Printing One Address Multiple Times

Hi All,
I am using the label format portion of Oracle Reports and I am trying to display/print one address multiple times based on the user's input. Is this possible? Any coding example would be greatly appreciated. Thank you for your help in advance.
Michael James

You could pass this value as a parameter to the report and add a where clause to the report that limited the numbers returned based on this parameter. This is essentially what Kevin's doing in his example (the reference to :copies_required).
Incidentally, there's another way to do this without creating a new table of integers. You can get the same result by using the rownum pseudo column (as long as you have a table with at least as many rows as the number of times you want the address to repeat). You can then create one driving query:
select rownum from table
where rownum <= :number_of_copies
and a detail query:
select address from address_table
Link these queries with a group link and generate a default layout. Delete any columns in the 'rownum' repeating frame and run - you should get the address repeated the number of times specified in :number_of_copies.
Hope this helps,
Danny

Similar Messages

Printing one address multiple times on the same label sheet

Does anyone know how to print the same address on all 20 labels of a label sheet. So far I can only figure out how to print 20 different addresses. Any help would be appreciated. Thx.

Greetings,
That's not a feature of Address Book. You can do that with a program called pearLabelizer, which is free. If you want to print groups from Address Book, it pulls the information for you and prints the labels; if you just want to print one address onto multiple labels, you can type it in or paste it in from somewhere, select all the labels and then Print and it will be done for you.

To print one photo multiple times on a single page

The title of my question is the title of the page in iPhoto 8 help.
"To print one photo multiple times on a single page"
It says (a bit shortened) 1. Select photo 2. Click print button 3. Select paper size 4. Select print size 5 Click Customize button 6 Click Settings button 7. Select "Multiple of same photo per page from the Photos Per Page pop-up menu. 8 Click OK 9 Click Print.
I can not find the pop-up menu referred to in Step 7. There are two "settings" buttons - neither produce a Photos Per Page pop-up menu. Settings appears if you click a double arrow to the right in the lower margin but only deals with font issues and "Print Settings" does not offer such a pop-up.
I am using Leopard on a PowerBook G4 and just bought and installed the newest iLife 8.
Grateful for help.

Arthur:
When you click on the Customize button there will be a Setting button in the next window. Click on it and in the drop down window that comes up will be the option to print multiple photos of the same photo per page.
Select that option and click OK. You'll get the spinning cursor for a few seconds as iPhoto creates the multiple copies on the page you selected. Be sure that the print size is small enough so that you can have multiple copies of it on the paper size you selected.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problems printing one photo multiple times on a single page

Im trying to print multiple photos on a page so as to not waste paper. I have a 4 X 6 photo and want to print 2, 3X3 photos on the page. If you follow the HELP directions which are
Choose FILE > Print, Select paper Size, in my case 4X6. click on customize, Click Settings button then choose "Multiple of the same photo per page"
The "Multiple photo per page" option is grayed out. After troubleshooting it appears the software is telling me that two 3X3 photos cant fit in a 4X6 inch wide space and wont let me try. I was able to get around the problem by printing two 2.9 inch photos.
The software should be friendlier - Allow me to print 2 photos that are a exact fit to the paper. If the photo needs to be adjusted the software should do the adjustments in the background.
If Im having a problem here Im sure others are too.

Eric
Welcome to the Apple user to user assistance forums
Note that this is NOT a reporting path to Apple - iPhoto menu ==> provide iPhoto feedback to do that
No one but us users here - and I do not see a question in your post - just a rant and how you found a work around
Note that in general you DO NOT want software to change your specs - if you need a 3"x3" print you do not want the software to change it to 2.9" x 2.9" in the background - if it can not do what you requested then not doing it and having you adjust the request is the most appropriate path IMHO
LN

Printing one photo multiple times on a single page

Hi I am trying to follow the instructions in iphoto HELP to let me print multiple copies of the same photo on one page. I can set it in the drop down menu but I can not see where to select the amount of photos on the page ie. 2, 4 6 of the same photo. Can anyone help ?

sorry I sorted it myself works ok now.

Can't print a photo multiple times on a single page

I just installed iLife 8 and am trying to print one 3X5 photo multiple times on a single page. When I consulted the help menu in iPhoto, I found what I thought was the answer. When I followed the instructions, I hit a snag because I don't have the Photos Per Page pop-up menu it references. Any ideas on how I can do this to save paper?
Here's what the help menu said:
Printing one photo multiple times on a single page
If you have a favorite photo you want to share with many people, you can print multiple copies of that photo on a single page.
To print one photo multiple times on a single page
Select the photo you want to print.
Click the Print button.
Select the paper size (such as letter-size or legal-size).
Select the print size (such as 2 x 3 or 4 x 6).
If you want to make the photo a custom size, select Custom.
Click the Customize button.
Click the Settings button.
Select “Multiple of the same photo per page” from the Photos Per Page pop-up menu.
iPhoto will zoom and crop the photo to fit the space available. To make a photo appear full-frame, Control-click the photo and choose “Fit Photo to Frame Size” from the menu that appears.
Click OK.
Click Print.

Well don't I feel stupid! I just installed iLife '08 and assumed that it would tell me right away if I needed any updates. I found and installed the needed updates (7.1.1), I got the right settings drop down menu to print multiples on one page. Thanks for your help

Why does my iphone only send one picture multiple times when i select multiple photos to send?

why does my iphone send one picture multiple times when i select multiple photos to send (via message or email)?

Are you sending via Camera itself?
That is, selecting a picture, then select forward link symbol from bottom left
then select another picture,
Each time make sure you see the blue check mark at bottom right of each selected picture.
The number of " # Photos Selected" should be displayed at the top.
Then select Mail or Message and transmit.

Reply to "print one image 4 times/page"

The original question was posted by pap0007, and then followed up on by "PRL Sean" who made very a very apt point. I wanted to echo it in that thread, but there are no "Reply" links or buttons, so I'm posting it here and referencing the original (http://forums.adobe.com/message/3271201#3271201).
I'm just really curious why this isn't a feature in the print options yet. I've used the workaround for years, but I agree with PRL Sean when he says that clearly this functionality is in high demand.
Print shops must be doing this all the time (heck, even photocopiers do this), and I find it hard to believe that they're taking the file and making three copies of same that they can then insert to the original and do "4 pages per sheet." I really wish Adobe would make this easier. No doubt there are tens, if not hundreds, of thousands of cases where somebody has a one-page doc (a flyer, for example) that they want to print multiple times on one sheet.
I hope for all of our sakes, this happens soon.

Requests for new features post here:
http://forums.adobe.com/community/acrobat/acrobat_feature_request

Printer shows up multiple times in my device list

I have an EA4500 router running firmware version 2.1.39.145204. A device, which I assume is my HP printer, shows up on my device list multiple times (11). This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface. The device listed as "Photosmart Premium C309g-m" is indeed my printer. The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi. There is no hard wire connection from the printer to the network.. As you can see, there is a bunch of other devices listed all with the same name. These devices have the same IP address as my printer but different MAC addresses. My questions are:
1. What causes this situation?
2. How do I fix it? By this I mean, how do I remove the multiple listings?
Thank you in advance for your help.
Name MAC address IPv4 address Connection
PKs-iPad
FC:25:3F:9B:5B:66
192.168.1.118
Wireless
HP0026550FA2B0
DC:E0:00:00:B8:C5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:20
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:10:9F
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:109
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:38:A5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:20:74
192.168.1.128
LAN
Owner-PC
00:23:08:CC:F6:00
192.168.1.130
LAN
PETER-LAPTOP-WiFi
00:1D9:68:F2:E0
192.168.1.122
Wireless
David Cohen’s MacBook Pro
00:23:6C:92:CE:22
192.168.1.104
Wireless
Photosmart Premium C309g-m
00:26:55:0F:A2:B0
192.168.1.128
Wireless
HP0026550FA2B0
DC:E0:00:00:20:AA
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:B4
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:98:81
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:18:A9
192.168.1.128
LAN
Name MAC address IPv6 address Connection

Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

Reg: To get One employee multiple times based on condition

Dear Friends,
I need your help regarding this Requirement.
Need to display the contractual years for every employee in the valueset.
If the emp is hired on 29-Feb-2004, then his contractual years should be as follows:
1) 29-feb-2004 to 28-feb-2005
2) 1-mar-2005 to 28-feb-2006
3) 1-mar-2006 to 28-feb-2007
4) 1-mar-2007 to 29-feb-2008
5) 29-feb-2008 to 28-feb-2009....... and so on up to current year ( *9* times)
If hired on 1-Jan-1997, then *16* times
I have developed the above logic in CASE <logic> END statement. The logic is depends on row number partitioned by Employee number. So now i need to incorporate it in SELECT statement since it will be used in Valueset. For this i need multiple rows for each employee as above number of times. So that i can create view accordingly.
Please do needful...
Thanks in advance..

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

Balky printer keeps jobs until que and prints one at a time when computer is turned off

6300 printer is holding jobs in a que (sometimes saying it is on "pause") but refusing to print after it is changed to "print". Then suddenly prints one job after computer is put to sleep, sometimes as much as an hour later! HELP!!!

Hi catawba ,
Welcome to the HP Forums.
I see that you are having some communication issues between the printer and the computer.
Seeing that HP has many models of printers with 6300 in the title, please respond with your printers Model Number:
How Do I Find My Model Number?
Once I get the printer information, I can then do that appropriate research.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Printing 1 item multiple times

I have tried to print 1 item (1 page in length) from Photoshop, InDesign, Illustrator and Acrobat (All CS3) in large quantities - 100+. The problem is, I send the same sheet 100 times, so it overloads the network & printer, and nothing ever prints. Never had an issue doing this before, but now I can't figure out how to tell the printer to print 1 thing 100 times, and not 100 things 100 times.
Mac Pro - 10.5.latest updates installed - OCE Color Copier with the Fiery driver hard drive thing attached to it.

The printer was named incorrectly.

When we send a job to the printer (C7280) it will print that one job multiple times even though we

When we print a job to the C7280 All in one it prints multiple copies when sent from our Mac Book Pro.

You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
Just change the AppleID used for iMessage in Settings > Messages > Receive At

Printing same photo multiple times on one contact sheet

I am trying to figure out how to make multiple copies of one photograph when I select it for printing on my personal computer. What can I do instead of making multiple copies of the photo in order to make it print more than once on the page? Let me know if you need further information to help me!

To add a little more info to Androcles post, check out the page from iPhoto support
Printing your own photos and greeting cards.
Lori

Printing One Address Multiple Times

Similar Messages

Maybe you are looking for