Printing on HP LaserJet P1102w from iPad2 via AirPrint: is printer supposed to have its own network?

Or is printer meant to have its own network? When I want to print, I have to disconnect my iPad2 from my 'Belkin54g' home WiFi network & connect it to the 'HP-Print-4F-LasetJet 1102' network that is listed (under 'Choose a Network' on my iPad2's Settings/WiFi page).
Once the printing has finished, I need to re-connect my iPad2 back to my Belkin WiFi network.
iPad2 shows the printer has/is on its own separate distinct WiFi network & my WiFi/Internet Router/Access Point is on its own one; both show up as such ("'HP-Print-4F-LasetJet 1102" for the printer & "Belkin54g" for the WiFi).
Please can anyone advise me if this is correct, or if I have set it up incorrectly?
And if so, where/how I would need to change this? I was going to have a look in the web-page based Config pages for the printer & my router.
Any help/advice would be gratefully received. It seems to take ages for my iPad2 to reconnect to the WiFi router once I finish printing (upto 20mins, which makes printing very time consuming, although this is probably a separate issue in itself!).
Thanks, Si.

Hi simonbond,
I understand you have a new router and are unable to setup the printer on the new network.
Thank you for your reply.
I will be happy to help you with this.
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared. (hold down the x button and when the printer makes a noise let go)
After the reset, disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready.
Since the software is already installed then I would setup the wireless again by connecting the printer by USB to the computer.
Then go to start, all programs, HP, Laserjet, wireless configuration wizard, follow the steps to setup the wireless. When finished remove the USB cable.
Then try and print.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • How can I email a photo from ipad2 via 3G?  It just shows turning gear and says sending, but doesn't go.  Also, am I not able to use face mail via 3G?

    How can I email a photo from ipad2 via 3G?  When try, only see spinning gear and it says sending, but it never goes.  Also, can facetime be used via 3G?

    Limnos wrote:
    I know somebody with an iPhone and we were told Facetime requires a wi-fi network connection.
    It is on the man. page 45
    Limnos wrote:
    FaceTime works only on WiFi.
    Correct, as I earlier intimated.  It is to stop you from burning through your 3G data limit.
    It won't since it only works on Wifi.

  • I can't get my HP laserjet p1102w to work with airprint

    Hi!
    So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
    I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

    Hey T-racer,
    As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
    You can find more info on it here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
    It shares many of the same capabilities of airprint but is a different program/feature.
    If you have any questions, just ask!
    I work with HP.

  • My wife and I own an iMac (April 2011) and just recently got iPhones.  We share one iTunes account (mainly for our uploaded music from CD).  Do we each need to have our own iTunes account?  What about iCloud?  We want to utilize the same Calendar/Contacts

    My wife and I own an iMac (April 2011) and just recently got iPhones.  We share one iTunes account (mainly for our uploaded music from CD).  Do we each need to have our own iTunes account?  What about iCloud?  We want to utilize the same Calendar/Contacts

    JoeyV325 wrote:
    Is there a way to move music/apps from one ID to a new ID?
    No.
    One of you create a new AppleID and one use the existing AppleID.
    But you can still use the items in each iTunes library.
    Create separate computer logins for each of you.
    This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

  • How many computers can you install Lion after purchasing from App store. My wife and I have our own Apple ID will it accept 2 different ID

    I have a MacBook Pro and an iMac . My wife has a MacBook and an iMac. How many computers are you allowed to install from one download. We both use Apple products and have our own Apple ID. Can I download Lion on her computers after I have both of mine installed? Or does she have to buy LION again using her Apple ID# ?

    A single purchase of Lion will allow you to download it multiple times as long as you use your Apple ID.
    If your wife wishes to install Lion, she must sign into the App Store with your Apple ID.
    Source: http://support.apple.com/kb/HT4854

  • Just got my first iPhone, an iPhone5. I added the contacts via my Mac, but the phone on its own added my 5000 Facebook friends as contacts and won't let me delete them. How can I delete them? Thanks.

    I just got my first cell phone, an iPhone5.  I added my contacts via my Mac.  But the phone on its own imported the contact info of all 5000 of my Facebook "friends."  When I go to one of them, hit edit, and try to delete them, the phone tells me that I cannot delete a Facebook friend.  This is a nightmare.  Please, I beg you, tell me how I can get these Facebook friends off of my contacts list.  Thank you!

    Settings>Facebook>Contacts>Off.

  • How can I print from ipad2 via airport extreme to hp printer on USB.

    Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

    Apple - iPad - Print right from your iPad with AirPrint.
    Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
    Check the HP site. They may have an app available you can use for your USB / Airport printer.

  • Printing on an HP LaserJet P1102w from a Samsung Note 10.1

    Hi,
    anyone who could tell if and how I can print from my Samsung Note 10.1 to my HP Laser Jet P1102w?
    I understand it must happen by connecting my printer wirelessly to my router, which I have not done yet. (I already use its USB connection to my laptop, and shall continue to do so.)
    Help is greatly appreciated!
    EinarF

    Hi,
    First connect the printer to your wireless network, it is essencial to print from a mobile device.
    First remove the existing device as following:
    On the Windows taskbar, click the Windows icon ( ), and then click Control Panel . The Windows Control Panel opens.
    In the Control Panel , click Devices and Printers .
    Find the icon for your HP product ( ), and then right-click it.
    Click Delete to remove the product.
    Disconnect the USB cable from the product and the computer.
    Once you are done launch the software installation CD again by selecting a wireless connection, it will ask you to temporarly connect the USB.
    Once the printer is connected to your network and the blue wireless light is turned On (solid), you may remove the added network device from the control panel as listed at the beginning of my post, then plug the USB and it will be added as a USB for that laptop.
    As soon as the printer was connected to your wireless router use the HP ePrint app to print from your Samsung Note:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03679829&lc=en&product=4110396&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am having issues printing from ipad via airprint compatible canon 5230- noairprint found

    I just purchased canon mg5230 AirPrint compatible printer. Attepting to print from Keynote and numbers. Message-no airprinters found. Printer does work via wireless laptop. It will print a photo only via Canon app.

    Not sure if this is a typo, but the 5230 is not on the list of airprint printers, but the 5320 is.
    Here is the list.
    http://support.apple.com/kb/ht4356
    If you have the 5320, the from the printer control panel, see if you can update the frimware on the printer.  If you have recently bought it, it was not likely shipped with the current software.

  • User Name & Password for Deskjet J4580 - to print from Ipad via AirPrint

    Was able to install the airprint driver on computer.  My Ipad sees my printer but asks me for "user name" and "password" for HP Officejet j4500 series @ zeus".  I have tried all kind of passwords and it will not accept.  Wondering how I  can either obtain user name andpassword or reset them for my printer.

    Well, this is strange because this printer does not support AirPrint.  Maybe that is the problem altogether.
    I have no idea about the user name and password, it should not have them.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printer re-starts on its own from time to time.

    My Photosmart C4680 all-in-one seems to have a connectivity problem.  Without any visible cause, it simply restarts from time to time.  Some times the PC is in use, other times it is not.  The PC generates the usual "device disconnected" and "device activated" sounds when this happens.  I have changed the cable from the printer to the pc and also re-checked the current connections to make sure they are firmly seated.  Any suggestions?

    Better news my charger I was using appears to maybe be part of the thing. I wouldn't work so I got my brothers and it charges so is it possible the old charger was shorting it thus the safety bit killed the power? Maybe the angle is just happen stance.

  • TS2235 Hi, how can I print from my IPAD to my wireless HP 6520 printer.  I have a wireless network and my IPAD and wireless printer are connected to the same network.  But when I send a job, I get the "no air printer found" message.

    My windows firewall is disabled (protected by Comcast's Norton program) so that should not be a problem.  Should I down load Bonjour?

    Hello Bleedingblue65
    Check out the section highlighted below to troubleshoot your issues printing through AirPrint.
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
    Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
    Regards,
    -Norm G.

  • Ipad 2 suddenly randomly printing gibberish all on its own

    Have tried rebooting, Hvae removed all apps from ipad and it starts shaking and then printing gibberish

    Printing or typing? A shot in the dark, is Voice Over on or off? - Settings, General, Accessibility, Voice Over

  • Need help migrating from CR9 to CR10. CR10 is now on its own server

    Post Author: ca_nimrod
    CA Forum: General
    I am not sure how to modify my VBScript code that currently uses the CreateObject command -- Session("oApp") = Server.CreateObject("CrystalRuntime.Application.9") -- to call Crystal. How do I change that code to call Crystal when it is no longer installed directly on the WebServer?
    Any help on how to get through this, no matter the solution, is most appreciated.
    -Colman

    I'm not sure how you can sync the emails you've collected via POP to the IMAP account, or whether it's possible but to setup the new IMAP account should be straightforward. Someone else on here will hopefully be able to advise on the syncing possibilities. I would take the precaution of having a backup of your current 'On My Mac' emails before doing the following.
    To create the IMAP account in Mail:
    Mail>Preferences>Accounts
    Click on the '+' to add an account
    Select 'Add other mail account'
    Enter your credentials including the word IMAP in the 'Full Name' field (to help differentiate it from your existing POP account with the same email address - you can edit the name later if nec)
    Once the detail is filled in hold down the Alt (Option) key before you click on Create and it should change to Continue
    The next screen then allows you to specify that the account is IMAP. Input the server addresses and it should be clear from there.

  • G4-450 dual back from repair shop: new power suply shuts down on its own!

    Hi
    My G4 450 Dual died on me a few months ago, i went to a Apple authorized repair place and was charged over 200 euros+ for a new Power Supply, Obviously they never tested the computer at all before installing it, i know this because when i took it home it started shutting down by itself.
    When i took it back to the guys at the shop i was told that it was on all night and it does not shut down, but yet the firewire bus was dead and its due possibly to the logic board and would need to be replaced!
    They tell me this after they installed a power suply and charged me money when i asked them to give me a estimate first, now i dont want the pwoersupply all together, do i have the right for my money back for the power supply, i agreed to pay them to test it for the charges of a hour.
    please advise anyone..

    You are definitly entitled to your money back, they sound like cowboys...

Maybe you are looking for

  • Samsung Galaxy S4 stuck on Verizon boot screen after installing update

    A few days ago my phone prompted me to install a software update, which I did. Since then, the phone (which was functioning perfectly fine before I installed the update) started acting up. I kept getting messages about apps that stopped working, then

  • WRT54GS v2.1 Firmware upgraded and wireless will not work

    Hi Everyone, I have a WRT54GS v2.1 wireless g broadband router. I updated the firmware WRT54GSv3_4.71.4.001_fw.bin since that was what the linksys website said i needed. After updating the firmware on the router, my two laptops can see the router but

  • Ipod disconnects immediately after being connected to computer

    Every time I plug my iPod into my computer it says "Connecting" then it says "Ejecting" and then "OK to disconnect"! WHY????? It does not show up in the sidebar in iTunes, and it does not show up in My Computer. I have plugged it into every USB port

  • Steps to migrate SQL Database to Windows/Oracle

    hi We have an SQL database in our client network and client wants to migrate it to Windows/Oracle. Currently they have multiple databases on the same SQL server. So I am curious to know if oracle also allows the same in Windows. I read that we can in

  • Blue Screen of Death before it even let's me install... Please Help!!!!

    I have never attempted to use Boot Camp before and have always been a Mac OS X purist but I finally broke down today and bought XP professional to run a few select programs. I printed out the instructions, partitioned my disk, inserted the XP Profess