Printing on cardstock

I have the Photosmart C6280 All-In-One and it doesn't like printing on cardstock - jams. Any tricks I should know, or am I just out of luck. HELP

I have the same problem with my HP psc 1300 all-in-one. In fact, I can't get it to print reliably on anything but plain inkjet bond paper. All the other paper options listed in the print window are useless -- photo, cardstock, whatever. I've been trying all day to print on Avery 8387 postcard stock. It prints the first two lines, then claims there is a jam, and ejects the paper. I see by the date on your query, and the date on some of the other queries, that many of these questions go unanswered for days, months, and even years. It would be nice if HP would occasionally read through these posts and contact their customers with some suggestions! I'm about ready to throw this printer in the trash and buy and Epson -- or something that really will do what it says it will do!

Similar Messages

Wont print on cardstock

i can not get this printer to print on cardstock.what am i doing wrong.regular paper yes,cardstock no.please help????

Hi,
Please check the thickness (called weight) of those cards.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing on cardstock paper using c4150 all in one

I don't know if my printer will print on cardstock paper. Does anybody know? Thanks

Hi there mamapj,
This article has the paper specifiactions for your printer. Check the intended card stock against those shown here for compatibility.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Print on cardstock HP deskjet F4400

wanting to print on cardstock, adjusted paper to matte cardstock setting, cardstock rolls through printer
but doesn't print on it.

Hi,
How do you connect your printer now ? Based on the following information, it only has USB connection:
http://www.hp.com/hpinfo/newsroom/press_kits/2009/ecosolutions/reduceimpact/HPDeskjetF4400Factsheet....
Support/Connectivity
o
High Speed USB 2.0
No driver for Chromebook for USB connection. Please try:
http://www.cnet.com/au/how-to/how-to-print-from-a-chromebook/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printer for cardstock?

Can anyone recommend a printer for thick cardstock? I am planning to make custom bicycle playing cards and I want to print directly onto the card.
what I am looking for:
a printer that loads paper from the top, front or rear doesn't matter as long as it has a straight path and doesn't bend the paper.
inkjet
prints to cardstock
under $200 if possible
ink that isn't expensive to replace
Thanks for any help!!

Anyone ???

Unable to Print on CardStock. I am using the HP 8600 Premium AIO

Printer : HP 8600 Premium AIO
I have bought the printer yesterday and I have changed the printer setting to use Card Stock. Still it does not print.
Please help.
Thank you,
Best regards,
Soumitra

Travis,
I have tried the solutions below from the link
Solution one: Restart the All-in-One
- I have done this a couple of times. Regular paper prints fine.
Solution two: Check the condition of the paper, and then reload it
- Just purchased the paper with the printer. I have tried to loosen them, sometimes it helps.
Solution three: Clean the paper rollers
- Brand new printer, it has barely printed 25 sheets. Also regular paper prints like a breeze.
Solution four: Reset the All-in-One
- Tried this, regular paper prints. Cardstock is still not printing
Solution five: Adjust the paper settings in the print driver
- I have done this. It was mentioned in one of the posts that the rollers need to adjust to pick up thicker paper.
( I wish I could attach the images, but not able to get the popup to add the images)
Solution six: Service the All-in-One
- Trying to avoid this for now.
Thank you,
Best regards,
Soumitra

Advice on printing to cardstock

I have a new CM1312nfi MFP and am trying to print some invitations on cardstock 5"x8" sheets.
I have loaded the sheets in the tray similar to how envelopes are loaded.
After each page, the printer goes through a cleaning cycle for several minutes.
Also, an error "Unexpected page size detected. Click OK to continue" comes up.
This is frustrating, and so is HP's tech support -- any tips on how to print to cardstock?
Thanks!

I think you would know how to retrieve content of an HTML page using the URL object. Just in case.
My apology if this short note doesn't help you at all.

Printing on cardstock wih Officejet 5745

I need to print heavy cardstock invitations 5 X 7. I worry the paper will either jam or refuse to make the turn. Solutions?

Hi @Ole-Prof,
Welcome to the HP Forums!
I noticed that you are trying to print on heavy cardstock invitations 5 x 7 with your HP Officejet 5745. I am happy to look into this for you!
According to your printer's specification's, this is an unsupported paper size for this printer. The supported card sizes are:
Paper type
Paper size
A4 index card
210 x 297 mm (8.3 x 11.7 inches)
A6 card
105 x 148 mm (4.1 x 5.8 inches)
Borderless A6
105 x 148 mm (4.1 x 5.8 inches)
Borderless Hagaki*
100 x 148 mm (3.9 x 5.8 inches)
Hagaki*
100 x 148 mm (3.9 x 5.8 inches)*
Index card
76 x 127 mm (3.0 x 5.0 inches)
Index card
89 x 127 mm (3.5 x 5.0 inches)
Index card
101 x 152 mm (4.0 x 6.0 inches)
Index card
127 x 203 mm (5.0 x 8.0 inches)
Index Card Letter
200 x 148 mm (7.8 x 5.8 inches)
Japanese postcard
100.1 x 148.1 mm (3.94 x 5.83 in)
Hagaki*
200 x 148 mm (7.8 x 5.8 inches)
*The printer is compatible with plain and inkjet Hagaki from Japan Post only. It is not compatible with photo Hagaki from Japan Post.
However, If you are using Windows 7 and above, you might be able to assign an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R, and then trying a custom paper size. Otherwise, I would suggest to use one of the supported paper sizes mentioned in the chart above.
Hope this information clears things up for you, and thank you for posting!
“Please click the Thumbs up icon below to thank me for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printer turns cardstock black

I have a hp 2600n printer and when I print cardstock the cards come out with a black tint covering the entire card.
I already changed the settings on the printer to cardstock setting yet it hasnt solved the problem fully.
Does anyone know how to solve this problem? ( i hope my cards arent too thick)
Thanks

Hi dh1234,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Color LaserJet 2600n Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Color LaserJet 2600n Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing heavy cardstock

For the last few years, I have been helping out friends with wedding and party invitations. I would like to start doing this on a bit bigger scale now that I am a stay-at-home mom with our new baby. I currently have a run of the mill HP inkjet printer that has a hard time handling cardstock over 110 lbs. I also have a problem with drying time and smearing when it comes to printing on smooth paper like shimmer paper or vellum. So, I thought maybe a laser printer was the way to go, but I see they only use paper specific for them. With that in mind, can anyone recommend a good printer that will handle cardstock greater than 110 lb.? The last invites I did used 150 lb. cardstock. Thanks!

Hello pennsylvaniakat,
Welcome to the HP Consumer Printer Forums.
I think your best chance to find the answer you are looking for would be to call 1 (888) 999-4747. They can do a "needs analysis" for you and direct you to the right product.
Alternatively, you can visit HERE to check out what is available.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How Do I print on Cardstock - size 4.7" x 7.8"

I am trying to print wedding invitations and the the paper type should be set to Cardstock or Heavyweight. Neither of these options are in this printer's list for the paper type. Are these paper types configurable in another way to be used on this printer?

Afternoon , I may be able to help you with printing your invitations with your Officejet Pro 6830. PLEASE NOTE: This is not guaranteed to work from Windows, it usually ends up being a limitation of the operating system presets. I found these documents that may offer additional assistance;Creating Custom Paper SizesChanging Print Settings in Windows 8 Plus these instructions from the User Guide for your printer;Print on special and custom-size paperIf your application supports custom-size paper, set the size in the application before printing the document. If not, set the size in the printer driver. You might need to reformat existing documents to print them correctly on custom-size paper. To set up custom sizes (Windows)1. Depending on your operating system, do one of the following:● Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices and printers. Click or tap the printer name, and click or tap Print server properties. ● Windows 7: From the Windows Start menu, click Devices and Printers. Select the printer name, and select Print server properties. 2. Select the Create a new form check box. 3. Enter the name of the custom size paper. 4. Enter the dimensions of the custom size in the Form description (measurements) section. 5. Click Save Form, and then click Close. To print on special or custom-size paper (Windows) NOTE: Before you can print on custom-size paper, you must set up the custom size in the Print Server Properties.1. Load the appropriate paper in the tray. For more information, see Load paper. 2. From the File menu in your software application, click Print. 3. Make sure your printer is selected. 4. Click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences. NOTE: To set print settings for all print jobs, make the changes in the HP software provided with the printer. For more information on the HP software, see Printer management tools. 5. On the Layout tab or Paper/Quality tab, click the Advanced button. 6. In the Paper/Output area, select the custom size from the Paper Size drop-down list. NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the paper size on the printer control panel to match. 7. Select any other print settings that you want, and then click OK. 8. Click Print or OK to begin printing. The above document doesn't have screen shots on how to adjust the paper settings in the print driver. But I found Printing and Changing Print Settings (Windows) with images. I copied them here for you; On your computer, open the document or photo that you want to print, click File, and then click Print.From the print dialog window, click Properties.
NOTE: Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer Properties, Printer, or Preferences.Select the Paper/Quality tab.From the Paper Source drop-down menu, select the paper tray.
Figure : Paper Source
From the Media drop-down menu, select your paper type.
NOTE: This may take some experimenting - try different ones until you find one that works. If there is an HP Advanced Photo Paper - try it first.
Figure : Media drop-down menu
To choose the paper size, click Advanced.
From the Paper/Output selection, open the Paper Size drop-down menu.
Figure : Paper Size drop-down menu ** You should be able to select the one you have created.
Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

OfficeJet Pro 8600 won't print cardstock

Ok I read through all of the tried and true solutions on the board and the kicker for me was turning off the Tray 2. Once I did that - it printed the cardstock. When you think about it - it just doesn't make sense and stupid. I was almost ready to take this printer back. I spent some good money on this printer and I am upset that I have to change the settings to use it. REALLY HP? Fix the driver and send out the disk or download to all who have a registered printer. This is ridiculous and if someone is going to pay this amount of money for a printer, don't you think your customers deserve better? And yes we do deserve better. I'll keep this one for now but in the future I will probably go another manufacturer.

This would be a firmware issue, and since this is an issue that I have seen before and has been present on the forums there is a good chance that it will be addressed in a firmware update or in a printer update If and when that happens I will be sure that the information gets posted as soon as possible.
-Spencer

HP 8600 pro officejet would feed and print cardstock. need and solution b4 i return it!

I have changed the settings and it still will not feed thru. When I pull out the try it the paper is lifed up and sittting on the edge but just did not get picked up. I need this to work, otherwise I'm taking it back.

HP has recently released a firmware update for the 8600 series printer. The firmware has several product fixes/enhancements. Below is the list:
1) Enhance ePrint Diagnostic report for ePrint Setup
2) Improve ease of wireless setup
3) Enhanced Embedded Web Services
4) Improve Print Quality
5) Improve Ink Usage
6) Improve paper path performance
7) Improve Digital scan performance
The firmware version is CLP1CN1304AR and was released 2013-03-21.
As mentioned in 6), the paper path performance has been improved and this was directed at printing with Cardstock/Photo Paper in the 8600.
There are 3 different versions of the 8600 and I will provide links below to the download page for this firmware update for each.
8600 Base (N911a or CM749a)
8600 Plus (CM750a or N911g)
8600 Premium (N911n or CN577a)
For information about how to perform a firmware update in the 8600 click the link below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02919168&cc=us&dlc=en&lc=en&product=4323648&tmp...
Let me know the results of updating the firmware and differences with the product's capacity to handle Cardstock/Photo Paper.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Can't print small documents

I have three printers a Color LazerJet CM2320 MFP Series PCL6, a DeskJet 9800 and a OfficeJet 7400. I am trying to print RSVP cards for my daughter's wedding and they are getting stuck in all three printers. The cards are 3.1/2 X 4.7/8 inches. Is there anything I can do with these printers or is there another printer that I could purchase than will print light cardstock that size?

The Deskjet 9800 should handle those through the front manual feed slot.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How do i get my hp deskjet 1050 to print on thick paper?

I have started my own Card Making Business and was wondering if I can print on Cardstock (thicker paper) with my HP Deskjet 1050

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
iFelix

Printing on cardstock

Similar Messages

Maybe you are looking for