Printing on 7 x 10 paper from PSE 4

I have prepared a template in PSE 4 to print greeting cards on card stock that is 10x 7 inches in size. After printing and folding I have a finished card that is 5x7.
I have a Canon PIXMAi8500 printer. I set the paper size in the printer program and try to print from PSE4 Editor. The results show the printing off center as if program or printer thinks the paper being used is 8.5x11 rather than the smaller 7x10.
Any hints will be greatly appreciated.
Barbara

Barbara,
You would be printing from the Editor. I hope it works the same for you as
it does on my old Canon BJC-8200. I don't know if your printer does
borderless, in my case I allowed .25" on all sides, which means my image is
6.5x9.5". Go to >File >Print. You'll see the preview on 8.5x11 paper. Now
rotate your image as necessary. Click on >Page Setup, then on >Printer
>Properties (each in its own dialog box). In Properties click the Page
Setup tab and you will see a dropdown menu with various sizes. One of the
should be Custom. Clicking on it will bring up a dialog where you can enter
your actual size, 7x10". Now click OK several times until you get back to
first Print Preview and your image should be properly aligned on the 7x10
sheet. Now click Print.
If you are not sure and don't want to waste photo paper, you can select a
6.5x9.5 area and stroke it with 3 pixels and run that through the routine on
some regular paper.
HTH,
Juergen

Similar Messages

  • Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

    The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
    If you are wanting to print index cards without removing the paper from the tray, follow these steps.
    The steps below are for 3 x 5 index cards.
    1.) Open Microsoft Word
    2.) Go to the Insert tab and insert a rectangle shape
    3.) Draw a rectangle of any size
    4.) Right click on the rectangle and select "Format Autoshape..."
    5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
    6.) Under the Layout tab, select "Center" for the horizontal alignment
    7.) Click OK
    8.) Use the keyboard up arrow key to move the rectangle to the top of the page.  Make sure the top edge of the rectangle touches the top edge of the document.
    9.) Print this document on plain 8.5" x 11" paper
    10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up.  Then place an index card over the rectangle and align with the border of the rectangle.  After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
    Note 1: This are USA instructions.  If you live in the UK or other countries you may have different paper size standards.

    I can't tell you how much I HATE this printer.  I will never buy an HP product again.  BROTHERS printers are simply and easy to use.

  • Printer won't load photo paper from the photo tray

    My HP C7280 won't load the 4x6 photo paper from the photo tray.  The photo tray moves in towards the feeder, but fails to actually load the paper into the feeder.  Any suggestions on how to correct it?  Thank you.
    Mike
    This question was solved.
    View Solution.

    Hey,
    Please take some time and look through this document to make sure that you are loading the paper properly,
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    These are the Macintosh instructions but the steps to prepare the photo print are the same but they are steps you would do on Windows just ignore the instructions.
    Have a great day. Get back to me.
    I worked for HP.

  • Cannot print using a HP Photosmart c410a from PSE 9

    Just loaded PSE 9 onto a newly built Win 7 machine.  The Photosmart c410 is an AIO including fax.  Everytime I try printing, I get a dialog for the fax part of the AIO.  When I choose the c410 from the print menu item, the dialog allows me to specify the tray, paper type and size, etc.  However, the selections are not reflected in the preview (in the same dialog).  When I first installed PSE, the c410 fax was specified as the default printer.  I changed it to the actural c410 printer after installing PSE.  Any ideas?

    I am having the exact same problem. The strange thing is that when you print a picture from the Organizer it loads the correct driver/software for the HP Photosmart c410a and prints just fine. The problem is with the editor as it wants to load the fax drivers/software for the c410a and there appears no way to fix this???
    I found a solution on an earlier post where someone was having the same problem with windows 7 and PSE8. I went into devices and printers and went to the printer properties for the HP Photosmart c410a Fax and just put my initials in front of the HP and the editor worked just fine printing to the proper software and driver.

  • How to print a photo onto A4 paper NOT photo paper

    How do I print a photo onto A4 paper from my ipad using an air printer INSTEAD of onto photo paper?  I can't find anywhere to change the settings.

    I use the HP Printer Control app.
    http://i1224.photobucket.com/albums/ee374/Diavonex/08300eb956e971ef4aa57fe9dfe9c 626_zps6aa54a01.jpg

  • Printing on a ROLL from PSE v5.0

    Does anybody know if we can print several pictures (4x6 for example) side-by-side on a roll?
    I was told we could, for example, take 20 pictures and print 2 4x6 images side-by-side and 10 sets long on one sheet of paper, then cut them later.
    I would appreciate anyones help/response...
    Jody Compton

    In message <[email protected]>,
    [email protected] writes
    >Does anybody know if we can print several pictures (4x6 for example)
    >side-by-side on a roll?
    >
    Umm, I suspect it in part might depend on the printer/driver. I can my
    930c up to print on banner paper, but PSE just seems to treat it as
    single sheets of A$ - no idea if that is what would print out, never
    done it.
    You certainly could just tell it that the paper was single sheets of a
    suitable size and it would lay out the images appropriately, though
    there might be a bit of a gap between what would be each sheet of paper,
    but that would just mean a little extra trimming.
    The above is using the Organiser (which is the same as using print
    multiple files from the Editor)
    Chris French

  • Cannot print to an HP Officejet 5610 anything from PSE Version 10

    Help! I'm using Adobe Photoshop Elements Version 10 and I cannot print anything either directly from it, or even anything created out of it to my HP Officejet 5610 series printer.  I am not having the same issue that others have reported with the Fax Window coming up, nothing prints at all.  It doesn't even go into the Print Queue.  I have been discussing (on a forum) with HP and they have suggested using the Deskjet 990C driver.  I tried that and still nothing happens.  I can print to a Canon Pixma with no issue, it's definitely something with this printer/print driver. I tried renaming the printer to make it shorter, I have tried completely deleting and reinstalling the printer (using HP Cleanup utility), I have updated drivers, tried using the 5610 as well as the 450C and 990C.
    This is happening directly out of PSE as well as anything I create and save - so making it a PDF, it won't print.  Making it a JPG, it won't print.  I can print PDF files not created in PSE with no issue. I can print JPGs not created by PSE with no issue.
    Anyone have any other suggestions on things I can try?

    Hi,
    Can you try some experiments please - or tell us if you have tried them.
    1) Load a new image (one that hasn't been saved before) into the editor and without saving it, try printing from the editor. It is important that PSE hasn't saved it.
    2) Load any image into the editor and do a Save for Web (you may have to reduce the size) in JPG format and see if you can print that JPG either from PSE or another program.
    Please let us know the results.
    Brian

  • PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

    My BRAND NEW (One week from delivery) no longer prints out photos.  It printed out photos several times but 3 days' ago it stopped.
    The paper tray is malfunctioning.  Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!! 
    SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!!   MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
    Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved? 
    This is ridiculous!

    Hi,
    Sorry to hear you are having problems printing. What device are you using to print?
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Why am I getting sharper printouts from Windows Photo Viewer than PSE 7? This was not always the case. has something in my settings changed? I have tried all obvious solutions but no change. How can i get the best image print outs from PSE?

    I prefer to print from PSE as this allows me to set  picture dimensions. Windows photo viewer does not give this flexibility. I am using the same PC, the same printer and the same print file, yet the outcome from each software option is significantly different. WPV is sharp and bright whereas PSE is softer. Can any one help me?

    I prefer to print from PSE as this allows me to set  picture dimensions. Windows photo viewer does not give this flexibility. I am using the same PC, the same printer and the same print file, yet the outcome from each software option is significantly different. WPV is sharp and bright whereas PSE is softer. Can any one help me?

  • Borderless printing from PSE 7 Editor

    Having some trouble printing borderless 4x6 images from the Editor in PSE 7, (I prefer printing from the Editor over the Organizer due to its higher quality output).  I've tried a myriad of different settings from the Elements print dialogue window and am unable to consistently print images without some border being present, either just on one side, or on a top and side together.  Sometimes I can successfully print without the borders, but then when using the same settings on another image, I'm frustrated to see some type of border return.  The image in the print preview window will also vary from one image to the next, sometimes with borders, and sometimes without, however even when no borders are present in the preview, they'll still be there sometimes in the print. Never had a problem like this with Elements 4; using an Epson R1900, with printer driver set to borderless. If anyone else has encountered this, or has suggestions on what to do, I'd love to hear from you.  Thanks!
    Ethan

    Yes seems this is a bug. I will try using printing in PSE 8.0 when it will be released.         

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • My HP phoyosmsrt 7510 wont print 4x6 photo paper from computer/ ok 4x6 from printer itself

    1. HP photosmart 7510 c311a
    2. machine a.  windows vista
                          b. windows 7
    3. no error messages
    4. new printer added 1 day ago....prints from bottom paper tray only from computer but prints from both trays from the printer itself

    I'm having the same problem.  Is there something in the software that I am missing.  I use Windows Live Photo Gallery software for the image, adjust the photo size to 4x6.  It prints a 4x6 photo on the 8x10 paper.  How do I tell the printer to use the size paper I am wanting for each photo?  Can it be changed print by print?  How do I switch it back to the 8x10 paper tray when needed?  Is there a page in the manual I can refer to?  Thanks for any assistance.

  • Failure to print from PSE 9.0 on MAC to Epson XP-800

    I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem.  The problem persists even if I try using a cabled connection rather than WiFi.  I have ensured latest software from Epson has been downloaded.  This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
    Any suggestions for solving this rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
    Grateful for any help.
    Stuart

    Hi Barbara B
    Thanks very much for this suggestion. 
    I followed this advice, both deletions and permission repairs.  This did allow me to print from PSE for the first time - very pleased with this.  Unfortunately the colour reproduction has now gone haywire (having been very good) and there are vertical lines on prints - this now applies to both PSE & iPhoto (the latter worked well before)
    Any further suggestions?  I feel we are close to cracking it but do not really understand what to try next. Please help if you can. Many thanks.
    Stuart

  • I have a hp 8150 printer I keep getting a paper jam only when tray 3 is out of paper jam from tray

    I keep getting a paper jam in my hp 8150 printer when tray 3 is empty and the first sheet try to pick up from tray 2 it seem to jam at the pickup rollers.  Yes, I replaced the rollers and it always seem to jam when tray 3 is empyt & it try to pick up the first paper from try 2

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • MX 925 - how to force the printer to use paper from lower tray

    Hi' there,
    Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
    :-) Sogge

    I found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
    printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
    I print to this printer( DECTYPE, DECNAME) it now defaults to legal.

Maybe you are looking for