to find the setting to print on both sides of a page. Using a mac book pro and an hp deskjet 2050 j510. Please help!

    Hi @kryssy2313,
    Thank you for visiting the HP Support Forums! I see you are trying to print on both sides of the page on your HP Deskjet 2050 from your Mac running the 10.5 Operating system.
    Please get started here: Changing Print Settings in Mac OS X
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • PRINTING ON both side

    i want to know how can i printing in both side of paper in laserjet prinet ?about printer settings not windows settingthank you

    Please read this post then provide some details.  What operating system? 

  • How do I get my HP 7520 to stop printing on both sides of the paper?

    I do not know why, but my HP 7520 Printer started printing on both sides of the paper rather than one side.
    How do I reset it to print on only one side

    Hi @Wineroth 
    I can help you disable the duplex printing feature. I suggest resetting the printing system to delete all printer presets. I suspect something was saved at some point that is causing the printer to print 2 sided. 
    OS X Yosemite: Reset the printing system
    Please let me know if this resolves the issue,
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • With ADOBE READER 10.1.2 I have problem to print 2-side of paper

    With ADOBE READER 10.1.2 I have problem to print 2-side of paper. The same document(s) print correctly with option 1-side. With option 2-side it print only last page, aditionally without any adjustement, just cut a half of last line. Even I want to reinstall previous version (10.1.1) but I cannot to find it.

    Dear Marcik565,
    The same workflow is working just fine for us. Could you please send us the screenshot of the print dialog at your end?
    Thanks,
    Atul Agarwal
    Adobe Systems

  • How do I print on both sides of the paper on microsoft word, excel for mac?

    My printer supports printing in both sides of the paper, and prints fine on both sides any pdf file.
    But there is no way to make it print on both sides when using Microsft Word or Excel
    How do I set it up?

    Try asking in the Microsoft Office forums. http://answers.microsoft.com/en-us/mac?auth=1

  • Black line on right side of paper while printing on laserjet 1018

    WHILE PRINTING DARK BLACK LINE IS APPEARING ON RIGHT SIDE OF PAPER.

    It is time for maintenance on your printer. Perform an alignment.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Printing scripi on both side  of paper

    Hi All,
    I want to print script on both side of paper.
    my observations.
    the output device they are using it prints report on both side of paper.
    in script , processing mode selected D  and i am printing dunning letters.
    in main program used NEW-PAGE. that should not make any difference.
    let me know from script side what i have to do and also from my device type what else i have to check.
    urgent
    Regards
    Gopal

    hi,
      We can print both sides of the paper
    <b>You switch to duplex or tumble duplex mode with a form page for which one of these modes is specified. To continue printing in the current mode, for follow-on pages you must define another page in which the Print mode field is empty. Otherwise, the following pages after the mode switch will continue to be printed only on the front sides of new sheets of paper.
    The reason: When SAPscript sends a page with Print mode D or T to the printer, it not only sets the print mode accordingly. To ensure that the first page in the new mode is correctly output, SAPscript also instructs the printer to output the page on the front side of a sheet. If SAPscript sends a sequence of D or T pages to the printer, the output is printed only on the front side of each sheet.
    You define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
    To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
    Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.</b>
    The print controls that must be defined for a device type depend upon the SAPscript printer driver that is to be used with the device type.
    set the followint print control.
    <b>SPMDU</b>
    Begin duplex printing (both sides of paper). (Needed only if supported by device.)
    <u><b>follow this link it will help.</b></u>
    http://solutions.brother.com/Library/pdf/SAP_install_latest.pdf
    http://wiki.ittoolbox.com/index.php/HOWTO:Sap_script
    regards,
    AshokReddy.
    Message was edited by:
            Ashok Reddy

  • Print in both side of the paper

    Anyone can tell me how I can print in both side of the paper?
    Thanks

    Does your printer handle this automatically? If so you set that in the printer driver settings. If not, you have to print one side, then turn the sheet and print the other.
    It's very important when you ask a question like this one that you provide a full set of information including your version of InDesign, the operating system, and the printer make and model.

Maybe you are looking for