Printing on an HP LaserJet P1102w from a Samsung Note 10.1

Hi,
anyone who could tell if and how I can print from my Samsung Note 10.1 to my HP Laser Jet P1102w?
I understand it must happen by connecting my printer wirelessly to my router, which I have not done yet. (I already use its USB connection to my laptop, and shall continue to do so.)
Help is greatly appreciated!
EinarF

Hi,
First connect the printer to your wireless network, it is essencial to print from a mobile device.
First remove the existing device as following:
On the Windows taskbar, click the Windows icon ( ), and then click Control Panel . The Windows Control Panel opens.
In the Control Panel , click Devices and Printers .
Find the icon for your HP product ( ), and then right-click it.
Click Delete to remove the product.
Disconnect the USB cable from the product and the computer.
Once you are done launch the software installation CD again by selecting a wireless connection, it will ask you to temporarly connect the USB.
Once the printer is connected to your network and the blue wireless light is turned On (solid), you may remove the added network device from the control panel as listed at the beginning of my post, then plug the USB and it will be added as a USB for that laptop.
As soon as the printer was connected to your wireless router use the HP ePrint app to print from your Samsung Note:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03679829&lc=en&product=4110396&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to Print Labels? - HP LaserJet P1102W

I'm close to pulling my hair out here. I recently purchased a LaserJet P1102W as a replacement for my LaserJet 1022n that finally gave out. I am trying to print Avery file labels (template 5066). I am using the old file document, I simply need to reprint. So, I open the file and select 'Print' and then hit 'OK'. On my old model, the Attention light would blink red until I hit what I guess is the ok/accept button (I think it was the button with the triangle and the ! inside, but I can't be sure now) - it would then send the print job for the labels though, allowing me to put the label sheet in first and then it would feed that through from the main tray.
With this new model, I follow exactly the same steps but I can't get the document to print. Hitting the Power button on this unit only turns it off. Hitting the Cancel button deletes the document from the queue and it won't print.
I just spent nearly an hour and a half with HP Live Tech Support and they can't seem to give me a straight answer. They're telling me they need remote access to fix the issue or they need me to delete and reinstall my drivers. One thing the techs are sure of is that it is not a hardware issue, simply user error. Even though I repeated the steps that I took and they say that everything is correct. I was also told to "please the paper", whatever that means.
I was hoping that I could find a fellow user of the P1102w here, or at least someone knowledgable who isn't reading from a book. It just feels like there's a step missing somewhere once I bring up the Print menu. Do I need to manually change a setting or direct it to pull from a certain tray? I'm just trying to do everything possible before I actually uninstall/reinstall the drivers. Also, all the software is current, no updates needed.
Someone please help! I'm losing it...or I've already lost it maybe. lol
Thanks in advance for any sanity that you might be able to bring.

I realize this is an old thread, but it came up as one of the first Google search results and there was no solution.
I was having this problem too. The problem ended up being that I had turned off the status messages in the printer setup. When I turned the status messages back on, a window pops up when I try to print a label. I click "Continue" and it pulls the label from the manual feed.
Chad

How can I transfer my songs from my Samsung Note 2 to the New MacBook Air?

I just got the new 2013 macbook air, but it doesn't recognize my Samsung Note 2. How can I transfer all my Songs from my Note 2 to the iTunes library in my new macbook air???

How are the song files stored on the GN2? Are they just MP3 files copied to the internal or Micro SD card storage of the GN2?

Printing on HP LaserJet P1102w from iPad2 via AirPrint: is printer supposed to have its own network?

Or is printer meant to have its own network? When I want to print, I have to disconnect my iPad2 from my 'Belkin54g' home WiFi network & connect it to the 'HP-Print-4F-LasetJet 1102' network that is listed (under 'Choose a Network' on my iPad2's Settings/WiFi page).
Once the printing has finished, I need to re-connect my iPad2 back to my Belkin WiFi network.
iPad2 shows the printer has/is on its own separate distinct WiFi network & my WiFi/Internet Router/Access Point is on its own one; both show up as such ("'HP-Print-4F-LasetJet 1102" for the printer & "Belkin54g" for the WiFi).
Please can anyone advise me if this is correct, or if I have set it up incorrectly?
And if so, where/how I would need to change this? I was going to have a look in the web-page based Config pages for the printer & my router.
Any help/advice would be gratefully received. It seems to take ages for my iPad2 to reconnect to the WiFi router once I finish printing (upto 20mins, which makes printing very time consuming, although this is probably a separate issue in itself!).
Thanks, Si.

Hi simonbond,
I understand you have a new router and are unable to setup the printer on the new network.
Thank you for your reply.
I will be happy to help you with this.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared. (hold down the x button and when the printer makes a noise let go)
After the reset, disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready.
Since the software is already installed then I would setup the wireless again by connecting the printer by USB to the computer.
Then go to start, all programs, HP, Laserjet, wireless configuration wizard, follow the steps to setup the wireless. When finished remove the USB cable.
Then try and print.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer Install failure on LaserJet P1102w

Printer was installed and worked for awhile on a Dell venue 8Pro Tablet running Win 8.1(32bit). Printer no longer wants to print nor can I get it to re-install on any computer running win8.1. I can see it on the network but each time I try to run an install it fails.

Hi maxcat1994,
Welcome to the HP Forums.
I see from your post that you are unable to install the printer on the any computer running Windows 8.1.
I will be happy to help you.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
(hold down the x button and when the printer makes a noise let go)
After the reset, disconnect the routers power cable, wait 10 seconds, then reconnect the power cable.
Restart the computers.
Run a uninstall from the CD or the program files.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Go start and select computer.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall From CD:
Go start, computer,
right click on the CD for the printer, left click open in a new window, double click on uninstall.
Run the installation again and don't connect the USB cable until prompted to configure the wireless network again.
Test the printer.
I would setup a static IP address for the printer so this won't happen again in the future.
Printer Does Not Maintain Wireless Connection. Go to Solution four: Assign your printer a static IP address.
Please let me know if you need further assistance.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My printer is a hp laserjet 1020. It is not printing anything but blank pages.

My printer is printing blank pages. Any suggestions on how to resolve this issue?

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

How do I import movies from my Samsung Note 3 into my MBP

I have a Samsung Note 3 with videos I've shot for a project... I'm trying to import them into my 15" MacBook Pro for editing in iMovie but I can't get the MBP to recognize the Samsung. I downloaded DoubleTwist--it won't help. Ideas? Thoughts?
Thanks

The samesung should show up as an external drive once it is connected by a USB cable. Just browse the files on the SS and copy them over to your Mac.
You might have to enable the SS to show as an external drive in the setting of the SS device.
This is whith my HTC phone connected to my Mac.

Help setting up a Laserjet P1102w for wireless printing on a Mac

I'm trying to setup a Laserjet P1102w on my Mac for wireless printing, but it's not working. It will print fine using USB, but all the documentation for wireless setup is for Windows, not Mac. if I connect the printer via USB to my Mac, how will it get an IP address from my wireless network? Any help appreciated.

Hi Staxofjoy,
Based on the information you provided, and comparing to another post regarding this issue (link below) - It sounds like you are running 10.7 (Lion).
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Laserjet-P1102w-driver-for-Macbook-OS-X-Li...
Please go to the linked thread above, and look for the post by mikel1004 - he outlined the steps for connecting Adhoc to the printer very clearly.
Summary of what you will need to to:
1. Reset Printer to Defaults
2. Connect to printer via Adhoc from your Mac (This will disconnect you from your home wireless network)
3. Access HTML Config, and configure the printer's wireless settings manually from there.
4. Reconnect the Mac to the Home Network
5. Add the printer to the print queue.
Hope this helps
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

HP Laserjet P1102w Printing

Hello.
I have a Mac Book Pro that I just bought over the summer, so it is the latest addition. I have been trying to print with my HP Laserjet P1102w through a USB cable and it has not been working. When I print a document, it says that the document is printing and that it finishes printing, but for some reason it doesn't actually print.
I have tried restarting both the laptop and the printer, as well as downloading the HP Laserjet software from online, but nothing seems to be working. Please help.

Hi @Maddog42 , I can help you with getting the printer to work properly on the Mac by a USB connection.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Printing a Configuration Page.
The drivers are installed by the Apple Updates. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Laserjet P1102w)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Test the printer.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet P1102w won't stop printing

I've just installed an HP Laserjet P1102w from the disk and it won't stop printing. I've disabled the bidirectional support and gotten rid of all other HP devices on my laptop but it still keeps going - just printing blank page after blank page. How can I stop this?

Hi @dionysusthewino ,
I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
Clear out the print queue on the computer.
Then power cycle the printer.
Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
If you need further assistance, please provide the results and the following information.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Surface pro giving error when printing to hp laserjet p1102w

every time i try ang print either via wireless or connected with usb i keep getting an error message. why could this be happening. ive successfully installed all the software.
any sugestions would be very much appreciated.
thank you

Hi dperomingo,
Welcome to the HP Support Forums! I understand when you try to print to your HP Laserjet p1102w you get an error message. Can you please let me know the exact error message you are getting? Have you ever been able to successfully print to your LJ 1102w? Also which Operating system are you currently running?
I would like you to go ahead and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
I will watch for your reply with the requested information, please run the PSDR and let me know the outcome!
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

IPad 2 to hp laserjet p1102w via airprint.

I wish to print to my hp laserjet p1102w, but my ipad says no airprint printers are available. I am on wifi and everything else works. The hp is working fine.

There are two issues to make this work. One, as you have discussed, you need to upgrade the firmware so the printer is truely ready to handle AirPrint. But there's a second issue that I'm stuck on. How do you get the printer on the wireless network? If you have a wireless router that supports WPS, it's apparently easy, but Apple's routers don't support WPS because it is not considered to be a secure network protocol, despite claims to the contrary.
Apple supports WPA2, which rocks in terms of wireless security, but each device that connects needs to provide the WPA2 password in order to join the network, and guess what? Printers don't have an interface through which you can send a password. My Nintendo Wii does. My iPad does. My iPod Touch Does. All my Macs do, but my wireless printer doesn't.
So, my wireless printer is connected via Ethernet to my Apple Time Capsule and it prints fine from all my Macs, but no go for AirPrint from my iOS5 devices.
<sad face>
And buying a newer printer wouldn't help because none of them connect to WPA2 networks.
<sad face>
So, if you CAN print at home via AirPrint, you might as well prepare yourself to have your wireless network hacked by your teenaged neighbor. It's only a matter of time.

How do I print a configuration page to find the printer code for my laserjet printer to eprint?

How do I print the configuration page to find the printer code for my laserjet p1102W?

Guide here:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Have MBP with OSX10.9- trying to connect HP Laserjet P1102w error msg on add printer says driver not available from apple - workarounds?

Trying to connect a new HP Laserjet P1102w printer via USB to a MBP running OSX 10.p and fully up to date. Problems getting the correct driver - does it exist and what are the workarounds?
Many thanks

Lots of information on the HP web site for this printer with Mavericks, a driver is available for 10.9. Try this web page and go from there.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=uk&dlc=en&s w_lang=&product=4110304

Hp laserjet p1102w won't print within cloud server

Please help! I have an HP LaserJet P1102w desktop printer connected via USB. It has worked fine until about a week ago when I had to have my computer wiped and the operating system reinstalled. I have Windows 7 64 bit OS. I reinstalled the printer, driver, and updated the firmware. It prints test pages and configuration pages just fine, as well as anything directly from my PC. This is an office computer connected directly to a private network using a cloud based server. I cannot print anything from within the cloud to my printer! I have looked through all of the forums and help sites and our IT people cannot assist me as this particular printer is on a list of hardware that they do not work with. As I mentioned, before the reinstallation it printed fine from the network, but now it doesn't seem to make the connection and I don't know what else to try, please help!

Hi , Thanks for posting in the HP Forums, and welcome! +I not sure I understand exactly how you are trying to print, but as this printer is wireless, I think having it connected wirelessly to your network rather than USB to a single computer, might make all the difference. I'd recommend trying the steps in this document to configure your printer wirelessly:HP LaserJet Pro P1102w - Wireless Printer Setup You'll also want to make sure your web services is enabled on the printer. 1. Print a Network Configuration Page.2. Type the IP address that shows up on your configuration page into the address bar of your browser on your computer.3. Click the tab at the top that says Web Services.4. You will have either a Setup or Enable button, click this. Hope this helps!

Printing on an HP LaserJet P1102w from a Samsung Note 10.1

Similar Messages

Maybe you are looking for