PRINTING ON CARD STOCK

When attempting to print on card stock paper, the LJ 6500 ejects the (blank) card stock paper and then prints on the second page. Yes, I know...put the card stock as the second page. But, I would like to know why the AIO ejects the first page. The driver that I am using is a E710A-F.
Your thoughts?

rak1up,
This article covers issues with blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

How do I get an Office Jet 6500A to print on Card stock?

How do I get an Office Jet 6500A to print on card stock. It pushes the card stock through the printer but will not print and tells me I have not selected the right print media. There is no selection for card stock. I have tried every selection. I assume there are other media definitions that can be downloaded but they certainly are not apparent. I have been doing this job on all my other HP printers for years. Suddenly this printer balks.

Hi,
Page #22 of the manual says (must be the same as photo paper ?):
To load cards and photo paper
1. Lift the output tray.
2. Slide the paper width guide out as far as possible.
3. Insert the media print-side down along the right of the main tray. Make sure the media aligns with the right and back edges of the tray and does not exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer.
4. Slide the media guides in the tray to adjust them for the media size that you have loaded.
5. Lower the output tray.
6. Pull out the tray extender.
And the manual is : h10032.www1.hp.com/ctg/Manual/c02519721.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Does the printer T770 print on card stock

I need to know if the printer series T770 prints on card stock. If so, where can the card stock be ordered?

Hi,
Is this the following one ?
http://www.hp.com/hpinfo/newsroom/press_kits/2010/IPEX2010/HP_Designjet_T770_Printer_DS.pdf
No, it only supports
Bond and coated papers, technical papers, films, photographic papers, backlit materials, self-adhesive materials 60 to 328 g/m²
24-in printers: 210 x 279 to 610 x 1676 mm (8.26 x 11 to 24 x 66 in) sheets; 279 to 610 mm (11 to 24 in) rolls
44-in printers: 210 x 279 to 1118 x 1676 mm (8.26 x 11 to 44 x 66 in) sheets; 279 to 1118 mm (11 to 44 in) rolls
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

OfficeJet Pro 8000 no borderless printing on card stock via Windows driver

I just setup the OfficeJet Pro 8000 wireless printer the other day with the intent to print borderless cards on card stock. I can print anything to it without issue however if I attempt to use borderless mode the Windows driver does NOT allow any paper type other than photo or glossy borchure types.
If I print anyway on card stock it looks ink soaked and muddy. If I print on their recommeded types it looks fine but a card needs heavy card stock, not med or light paper weights.
If I do not select borderless, the print (on card stock) has a dredded border but the print quality is fine.
The driver will not allow even a "normal" or "draft" borderless on standard paper types. Is there a hack or modification to allow me to print borderless on any paper?

Hello,
Please click HERE to access the steps that should resolve the issue.
You may have to try Solution Three .
. If issue still persists, please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

IPhoto '11: Horizontal lines appear across photo printed on card stock; don't appear on drafts printed on paper. How to get rid of them?

iPhoto '11: Horizontal lines appear on photo printed on card stock; don't appear on photos printed on paper or other card stock. How to get rid of them?

Horizontal lines appear on photo printed on card stock; don't appear on photos printed on paper or other card stock.
What's the difference between the first card stock and the other card stock? What's the finish on the problem card stock? What printer are you using? Does is have a physical adjustment for different stock thicknesses?

How do I set up my HP 7520 to print card stock off Avery 8859 design???

Trying to print business cards after designing on Avery 8859 card stock design. HP 7520 All in one will only print a test page of thumbnails of the business cards even though it shows the correct size, etc. for the 8859 paper.
How do I set the printer for card stock, etc. as Avery describes, and what is going wrong?? I have wasted many hours, and lots of paper, and still NO BUSINESS CARDS!!!

Hi @klmrazek,
Welcome to the HP Forums!
I noticed that you are wondering how to set up your HP 7520 to print card stock off Avery 8859 design? I am sorry for the frustration, but happy to look into this for you!
From what I can find, the card size you are using is 2" x 3 1/2". This is an unsupported paper size with this particular printer. According to your printer specifications, here are the supported card stock sizes:
Card type
Card size
3 x 5 in Index
76.2 x 127 mm (3 x 5 in)
4 x 6 in Index
101.6 x 152 mm (4 x 6 in)
5 x 8 in Index
127 x 203.2 mm (5 x 8 in)
However, you might be able to get around this by assigning an alternate driver, by going through this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R. Then try a custom size print by going through this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
Otherwise, I would suggest a different size of paper, within your supported sizes using the chart provided. Or you can also try contacting Avery Support, in case they may have additional software or drivers that you can try.
Hope this information is helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing card stock on officejet6700

when i try to print on card stock ie wedding invitations on my officejet 6700 ,the stock jams. I set the printer preferences to
card stock but it still jams. any suggestions to overcome this problem.

Hi,
One reason: could be the cards are too thick (weight) have you tried thinner cards ? The following image hows supported medias:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Photosmart 5514 prints blank on card stock

I only get a blank page when I try to print on card stock. It feeds the card and sounds like it's printing but then comes out blank. I've changed the print settings to 5.5" x 8" and to 'matte greeting card'. It prints fine on regular paper but when I try the same thing with a card it comes out blank. I have just changed all the print cartridges. I have tried printing from PowerPoint, from my mail, and from a jpeg file; and all work on regular paper but come out blank on the cards. Any suggestions? I should also mention that I'm using a MacBook Pro computer with OSX 10.7.5 and connected to my printer wirelessly through my home wi-fi network.

Hi , Welcome to the HP Forums! I noticed that you cannot print on card stock with your HP Photosmart 5514 on Mac OS X 10.7, and I am happy to look into this for you! According to your printer's specifications, this is an unsupported paper size for card stock paper. The supported sizes are as follows: Card typeCard size3 x 5 in Index76.2 x 127 mm (3 x 5 in)4 x 6 in Index101.6 x 152 mm (4 x 6 in)5 x 8 in Index127 x 203.2 mm (5 x 8 in) You might be able to try a custom size print, and you could try this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5510 e-All-in-One Printer Series. But if it is printing on regular paper, then it must something wrong with the card stock paper that you are using. Perhaps, also try taking out the paper and re-loading it might help, and maybe try flipping the paper upside down, in case the wrong side up is being loaded. Otherwise, I would suggest to try one of the supported card sizes that I mentioned in the chart above. Hope this information helps! “Please click the Thumbs up icon below to thank me for responding.”

My printer will not recognize greeting card stock and I cannot use card programs.

I have changed all of the necessary thing when loading card stock into the printer, and yet the printer asks for paper. It doesn't recognize the card stock and I cannot use any of my greeting card programs.

You are not alone with this issue. I wish that HP would accept the fact that printing with card stock is an issue that needs to be addressed and corrected. My Officejet 8600 Plus will not pick up nor print any weight (67 or 110) card stock. It is listed in their specifications that it will! Neither Best Buy or Office Depot could get their display units to print card stock either. Under troubleshooting they list a series of steps that do not apply to the basic problem. When trying to print to card stock you receive a "Out of Paper" error message. It is a known issue and not being addressed. I just posted this same problem so will see what comes back and stay in touch.

Can our hp laserjet enterprise 500 color printer m551use 67lb card stock?

The printer specifications list card stock but no weights.
This question was solved.
View Solution.

Hello,
the required media weight is not supported by the printer.
As you may find listed within the Media Weight specification below, the printer support up to 58 lb media.
Media weight:
Tray 1: 16 to 58 lb (plain); 28 to 58 lb (glossy);
Tray 2: 16 to 43 lb (plain paper); 28 to 58 lb (glossy paper)
You may find the product specification below:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328060-15077-236268-4184772-4184773-41847...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet pro 8600 will not print card stock

I just purchased the Officejet Pro 8600 and cannot print card stock. I read another HP troubleshooting page and tried to run 100 copies of blank paper through to "calibrate" the printer as suggested by HP technical support. There was a suggestion to disconnect the tray 2 paper tray but I also don't a tray 2. Any suggestions? I print card stock regularly.

Hi breannemk,
Welcome to the HP Support Forums! I understand you are not able to print card stock on your HP OfficeJet 8600, can you please let me know the Exact model of 8600 you are using as well as the Operating system you are running. Do you get error messages when you try to print them, if yes, please let me know the error messages you run into?
Please reply back with the requested information so we can begin troubleshooting.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trying to print invitations on custom sized card stock - like a postcard

Trying to print invitations on 8.5 x 5.5 card stock (like a postcard) and I cannot change the paper to a custom size.
When printing from the software, Print Artist Platinum 24, which has the correct size paper, the printer thinks I want to print an envelope.
How do I get the printer to print on the custom paper correctly?

My custom settings.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Print quality on card stock

I have a batch of Georgia-Pacific white card stock, 110 lb. weight. My printer is an HP Photosmart D5460. What is the best print setting to maximize the quality of color photos printed with this printer on this medium? Thanks for any suggestions anybody has.

Print in best mode, and use either premium inkjet paper, or brochure media, matte. The key is that you are not printed on a coated media, but simply paper pulp. Also, your media is whiter than regular plain paper, so you want to use either of the two aforementioned, as the colors they put down are assuming good bright paper.
Hope that takes care of you!
Regards, CF
I work for HP and hope to make your day Sproutastic!

How do I get my Officejet Pro 8500A to print card stock?

How do I print card stock?

Hi Jeff1212,
Review the following link which has the specifications regarding paper handling. If you have a card stock which is supported try cleaning the paper pickup rollers.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02173269&tmp_task=prodinfoCategory&cc=us&dlc=en...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

F4280 Print Alignment Issues on Business Card Card Stock

I have a Deskjet F4280 All-in-One series printer. Two weeks ago I printed 250 business cards (front and back) on the printer and everything aligned perfectly. Today I've gone through page after page trying to print again and every time I print a page, the alignment is different! It seems to work properly on regular paper but when trying to print on the same exact card stock I used two weeks ago, every page starts in a different place and / or is skewed on the page. Any suggestions?

SOLVED! Try this fix! The key is to fool the printer software into thinking it's printing on plain, not expensive glossy or heavy weight paper. http://h30434.www3.hp.com/t5/Other-printing-questions/Solved-All-in-Ones-Misalignment-on-Costco-or-H...

PRINTING ON CARD STOCK

Similar Messages

Maybe you are looking for