Printing on envy without internet

How to print if Internet is down

HI Nicktown,
I see that you're trying to print. I have a couple of questions for you. Are you trying to print from a mobile device? What version Envy printer do you have?

Similar Messages

How to hook up printer without internet

I am woundering how I can connect wirelessly to my HP ENVY 4500 printer with my HP laptop(windows 8.1) without internet? the printer did not come with a USB cord to connect directly.

You don't need the internet to connect any printer. I would just go out and buy a Printer USB cable. Make sure it is a Printer USB cable and not a standard USB. Of if you have a router you can connect it, or if the printer supports Wireless Direct you can connect without a cable. Read your manual for your options.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

If I own Photoshop Elements 5.0 on an old computer without internet access, how do I open the image

If I have Photoshop Elements 5.0 on an old computer without internet access, how can I open the image I created so I can print it? The new computer with internet is not the one I have registered the Photoshop product.
Thanks.
Eddie

Hi eddie
If you saved the image on the old computer as a project or a PSD file it will only open in Elements. The best thing to do is make another copy and then transfer it to the flash drive.
If you open the saved collage in the PSE5 Editor you can click the top menu Layer à Flatten Image
Then click File à Save As and choose jpeg.
Copy the jpeg to the flash drive and then plug it into the new computer and drag the jpeg collage to Pictures or another folder.

Unable to print pages directly from Internet.

I can print documents from my iPad without any difficulty, so it's not an issue of connectivity or compatibility. (I have the new Retina Display and the printer is a HP Photosmart 7520.) it's just if I need to print something off the Internet and a 'print' icon or some-such is shown on the webpage, it just doesn't work. (It will work on
the laptop, so the issue isn't with the printer.) Any ideas or suggestions?
(I have tried to copy it and paste it into Pages, but the formatting goes completely skew-whiff and it's such a hassle. Shouldn't be that difficult!)
Thanks for your help!

If you are using Safari - and I assume that you are - clear Safari, restart the printer and the iPad and then try again. I have the same printer and as an experiment I just printed 5 pages for an Internet article.
Go to Settings>Safari>Clear Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Even though everything else is working, sometimes it helps to power cycle your router. Unplug it for about 30 seconds and plug it back in again.
If none of that works, reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Printer won't print anything from the internet

Had a hp officejet 4500 printer and now have a HP ENVY 4500 e-ALL-in-On series and neither one will print anything from the internet.
Any ideas on what to check ?????

Hi dukster,
I'll see if I can find anything for you. What kind of computer and OS do you have? A Mac or a PC? Also, what browsers are you trying to print from?
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Install 2nd instance of Arch Linux without internet connection

I have successfully install a first instance of Arch Linux using Arch Linux ISO + pacstrap + pacman with internet connection.
I have updated to latest package database list (/var/lib/pacman/sync) and package cache files (/var/cache/pacman/pkg) in first instance of Arch Linux with "pacman -Swyu".
Next, I would like to install 2nd instance of Arch Linux without using internet connection.
I share the "/var/lib/pacman/sync" and "/var/cache/pacman/pkg" via NFS from first Arch Linux instance.
I boot the 2nd instance with Arch Linux ISO and attempt to install without internet connection. I mount the two NFS shares from 1st instance to "/var/cache/pacman/pkg" and "/mnt/var/lib/pacman/sync" respectively. I execute
# pacstrap -i -c /mnt"
to start installation.
I found it is almost impossible with current implementation of pacstrap script. The pacstrap script always attempt to update package database list with -Sy option.
I think some amendments on pacstrap script is needed to install Arch Linux without internet connection.

I made the edit by adding the option -o to do what you want.
I am too lazy for a feature request right now...
#!/bin/bash
# Assumptions:
# 1) User has partitioned, formatted, and mounted partitions on /mnt
# 2) Network is functional
# 3) Arguments passed to the script are valid pacman targets
# 4) A valid mirror appears in /etc/pacman.d/mirrorlist
shopt -s extglob
out() { printf "$1 $2\n" "${@:3}"; }
error() { out "==> ERROR:" "$@"; } >&2
msg() { out "==>" "$@"; }
msg2() { out " ->" "$@";}
die() { error "$@"; exit 1; }
in_array() {
local i
for i in "${@:2}"; do
[[ $1 = "$i" ]] && return
done
track_mount() {
mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
api_fs_mount() {
CHROOT_ACTIVE_MOUNTS=()
{ mountpoint -q "$1" || track_mount "$1" "$1" --bind; } &&
track_mount proc "$1/proc" -t proc -o nosuid,noexec,nodev &&
track_mount sys "$1/sys" -t sysfs -o nosuid,noexec,nodev &&
track_mount udev "$1/dev" -t devtmpfs -o mode=0755,nosuid &&
track_mount devpts "$1/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
track_mount shm "$1/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
track_mount run "$1/run" -t tmpfs -o nosuid,nodev,mode=0755 &&
track_mount tmp "$1/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
api_fs_umount() {
umount "${CHROOT_ACTIVE_MOUNTS[@]}"
valid_number_of_base() {
local base=$1 len=${#2} i=
for (( i = 0; i < len; i++ )); do
(( (${2:i:1} & ~(base - 1)) == 0 )) || return
done
mangle() {
local i= chr= out=
unset {a..f} {A..F}
for (( i = 0; i < ${#1}; i++ )); do
chr=${1:i:1}
case $chr in
[[:space:]\\])
printf -v chr '%03o' "'$chr"
out+=\\
# fallthrough
out+=$chr
esac
done
printf '%s' "$out"
unmangle() {
local i= chr= out= len=$(( ${#1} - 4 ))
unset {a..f} {A..F}
for (( i = 0; i < len; i++ )); do
chr=${1:i:1}
case $chr in
if valid_number_of_base 8 "${1:i+1:3}" ||
valid_number_of_base 16 "${1:i+1:3}"; then
printf -v chr '%b' "${1:i:4}"
(( i += 3 ))
fi
# fallthrough
out+=$chr
esac
done
printf '%s' "$out${1:i}"
dm_name_for_devnode() {
read dm_name <"/sys/class/block/${1#/dev/}/dm/name"
if [[ $dm_name ]]; then
printf '/dev/mapper/%s' "$dm_name"
else
# don't leave the caller hanging, just print the original name
# along with the failure.
print '%s' "$1"
error 'Failed to resolve device mapper name for: %s' "$1"
fi
fstype_is_pseudofs() {
# list taken from util-linux source: libmount/src/utils.c
local -A pseudofs_types=([anon_inodefs]=1
[autofs]=1
[bdev]=1
[binfmt_misc]=1
[cgroup]=1
[configfs]=1
[cpuset]=1
[debugfs]=1
[devfs]=1
[devpts]=1
[devtmpfs]=1
[dlmfs]=1
[fuse.gvfs-fuse-daemon]=1
[fusectl]=1
[hugetlbfs]=1
[mqueue]=1
[nfsd]=1
[none]=1
[pipefs]=1
[proc]=1
[pstore]=1
[ramfs]=1
[rootfs]=1
[rpc_pipefs]=1
[securityfs]=1
[sockfs]=1
[spufs]=1
[sysfs]=1
[tmpfs]=1)
(( pseudofs_types["$1"] ))
newroot=/mnt
hostcache=0
copykeyring=1
copymirrorlist=1
offline=0
usage() {
cat <<EOF
usage: ${0##*/} [options] root [packages...]
Options:
-C config Use an alternate config file for pacman
-c Use the package cache on the host, rather than the target
-d Allow installation to a non-mountpoint directory
-G Avoid copying the host's pacman keyring to the target
-i Avoid auto-confirmation of package selections
-M Avoid copying the host's mirrorlist to the target
-o Do not update the pacman cache for offline installation
-h Print this help message
pacstrap installs packages to the specified new root directory. If no packages
are given, pacstrap defaults to the "base" group.
EOF
if [[ -z $1 || $1 = @(-h|--help) ]]; then
usage
exit $(( $# ? 0 : 1 ))
fi
(( EUID == 0 )) || die 'This script must be run with root privileges'
while getopts ':C:cdGiMo' flag; do
case $flag in
C)
pacman_config=$OPTARG
d)
directory=1
c)
hostcache=1
i)
interactive=1
G)
copykeyring=0
M)
copymirrorlist=0
o)
offline=1
die '%s: option requires an argument -- '\''%s'\' "${0##*/}" "$OPTARG"
die '%s: invalid option -- '\''%s'\' "${0##*/}" "$OPTARG"
esac
done
shift $(( OPTIND - 1 ))
(( $# )) || die "No root directory specified"
newroot=$1; shift
pacman_args=("${@:-base}")
if (( ! hostcache )); then
pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
fi
if (( ! interactive )); then
pacman_args+=(--noconfirm)
fi
if (( ! offline )); then
pacman_args+=(-y)
fi
if [[ $pacman_config ]]; then
pacman_args+=(--config="$pacman_config")
fi
[[ -d $newroot ]] || die "%s is not a directory" "$newroot"
if ! mountpoint -q "$newroot" && (( ! directory )); then
die '%s is not a mountpoint!' "$newroot"
fi
# create obligatory directories
msg 'Creating install root at %s' "$newroot"
mkdir -m 0755 -p "$newroot"/var/{cache/pacman/pkg,lib/pacman,log} "$newroot"/{dev,run,etc}
mkdir -m 1777 -p "$newroot"/tmp
mkdir -m 0555 -p "$newroot"/{sys,proc}
# always call umount on quit after this point
trap 'api_fs_umount "$newroot" 2>/dev/null' EXIT
# mount API filesystems
api_fs_mount "$newroot" || die "failed to setup API filesystems in new root"
msg 'Installing packages to %s' "$newroot"
if ! pacman -r "$newroot" -S "${pacman_args[@]}"; then
die 'Failed to install packages to new root'
fi
if (( copykeyring )); then
# if there's a keyring on the host, copy it into the new root, unless it exists already
if [[ -d /etc/pacman.d/gnupg && ! -d $newroot/etc/pacman.d/gnupg ]]; then
cp -a /etc/pacman.d/gnupg "$newroot/etc/pacman.d/"
fi
fi
if (( copymirrorlist )); then
# install the host's mirrorlist onto the new root
cp -a /etc/pacman.d/mirrorlist "$newroot/etc/pacman.d/"
fi
# vim: et ts=2 sw=2 ft=sh:

Print crystal report without preview

Dear All,
i want print crystal report without preview.
when i click print button i want show printer list install in that computer.
so user can choose which printer that use to print. I means like if we printing document from office, we can choose the printer.
how that i can do that?
please help.
best regards,
Surbakti

Since this issue has little to do with sql server, I suggest you post your question to a forum for CR
SAP CR community

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

Print HTML doument without open it from an applet

I need to know how I can print an HTML document from an applet developed with Jbuilder 4. I'm not a very expert developer and I need a detailed information about this problem. Important is that the HTML document is printed without open it.
I use: win 2000 pro
J2RE 1.4.0
thanks in advance for your help
Mauro Losa

Thanks for your help but my problem is that i want print the document without display it.
I think to have find a solution using Java Print Service API (JDK 1.4) but when i run the example the system display this error refered to this instruction
"PrintService[] pservices = PrintServiceLookup.lookupPrintServices(flavor, aset);":
java.lang.UnsatisfiedLinkError: getDefaultPrinterName
at sun.print.Win32PrintServiceLookup.getDefaultPrinterName(Native Method)
at sun.print.Win32PrintServiceLookup.getDefaultPrintService(Unknown Source)
at sun.print.Win32PrintServiceLookup.getPrintServices(Unknown Source)
at sun.print.Win32PrintServiceLookup.getPrintServices(Unknown Source)
at javax.print.PrintServiceLookup.getServices(Unknown Source)
at javax.print.PrintServiceLookup.lookupPrintServices(Unknown Source)
at untitled4.applet1.main(Applet1.java:32)

Print Report RDLC without preview ... very important for me.

Hello, I want to ask you about print Report RDLC without preview .
I saw this article here :
http://msdn.microsoft.com/en-us/library/ms252091.aspx
but I did not understand because the code is long and I think difficult.
could you put simple code please?
Thanks a lot.

Would that fix this mod_jk problem? Do you mean to say that I have those permissions when I actually edit those files?
I think the wiki is also mistaken assuming that JAVA_HOME is in the /opt directory.

Print a file to printer wirelessly and without need to use CD drive to install driver?

I have a HP-P1006 printer in my conference room and sometimes my guest want to send print to my printer and I have to connect their laptop with USB cable to my printer and install printer driver thought CD Drive. I want to know if there is a way to print a file to printer wirelessly and without need to use CD drive to install driver? (I don't have a wireless network in my conference room)

Is it possible to automate Adobe Reader to load files, then set the staple property and location, then print them out? I've seen in .NET 3.0 that there is a Enumeration for Stapling in the System.Printing Namespace. I need to figure out how to automate the printing in adobe but right before it prints, have .NET assign the printer and whether it should be stapled or not.

How can I transfer all of my music library from my iTunes library on my PC to my iPhone without Internet connection will filesharing for home sharing allow me to access my iTunes library from my iPhone if I do not have Internet access on my PC

How can I transfer music from my home PC in my iTunes library to my iPhone for without Internet access will home sharing allow me to access my iTunes library from my iPhone 4 without Internet

Why don't you just sync it to your phone?

If I download Mountain Lion on my MBP , can I use the same installer file on a different computer and continue the installation without Internet connectivity?

Hi Folks,
I have just downloaded Mountain lion on my Macbook Pro(haven't installed it yet) . My question is, can I copy the same downloaded Mountain Lion from the Applications on to an external hard drive and use the same on a different computer? I am having problems with internet connectivity right now, it would be amazing if it can be installed on the iMac without internet connection.
So is that doable?
Thanks in advance

And the 2nd installation would not require internet connectivity? Except , of course during the set up and the configuration of iCloud and location based services, which I can skip at the time

Connecting 2 computers thru Time Capsule without Internet?

I had started a question in another area (Mountain Lion) because I am trying desperately to migrate a Windows PC running Windows 7 to a new iMac. The Migration assistant on both computers does not find any computers. The Apple Care people say I am doing everything right, but now some people online are saying that I can't do this wirelessly thru Time Capsule (which we have and is the router for our office which the PC is connected to wirelessly).
The new Mac is in set up beginning mode (meaning it has not been set up wirelessly or anything yet), because on launch it offers to move the data from the PC to set up the new Mac. It is stuck "looking for a computer"
Here is the whole discussion:
https://discussions.apple.com/message/23377824#23377824
Today I went by an Apple store to ask their opinion and the guy told me that I can't connect the 2 computers via ethernet (even though that is what the Migration insturctions say to do), but he said that I shoud be able to connect each computer via ethernet to the Time Capsule and have them recognize each other.
Does this sound right to any of you???
The PC is clear across the room and no where near the internet line, so I would either have to buy a REALLY long ethernet cable to drag over to it, or take the whole computer apart to try and get it near the TC. The mac of course is no problem to move.
I just don't want to do all this if this will not really act as a network (I guess as a server of sorts).
I am confused as the TC manual says that it can be used without internet, but I don't seehow (I've tried rebooting it without a connection). I do not know why the internet is involved at all since what we need is the TC to act as a wireless router (which it is) and do not need to involve the internet at all to link the 2 computers.
I am just totally frustrated that these computers should just communicate wirelessly and/or with each other somehow and do not seem to, as Apple says they should. I know this will turn out to be something really simple and dumb and I'm just not seeing it.
Is it not possible to take the TC and reboot it with the 2 computers connected to it and create a network using the TC as a server or router without needing any internet just so I can get this stuff from the PC migrated (and then never have to deal with it again!!!!)
Any help is greatly appreciated.
Thanks!

I think where the confusion lies is that this is a brand new Mac and NEVER been set up. We are trying to Migrate from the Windows on initial setup - which is what the Mac asks you when you first start it: Language, Keyboard (english) and then if you are setting a New Mac or wanting to tranfer your info to set up from another Mac or from a PC. You choose PC and the MA automatically looks for the other PC. The Windows MA does the same thing. You launch it on the PC and it looks for the Mac to connect to.
They are not "finding" each other - even when connected directly via the ethernet cable to each other as dictated by the MA instructions (see the link you provided and click:
Transferring with the Setup Assistant that appears when your Mac starts up for the first time
This is what I am doing. This is what 2 different guys from Apple Care also said was correct.
They do not communicate. This is why some in the ML discussion area are telling me I can't do this with an ethernet cable even though these are the instructions. They are telling me to use the TC as a router between them.
The PC is already wirelessly connected to the TC but when I connect the Mac to the TC it still does nothing (because I assume it hasn't been "set up" yet to the wireless network).
I did not want to set up the Mac initially on its own because then you create a User and Password and when you migrate it creates a second User and will not migrate into the initial one you set up, ergo you forever are stuck with 2 users on login and 2 sets of stuff taking up space in your Mac.
It should do this on start up. I have NO doubt this is a PC issue, even though I disabled everything I could possibly see to do on it (this is why I need the PC geek in the UK to make sure). The Apple techs have told me some people have to disable and reboot this stuff several times (ARGH!) LOL!
Anyway I did wonder when I tried yesterday to simply take TC off the internet connection and set it up on its own, I could never get it to stop looking for internet (I rebooted it and reinstalled it with a new name and password), but when you look at it in Airport Utility (I'm using a Macbook for the set up), you see it still blinking looking for internet.
I could not find any instructions for someone to use the TC as a router only or as a server, even though you can see there are more choices in the AU setup tabs. The one guy at the Apple store (not Apple Care) said that if I connected the 2 computers to the TC it would act as a router and they could "see" each other for me to setup - but this did not work, hence I came here.
Hope I'm making sense! Thanks so much for your help.

Printing on envy without internet

Similar Messages

Maybe you are looking for