Printing on the bottom of the page...

Hi,
I'm working on a Dunning letter report that has a remit slip. The remit slip needs to always print on the bottom of the page. Is there a way to force a frame to always print at the bottom of the page.
Thanks,
Tom

Hi Navneet,
Thanks for the suggestion, but it worked the same way as when I anchored the objects from the top of frame B to the bottom of frame A.
There are two problems that make this a little harder then it looks. One of the problems is that this a modification to the Oracle Apps Dunning Letter report. We do not want to loose too much of the vanilla stuff. So the main repeating frame incloses everything. The second problem is that there is data in the bottom frame. So it has to be in the repeating frame or I can't show the data that I need.
Thanks for the try, but it seems like this is just something that Oracle can't handle. If it could I would think Oracle would have done it in the first place. Just my guess. I'm still open to try any other suggestions you have.
Thanks,
Tom

Similar Messages

  • Layout Question - How to print a frame on the bottom of the last page ?

    I have a summary frame for my report. I want to print the summary information at the bottom of the last page of the report. Currently depending on the data, the summary frame prints anywhere on the last page. How do I make sure it prints exactly at the bottom of the last page (just the last page).
    Thanks in advance.

    You might like to take a look at the following threads:
    Last frame with last record of proceding repeating frame
    Re: How to capture a keystroke - including control chars?

  • Formatting - How to print a frame on the bottom of  the last page ?

    I have a summary frame for my report. I want to print the summary information at the bottom of the last page of the report. Currently depending on the data, the summary frame prints anywhere on the last page. How do I make sure it prints exactly at the bottom of the last page.
    Thanks in advance.

    Hello,
    I know this is an old post, but I have the same problem. I am unable to access the examples for Note.252881.1 (corrupted file). May I impose on you to send me examples via e-mail? If this is not possible can you point me in a direction where there is "good" documentation on frame manipulations? What I've found on metalink, otn, internet, etc. haven't been too forthcoming.
    Thank you.

  • Can't reach the print button on the bottom of the page

    When the page preview page appears, I can't reach the print button at the bottom of the page.

    To use AirPlay, you will need the following:
    iPhone  4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    Apple TV (2nd or 3rd generation)
    AirPort Express
    Wi-Fi (802.11a/g/n) network

  • HT1338 I'm trying to print a document fro safari and the print command is at the bottom of the page and not visible.  I can't move it up and the print command shortcut doesn't work.  How do I print this document.

    I'm trying to print a document from safari and the print command is at the bottom of the page and I can't move it up.  The print command shortcut doesn't work and I would like to know how I can print this document.

    Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

  • When printing to PDF from webpage, the pdf is compressed on the bottom of each page and markedly smaller print. How do I correct this?

    When printing to PDF from webpage, the pdf is compressed on the bottom of each page and with markedly smaller print, the top of the page is fine. How do I correct this?

    Open Contacts and click Preferences on the menu named Contacts. On the General tab of the Preferences window, select Show First Name: Before Last Name and then print. You can change that Preference back to the other way after printing if desired.

  • Why doesn't my HP deskjet x64 printer print to the bottom of the page

    When I print a document it only prints upto about 3cm above the bottom of the page. I have tried changing margins on the documents abd the prints. i have tried selecting different options (eg legal document size which is bigger than A4)
    I have tried a PDF and word document and nothing works.
    Nothing on the HP help pages or printer settings shows anything that might be changed either.

    Hi again st12,
    The Doctor should have gave you a button to click on to take you to the fix that the software needed.  Seeing that you are having issues, I suggest contacting HP Total Care directly.  An HP rep has the resources and the ability to assist with this issue and they can give you step by step instructions on how to troubleshoot more effectively.
    If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you once again for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Printing the username at the bottom of the page?

    At our high school we are using an Xserve G5 (10.4.8 server) using Workgroup Manager with labs of eMacs (10.4.8 client) for our students. Is there anyway to have the students papers print out with their usernames on the bottom of the page so we know who is printing inappropriate materials?? We have HP LaserJet 4200's if it makes any difference.
    Thanks,
    Josh

    We were looking for this too, but I don't think it exists. However, you can run your print jobs through your Mac Server and turn on print services. Then select the print queue to print a standard cover page. This will print out the username that they are logged in under before each print along with the name of the file/document they are printing.

  • How do you stop the printer cropping off the bottom of a page when duplex printing?

    I've set my printer to borderless printing, and all other edges are ok, but the printer is not printing to the bottom edge. Is there anyway I can print duplex and right to the edge? I have a new HP officejet pro 8600
    Thanks

    Unfortunately this didn't help. The printer has been set up correctly for wireless printing (also I have a PC, not a Mac). I have all of the page settings set correctly. The problem is that I am trying to print documents (concert programs) that have a black border that goes right to the edge of the page. So when I set the printer to borderless printing, three of the borders print correctly (right to the egde), but the bottom of the page stops about 1 cm from the edge.
    Will it only be possible for me to print right to the bottom edge of a page if I remove the duplex attachment and only print single sided? If so that will be a big problem.

  • How can I turn off the url that continues to print at the bottom of the page?

    Anytime I print, a URL appears at the bottom of the page. How do I turn this off?

    It's not something that you turn off, there isn't a setting for it, you will just have to try to avoid touching the top part of the screen. Apart from that you can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • Will the web address show up on the bottom of the page when I print my forms?

    I am still in preview mode, and am not ready to go live yet with my forms, but will be soon.  But when I am testing the forms and I print them, the web address prints on the bottom of the page.  Will this continue to happen when my forms are live and found on my website, or will a web address always show up on the bottom of the form when it is being printed?  We keep a lot of our forms in paper copy for records and it looks sloppy with that on the printed version.

    The browser puts that there, not us. Check your print setup options.
    You can also save out the form as PDF and print that.
    Randy

  • I upgraded to OS X Yosemite, and now every time I print, it cuts off the bottom of the page, and is missing content.

    Ever since I updated to OS X Yosemite, I have had trouble printing. I don't just use one program. I use many. Printing from the internet, Word, Preview, everything. It just won't print correctly. It has no margin at the bottom of the page, and continues as though theres more paper, and is therefore missing content. It's so annoying. I'm going out of my mind. what do I do?

    Printers not behaving? Reset them and start from scratch | MacIssues
    OS X- Printer and scanner software available for download

  • I need a section to display at the bottom of the first page of my report

    My report displays a number of records, but at the bottom of the first page of the report, I need a section (a remittance slip) that would only appear at the bottom of the first page.
    I've tried using a page footer with conditional suppression.  This is fine for the first page, but in subsequent pages, the footer space is reserved, so the records in my details section only go 2/3's of the page.  "Reserve minimum page footer" seems pretty useless.
    I've looked into using a details section that uses "Print at bottom of page".  But since my report contains groupings, this messes up my report structure and leaves a lot of extra space as well.
    I can't guarantee that a group footer section will always be on the first page, since it is found at the end of each group.
    Any suggestions?  Anything I'm missing?
    Thank you.

    hello plynch,
    i would use the method that Abhilash suggested.
    " I guess if we have a section (other than the Page Footer, perhaps another Details section) that is always suppressed except when the record count reaches x numbers and have it printed at the bottom, this could be achieved"
    if you
    1) create a new formula for every section that counts the height of the section...
    whileprintingrecords;
    numbervar lines:= lines + .2 
    //use the above for a details section that is .2 inches in height
    whileprintingrecords;
    numbervar lines:= lines + 2.2
    //use the above for a group header section that is 2.2 inches in height
    2) do the above for every section (yes it's painful but it works) and you'll see how the sections add to the running total
    3) create a new details section that is conditionally suppressed if the page is not equal to 1 and if the running total count is not within a certain height range
    4) make this new details section the height that you want the remittance slip and also have a New Page After forced for the section conditional on it being page 1
    the above takes a bit of finicky work but if it's worth getting rid of the blank space...
    cheers,
    jamie

  • How do I remove a small line at the bottom of the page?

    Hello!
    I'm formatting some work for a client and I can't seem to find out how to remove this line at the bottom of the screen. It's on every page. It's not a line that was drawn in because I can't click to remove it. Has anyone seen this before?
    Thanks,
    KHILL

    Post a screen shot so we know what you are talking about.
    Does it print, or is it just on the screen?
    Jerry

  • Footer at the bottom of the page in Smartforms

    Hi All,
    I need to print some Sales data and then a hard coded paragraph at the end of last page of the print out n Smartform.
    Now the problem is:
    1. If I put that paragraph in the footer then it prints as soon as the data ends in main window and not at the bottom of the page. Eg : If the data ends at the 5 line of the second page then the paragraph is printed immediately after that and not at the bottom.
    2. If I put it in another window and give the option only after end of main window then except the last page that space for that window is empty and if I try to overlap main window then even on the last page if the data is till end of that page main window data gets overlapped on the hardcoded paragraph.
    Please help me on the issue.
    Thanks,
    Sameer
    Edited by: sameer_rk022 on Mar 31, 2011 10:04 AM

    Hi,
    Solution: The issue faced after overlapping the main window with footer window can be achieved by creating a folder within the main window and using the events to check whether there is enough space to print the footer.
    Following are the steps.
    Step 1:  Create a Secondary window say “Footer” which would be the footer window. Overlap the main window on the footer window as shown below.   
    The footer window will be behind the main window
    Step 2:  Create a folder within the main window say “Check_Footer”.
    Go to Tab “Events”, select the checkbox “Footer with Height” and give the required height of the footer. Select the checkbox “at End of Table”. Specify the “Minimum height” as required.
    Now, go to “Conditions” tab and select the checkbox “Only before end of main window”.   
    This is basically done to check whether there is enough space to print the footer on that page. The Footer window would then print the output.
    Step 3: Go to the created “Footer” window .Under the Conditions tab, select the checkbox “Only after end of main window”. Create a  text/tamplate/window whatever you want to display at bottom or footer data.
    Step 4: Save & Activate the Smartform and check the output.
    regards
    Rohit

Maybe you are looking for