Printing out of Photoshop with new Epson interface

Does anyone have the proper workflow for printing out of Photoshop CS4 to an Epson 3800 with the new Epson printer preferences interface? I just upgraded to a new computer that is running Vista 64 and downloaded the Epson driver for that OS and now the print preferences window is totally changed. Most importantly I do not see any option for turning off printer color management so that Photoshop can manage color.

This post by Miguel may or may not be helpful:
http://forums.adobe.com/message/2096662#2096662
It is my understanding that when printing out of Photoshop, with "Proof" selected under Color Management, and "Photoshop Manages Colors" under Color Handling, Photoshop is performing 2 color conversions on output.
The first is to the "Proof" profile (which for commercial print purposes describes the press condition), based on Color Settings. Then this in turn is converted to the RGB ink jet printer profile.
With this final conversion, it changes depending on the Proof Setup options (paper color, black ink) in the Photoshop print dialog. If neither is checked, it is Relative Colorimetric, BPC enabled. If black ink is checked, Relative Colorimetric, BPC disabled. If paper color is checked, Absolute Colorimetric.
Maybe these correlations are common knowledge but they were certainly news to me. What it means is, if you are having a lot of trouble with a print interface, you could do the necessary conversions manually and send uncalibrated RGB to the printer. Not an efficient workflow but will work if you're in bind.

Similar Messages

Print out of RFQ with One Time Vendor

My customer wants print out of RFQs with one time vendor.
As per my understandings as like other vendors this one time vendor data is not stored in any table.This data is in table ADRC. And for one time vendor no master data is there.I can see this one time address in particular RFQ.
Now, my customer wants this one time vendor address to be printed in all RFQs.
Is any body come across this scenario ever ?Please guide my it is urgent.
With Best Regards,
Rajesh

Hi,
The vedor(OTV or Regular vendor) will be decided after the price comparision only.
Once the OTV (account group:CPD/CPDL) is finalised as the final vendor for procurement create a new vendor master record (With A/c group:0001) and maintain Inforecord and source list and create PO.
Maintain all the conditions in the Inforecord from the quotations (you have the update info option from price comparision itself)
regards,
Kannaiah Naidu

I can't print from iPhoto on my new Epson XP820 printer. Any suggestions?

I can't print from iPhoto on my new Epson XP820 printer. I can print from other applications, like Word or Mail. Any suggestions?

Did you check software update or App Store to see if the printer is among
those Epson models who may have an update download available now?
Of course, some of these printers, even though wi-fi, may require the wire
to set them up for first-use, to be identified. Both my Epsons appear twice,
for wi-fi and again with USB. So I named each appearance, different. So it
is possible to tell in more than one way, which setup that was selected. A few
features do not correctly work in instances where drivers differ.
The latest Epson update helped my newer computer connect to oldest Epson.
Even though a 1.3GB huge Epson drivers file did not help, & OS X didn't see it.
Hopefully the they included an adequate quick-setup guide, though that may
have been for Mavericks, etc. Yet your iPhoto issue may be something else.
Good luck & happy computing!

How to print out a JPanel with its components

Hello,
I want to print out a JPanel where several components are placed in. The problem is just that neither the printAll() method nor the print() method works to do so. There's always just a print of the empty JPanel. Is there in general a possibility to print out a JPanel with its components or are I'm on the wrong way ?
Thanx,
Findus

I just posted this link and it works here:
http://forum.java.sun.com/thread.jsp?forum=31&thread=361445&tstart=0&trange=15

Recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remeber that password to log out and login with new credentials

I recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remember that password to log out and login with new credentials.

I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!

CS2 printing broken with new Epson driver and/or 10.5.5?

I've been using InDesign CS2 for fine art printing for the last year (CS3 printing was totally broken) to and Epson R2400. Originally, I had been using Photoshop, but I found printing from CS2 gave the same results and I had better control over crops, etc. within a specific framed size. InDesign CS2 and Photoshop gave the same great color results. Then, this last week, I updated both my OS (from 10.5.4 to 10.5.5) and my Epson driver (as 10.5.5 wouldn't see my R2400 via FireWire). Now, when I print from CS2, I get crappy prints. Not as crap as CS3, but WAY crappier than Photoshop.
Has anyone else experienced this? Such a bummer!!!!
I wonder if InDesign CS4 is broken too? Anyone know if they've fixed the printing issues in CS4 (not holding my breathe as I'm sure they were rushing to get CS4 out the door just as much as they were CS3).
Thanks,
Kristin.

Got it working again. All I did to fix it (and match the same output from Photoshop) was, in the driver, under Color Matching, I selected "Epson Color Controls" (and then turned off color management in Printer Color Management).
Not sure what has changed, but this worked for me. Haven't tested in InDesign CS3 or CS4 yet.
k.

Printing problems from Photoshop Elements to Epson XP-800

I cannot print photogrpaic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Any suggestions for solving this rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
Grateful for any help.
Stuart

Please use the Elements Forum http://forums.adobe.com/community/photoshop_elements

Cannot print out of Photoshop CS5.1?

I have Photoshop CS5.1 & it will not recognize my printer. Now the print option is totally grayed out & I have to print out of Elements. I have tried reinstalling the printer software. Suggestions? I am on an iMac with os10.9.5?

Awesome, glad it's working now! You're welcome!
Benjamin

Printing out of Acrobat with Yosemite

I just got a new mac with Yosemite. When I print out of Acrobat XI sometimes it prints the job bigger than it is or it shrinks it. I have it set at Actual size, and have also told it Custom Scale 100%. Printing to a Xerox 700. Any ideas?

Lana_Prolific,
Perhaps you can provide us with some more information. What is the defined page size of the pages you are trying to print? Also, what is the page size you have selected on the Xerox 700 printer? Does the same problem occur when you attempt to print the same pages to other printer models? You also might want to consider checking whether Xerox offers an updated driver for this printer for MacOS 10.10.
More info and we might be able to assist you further. FWIW, this is not an issue that we have previously heard about either through these forums of the Technical Support organization. At this point I would not make any assumptions as to whether MacOS 10.10 or Acrobat 11.0.10 is the culprit.
- Dov

Printing blank pages - even with new genuine HP cartridges

All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
Help!!

arcalgud wrote:
All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
Help!!
The document here may help resolve the issue of blank printing on the Officejet 6700.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print out a page with a all controls

Hello
Is it possible to print out all the controls on a page.
I meam all together with one function?
Thanks
Phil1

I assume you're asking how do you print an MFC dialog with all of its controls. Is that correct? If so, try adding a method to your dialog class with this code:
CPrintDialog printDlg(FALSE);
if (printDlg.DoModal() != IDOK)
return;
DOCINFO documentInfo;
::ZeroMemory(&documentInfo, sizeof(documentInfo));
documentInfo.cbSize = sizeof(documentInfo);
documentInfo.lpszDocName = _T("Dialog Document");
HDC hdcPrinter = printDlg.GetPrinterDC();
CDC printerDC;
printerDC.Attach(hdcPrinter);
printerDC.StartDoc(&documentInfo);
printerDC.StartPage();
HDC hdcScreen = ::GetDC(NULL);
CDC screenDC;
screenDC.Attach(hdcScreen);
long screenPpiX = ::GetDeviceCaps(hdcScreen, LOGPIXELSX)
long screenPpiY = ::GetDeviceCaps(hdcScreen, LOGPIXELSY);
long printerPpiX = ::GetDeviceCaps(hdcPrinter, LOGPIXELSX);
long printerPpiY = ::GetDeviceCaps(hdcPrinter, LOGPIXELSY);
long xRatio = printerPpiX / screenPpiX;
long yRatio = printerPpiY / screenPpiY;
CRect windowRect;
GetWindowRect(&windowRect);
CRect targetRect = windowRect;
targetRect.right = targetRect.left + (targetRect.Width() * xRatio);
targetRect.bottom = targetRect.top + (targetRect.Height() * yRatio);
targetRect.OffsetRect(
-targetRect.left + (targetRect.left * xRatio),
-targetRect.top + (targetRect.top * yRatio)
CDC* dialogDC = GetDC();
printerDC.StretchBlt(
0,
0,
targetRect.Width(),
targetRect.Height(),
dialogDC,
0,
0,
windowRect.Width(),
windowRect.Height(),
SRCCOPY
ReleaseDC(dialogDC);
screenDC.Detach();
p
rinterDC.EndPage();
printerDC.EndDoc();
printerDC.Detach();
This isn't perfect, but hopefully it can get you started.
- Elton

Can't print more than once with my epson epl-5800L and airport express

I recently bought an airport express (b/g) in order to use it with my epson usb printer epson epl-5800L. I'm running mac os X leopard 10.5.7 on my macbook pro (2.4 ghz). The printer is plugged into the airport express (firmware 6.3).
My problem is the following : i can only print one job (one document), after that if i want to print a second document, the printer don't accept the print job...and the print status windows shows the following message "Unable to open device (read failure)!". The only solution to get it printing again is to reset the Airport.
I downloaded and reinstalled the last 10.5 driver from epson site, this didn't result in any success, the problem remain, it's even worse now the application office word quit unexpectedly if i try to print through airport express. The error message say "The application escpageASTool quit unexpectedly".
The problem seems only related to airport express via Bonjour protocol, because if i connect the printer directly to the usb port of my macbook pro i can print without troubles. Also, as reported from many forums Tiger 10.4 seems not concerned by this problem.
Any help would be much appreciated!
Thanks,

I found this statement - +"Note: AirPort Base Station and Time Capsule printer sharing is for printing only, not for printer utilities or other special features that may require a direct proprietary connection."+ within http://support.apple.com/kb/TS1253. Not sure if it pertains exactly to your issue.

Print out all contacts with all info showing in Outlook 2013

In Outlook 2013, if you click the Contacts group you want to print, then go to File...Print, the only option is to essentially print the view you have when clicking into the People menu.
How can I print out every contact showing all the info in each contact?

Hi,
Do you want to print each contact into each printout page with all the info? If so, you can try printing using the
Memo Style. To do this, click the contact group you want to print, select one contact and then press Ctrl + A to select all contacts in the contact group. Then, click File > Print. Under
Settings in the Print tab, select Memo Style. Click
Print.
For more information about print contacts in Outlook 2013, please refer:
http://office.microsoft.com/en-us/outlook-help/print-your-contacts-HA102749446.aspx
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

AUTO PO print out creates spool with RFC user.

We have classic scenario where AUTO SRM PO print out spool is create with RFC user. While PO data is passing to R/3 is correct with correct user (created_by). Out put is created on the name with RFC user not with user who create SRM SC& PO. BADI BBP_CREATE_PO_BACK will help?

Hi Vishal,
Welcome to SDN.
Do they use custom PO SAPScript/Smartform?
If they do, you may want to check the print program (custom one) and the custom PO form. Perhaps there is some logic to set/display with the european decimal notation.
If they don't, you can also check the print program setting and do debugging (if necessary) to find out the logic to assign european decimal notation.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Problem with printing 6x4 from Photoshop CS5 to Epson 2880

Hi,
bit of an odd one. I can print A3 and A4 no problem, but when I try to print a 6 x 4 it looks like the printer is not reconising the size of the paper. It prints the image the right size, but as though it were printing it on a larger sheet of paper, in the left hand side with a a 5cm space to the right (which is actually the top of the image).
I have set the printer to 6 x 4 for both image and paper.
Any ideas?
Thanks

I have an Epson 2200, but am assuming the drivers and print dialog accesing that driver and ICC profiles are very similar to Epson's 2880, which is the same size as the 2200.
In order to print 6 x 4, whish isn't a standard page size in the print dialogs, are you setting up a custom page size? (Print > Print Settings > Page Size > Manage Custom Sizes) - This works fine here, but if the paper is the wrong size, it won't print. The print driver requires that the paper size actually be 6 x 4.
Of course, an alternative approach might be to print on a standard paper size, maybe adding trim marks, and then cutting the page down to 6 x 4 after printing.
If none of this helps, I suggest you contact Epson's tech support.

Printing out of Photoshop with new Epson interface

Similar Messages

Maybe you are looking for