Printing on one printer and other printer recieve the print command why..

Dear All
I have two printers on network one is HP LJ 5200n and other is HP LJ 5550n..when i give the print command and select HP LJ 5550n printer but always print goes to HP LJ 5200n printer..but when i unplug the network cable from HP LJ 5200n then print goes to HP LJ 5550n ...why this happen plz help me.
Best regards
Ashique Ali

What operating system? What brand/model of router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Office jet L7580 colour printing has horizontal hit and miss line throughout the print

I have changed all my cartridges with proper HP replacement parts and the lines keep happening. I have tried the head cleaning process untill I depleted cartridges and replaced again still the same problem. Any ideas before I buy a new printer from a competitor.

Hello tlc4dna,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are getting garbled text when you are printing. I would like to offer my assistance with getting this resolved. I am providing you with an HP Support document : Continuous Pages of Strange or Garbled Characters Print in Windows. Now this document was designed to address the exact issue you are talking about. I would suggest you review the document and follow the troubleshooting steps included to resolve your garbled text issue.
I hope this is the answer you were looking for. Thank you for bringing this issue to the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

Printing graph and other text in the same page

Hi,
I am aware that for providing graphs in ABAP report we have a FM which is called via a pushbutton in the output screen generally.
Is there any way I can do away with the pushbutton and print the graph and other text in the same page at one go ? I think Smartforms will not allow graph printing.......any other method to achive this ?
The user wants to print the graph and other text in the same page.
Regards,
Sandip.

Hi ! no it is not related to smartforms
search for custom container on google you idea about custom container.
following code is for displaying alv on selection screen which is created using custom container
and docking container.
I hope you will get some idea about how to use custom container for your problem
DATA DECLARATIONS
DATA: CONT_DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
GRID TYPE REF TO CL_GUI_ALV_GRID,
CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
IT_FIELDCAT TYPE LVC_T_FCAT,
GS_LAYOUT TYPE LVC_S_LAYO.
*ITAB TYPE TABLE OF SBOOK.
*& SELECTION SCREEN PARAMETERS
*PARAMETERS:P_TEST TYPE I .
*& AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
IF EBELN[] IS NOT INITIAL.
CREATE OBJECT CONT_DOCKING
EXPORTING
REPID = SY-REPID
DYNNR = SY-DYNNR
SIDE = CONT_DOCKING->DOCK_AT_BOTTOM
EXTENSION = 100.
IF CUST_CONTAINER IS INITIAL.
*----Create the alv with docking container
PERFORM CREATE_AND_INIT_ALV .
ENDIF.
ENDIF.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
DATA WA_FIELDCAT TYPE LVC_S_FCAT.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-REPTEXT = 'Airline Code'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-REPTEXT = 'Flight Connection Number'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
*WA_FIELDCAT-FIELDNAME = 'WUNIT'.
*WA_FIELDCAT-REPTEXT = 'Weight Unit'.
*APPEND WA_FIELDCAT TO IT_FIELDCAT.
*LOOP AT IT_FIELDCAT INTO WA_FIELDCAT.
*IF WA_FIELDCAT-FIELDNAME EQ 'WUNIT'.
*WA_FIELDCAT-EDIT = 'X'.
*WA_FIELDCAT-DRDN_HNDL = '1'.
*WA_FIELDCAT-CHECKTABLE = '!'.
*MODIFY IT_FIELDCAT FROM WA_FIELDCAT.
*ENDIF.
*ENDLOOP.
ENDFORM. "build_fieldcat
*& Form CREATE_AND_INIT_ALV
FORM CREATE_AND_INIT_ALV .
CREATE OBJECT GRID
EXPORTING I_PARENT = CONT_DOCKING.
*--perform build field catalog for alv display
PERFORM BUILD_FIELDCAT .
*--fill the drop down list values
PERFORM fill_dropdown_table .
*----fill final output table
SELECT * FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE EBELN IN EBELN.
*UP TO 10 ROWS.
*---display alv
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = ITAB[].
*---Set editable cells to ready for input initially
CALL METHOD GRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ENDFORM. "create_and_init_alv
*& Form set_drdn_table
FORM fill_dropdown_table.
DATA: LT_DROPDOWN TYPE LVC_T_DROP,
LS_DROPDOWN TYPE LVC_S_DROP.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'KG'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'G'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'B'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'T'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
CALL METHOD GRID->SET_DROP_DOWN_TABLE
EXPORTING
IT_DROP_DOWN = LT_DROPDOWN.
ENDFORM. "set_drdn_table

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

Print Record One next to other

Hi,
I am using oracle apex 4.1 and database 10g. My Requirement is to print the records one next to other, Below is the code which i am using to print the records but its getting printed one below other, Please suggest me how to print the records one next to other.
/* Employee Name and Manager Name */
for c1 in (
SELECT
FIRST_NAME || '' || LAST_NAME EMPLOYEE_NAME,
MANAGER_NAME(MANAGER_ID) MANAGER_NAME
FROM HR_EMPLOYEES WHERE ID = :P3_ID
) loop
sys.htp.p('
<div style="text-align:center;background-color:white;width:180px;height:30px;border:1px solid #000">' || c1.MANAGER_NAME || '</div>');
end loop;Thanks
Sudhir

Sudhir_Meru wrote:
I am using oracle apex 4.1 and database 10g. My Requirement is to print the records one next to other, Below is the code which i am using to print the records but its getting printed one below other, Please suggest me how to print the records one next to other.
/* Employee Name and Manager Name */
for c1 in (
SELECT
FIRST_NAME || '' || LAST_NAME EMPLOYEE_NAME,
MANAGER_NAME(MANAGER_ID) MANAGER_NAME
FROM HR_EMPLOYEES WHERE ID = :P3_ID
) loop
sys.htp.p('
<div style="text-align:center;background-color:white;width:180px;height:30px;border:1px solid #000">' || c1.MANAGER_NAME || '</div>');
end loop;
Why are you doing this in PL/SQL instead of a report?
Why is it required "to print the records one next to other"?
(You've been repeatedly asked to post code using <tt>\...\</tt> tags. Note how not doing so results in incomplete presentation of information. Why are you unable to provide this basic courtesy to other forum users?)

HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer avail

I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer available. My MacBook continues to print ok. Any ideas?

Reboot everything. Router, printer and pad. If it used to work, it will again. It just lost itself somewhere.

HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro 8600 Wireless Setup -Printing shows in Queue and then disappears. Not Printing

I just received the Officejet Pro 8600 as a gift and loaded the set up software and it on my wireless network. When I try to print an email or a coupon, the command goes to the printer and shows in the queue. Then after several seconds, the printing queue (job) disappears without printing the document. Does this command go through the HP ePrint function or the Network Officejet Pro 8600? It shows the HP ePrint as being on USB.
I've run all of the diagnostics, downloaded all of the new software, firmware and updates. I've spend many hours trying to get the printer to print.
Thank you for any help you can provide.
This question was solved.
View Solution.

Hi @bksechols
Welcome to the HP Support Forums. I understand that when you send a print job to your Officejet 8600 printer that it goes to the print queue and then disappears without the print job printing.
To better assist you, would you please provide some additional information?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using?
Are all print jobs failing? If yes and you are using a Windows operating system, please Try the HP Print and Scan Doctor for Windows. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues.
When you send a print job are emailing the printer’s ePrint email address? If so please review The HP ePrint Print Job Did Not Print If you are sending the print job by using the print command, please review the Print Jobs from Your HP Printer are Stuck in the Print Queue document.
I look forward to hearing from you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

New pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan.

Have new pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan. It will print via usb and I've downloaded the full drivers Full_win_WW_140_408 but won't install. I've also tried to install the original drivers but they were for windows XP. The printer is approx 7 years old but still works (or did!)

Hello RevPhil,
Welcome to the forums!
I noticed your post about your printer not installing properly for you on your Windows 8.1.
I would suggest trying to use the HP Print and Scan Doctor to install the printer.
If that doesn't work, please let me know what exactly happens when you try to install, for example, do you see an error message or code? Does the installation stop?
Have you tried installing both USB and wireless methods?
Hope to hear back from you shorly!
Enjoy your weekend,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to make blank copies of a PDF file and put it into the printer tray.

Dear experts,
Before you try printing the data from the FM, How tomake several blank copies of the PDF file and put it in the printer tray so that you can print just the data from the function module on it??????
Please reply.

Hi drredwood,
When you open your PDF file a yellow bar will appear on the top of the screen.
Click on 'Enable All Features'.
Then you will be able to copy the content from your pdf and to paste in any of the file.
Regards,
Florence

How do I print just one page of a .pdf using the android e-Print app?

How do I print just one page of a .pdf using the android e-Print app?

Hello,
I see that you're having an issue with printing just one page from the E-print app.
Unfortunately, on an android device, you do not have the feature to select how many pages you want to print
Thanks!

Why can't I enlarge safari bar and bookmarks bar so the print is larger. I can only do this if I change resolution on display. I do not want to make my 27" smaller. Any comments?

After just installing Mountain Lion on mid 2011 iMac 27" I find it does not allow increasing size of font for Safari bar and Bookmarks bar. The print is so small it is difficult to see. I can change resolution of screen but the the size of the screen becomes smaller. Not what I had in mind when I bought this iMac. Is there any fix out there and is Apple working on this problem? Any comments would be appreciated. Thanks.

Safari – Enlarge browsers toolbar text
Firefox

Printing on one printer and other printer recieve the print command why..

Similar Messages

Maybe you are looking for