Printing outlines: text all on left side of page

I'm using Keynote 3, and having problems with printing outlines. All of the text is squished onto the left side of the page as if the page were laid out with columns. What should be 4 pages of outline (as it was in Keynote 2), is now about 10 pages, but with the right side of each page blank. Has anyone seen this, and more importantly, does anyone have any ideas how to fix it?
Katrina

Well, I figured it out... I had to change the view
from "Navigator" to "Outline" and move the divider
between the outline and the slide as far to the right
as it would go. Then, when I went to print the
outline the text filled the page. This did not
happen in Keynote 2.
Katrina
Thank you, thank you, thank you, Katrina! I was completely mystified until I read your solution! It worked like a charm.
Lily

Similar Messages

Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

All web pages? Or just some? Example of a page where that happens?
Do those pages have '''Frames'''? IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
If that isn't a Frames issue, my advice is to do the '''reset''' described here. 
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer Make sure you reset all the prefs for that particular printer.

Brand new laserjet pro 400 only prints about 1" down the left side of the page

I just unboxed a brand new Laserjet Pro 400 for a teacher, and upon running a test print, the printer only prints about 1" of the text down the left side of the page. The text fades to white, and the entire remainder of the page is blank! I re-seated the toner cardtridges, ran the cleaning program, and am still getting the same results! Any suggestions? A scan of the page is attached. It came out this way after each solution that I tried!

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to fix printer settings-only prints left side of page?

how do i straighten out printer settings as printer only prints left side of page.i have a 2008 imac. thank you

Have you contacted Canon Support?

How Can I Achieve Sliding Out Social Icons on Left side of Page?

I have been trying to find free plugins, but ways to work with the various states in Muse, but am having trouble deciding which was is best. Here is an example of what I mean,,, but all are only for Wordpress.
http://smartcatdesign.net/sliding-social-icons-free-wordpress-plugin/

ok try and explain this best as I can....
ok,,, I used a set PSD document size first to make sure all Active Icons were same size....(screen shot 1)
2) Then after I had every icon I needed,, I saved each one as for instance facebook_active for site purposed,, but leave this document open to simply bring in the icon to next file
3) Next I opened a new PSD document and set size to 153px x 47px (was size I was looking for, which would be my hover state in the end)
4) If you look at my layers closely you will see kinda what I did,,, just added new layer and went little passed left edge of each icon with its own color: facebook=blue youtube=red.....
5) Then I centered text to make sure all text would be in the same spot and look good.
6) then when u have my 2nd screen shot,,, save that as facebook_hover
7) Muse time,,,,, go to muse and make rectangle of the size of your hover size (my case was 153px X 47px) and place with left edge alligned to left side of page.
go to fill,,, and image icon to upload your active icon first and make sure is original size and set to far middle left......then make sure your color fill is transparent,,, nothing.....
8) Then go to states and rollover and then go back to fill and upload the hover image and do original size,, should fill rectangle exactly

How to print the text in only last but one page in sapscripts

hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards

Why does ipad cut off left side of page?

What do you do to see left side of page which is cut off?

If you have Zoom enabled, that could cut off the left side of the screen, but everything would appear very large on the screen as well.
Settings>General>Accessibility>Zoom>On. You want to turn it off. Double tap three fingers and drag to change Zoom. You can see the instructions below.
If that's not the problem - try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When directing text or jpg to printer, it only prints 3/4 inch on left side. IE & Safari print OK

My laptop is running MS Vista home prem.
Firfox 4.0, Mozilla forefox yahoo! edition 1.8
I can highlight and print text selection, print entire text page, or just print a jpg photo from all sites while in firefox. Result is it prints only 3/4 inch wide strip from top to bottom of page and the rest of the page is blank.
If I execute the exact print functions of the exact txt or photo via IE or Safari all prints fine over entire page.
Another problem:
Also I when I would right click on a photo and perform "save an image" it firefox seems to be working fine and it saves the photo but when you attempt to display it later it is just text garbage.
thanks for your help. tom

Try the '''''reset''''' described here: 
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer 
Make sure you reset the '''margin''' prefs for that printer.

Photosmart 7150 - Prints left side of page only

I have used my Photosmart 7150 for years. All of a sudden, prior to printing I get a "PAPER SIZE MISMATCH" message telling me to pull the photo slider out. The photo slider is all the way out. I press the "RESUME" button, and only the left side of the page prints. Does anyone know how to correct this?

There may be more than one issue here. The photo tray issue may contribute to both issues. Try this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01839973&lc=en&dlc=en&cc=us&product=1153754&lan...
See if this helps one or both issues.
Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Pages arn't loading properly states to dissable page updates everything loading on left side of page or all misscombobulated

Can you please help I have some pages that load the right way and others that don't. The ones that don't all either load all on the left side of my screen and others load all miscombobulated. I get when I loge into my yahoo to Disable automatic page update, and on my e-bay and others I get nothing but a totally messed up pages. I always use firefox to go on the net. Can You Please Help???????
PS I just went to your web site and updated the free firefox but this problem has been going on for the past 4 or 5 day's now I can't take it no more!!!!!! Please Help

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Websites+look+wrong

Printed documents are missing letters on left side of page

Having problems with a printed document. The left side of the document is missing the first few letters of each line.

The option appears when you choose PRINT. You get a window with a preview of the document at the right and options on the left. Take a good look, the name might be slightly different. The options are important, get to know them.

To print a logo on the left side of header in ALV

hi,
this is murali, i got an assignment for printing the logo on left side in alv.

check the below links
ALV - logo display
Re: logo inclding in ALV
Logo Alignment in ALV
another useful link:(this has the code itself)
/message/1713313#1713313 [original link is broken]
Message was edited by: Srikanth Kidambi

Vertical black line with shade dots down left side of page - NEW Cartridge

I installed a NEW cartridge and was able to print about 30 pages before the paper began having a 1/16" black stripe with shade(?) dots down the left side. Could someone please advise.
Thank you,
Erin

Thanks.
I am very new to Pages. Yesterday I decided to go after a "Brochure" template, as it already had at least one vertical line separating text passages on the left and right. But there were too many sections, so I went about deleting all the extraneous, unwanted lines. And also the unwanted horizontal lines. To do this, you have to click the line itself to discover where the "nodes" are. But the nodes are locked, so you have to go to the top control bar of the desktop. (I think that this is the option titled "arrange").
It appears that the secret to tinkering with the lines in the templates, is by unlocking the nodes to the lines, dragging them around, and then locking them in place again, saving them between major changes. In any case, none of this is going to be intuitive to users who come to the Mac from a text based 'DOS' universe. (I have absolutely no experience with Microsoft products, and would be lost if somebody asked me to do this from Windows.)
Now, I think I am going in the right direction, and I appreciate your help, but I'm still having a little difficulty switching back and forth from editing templates, and typing text in. What are the sequences of keypresses for going back and forth from editing the templates, and typing the text in?

HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

Hello all,
This is my first post here and I hope someone can help me.
We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
Thanks in advance for any help.
Fish

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Web page content is squeezed onto left side of page.

firefox worked great until I enlarged the fonts so I could read the words... sorry I am older and need larger text.
Ever since I get weird results on some websites.
Example: www.ibfx.com the entire right side (under the header and taps) of the page is black. can see nothing. Most details are squeezed onto the left side of the page. Links are still active but only 1/2 of the link is visible.
The page works just fine with Inet explorer but I want to use Firefox. I have tried deleting firefox and reloading it but that did not help. Also do not want to lose my saved links and bookmarks. Can you help? My email is [email protected]
Thanks, RobertJ.

Hi Cor-el... Thanks for your ideas .... however I still have the problem. I removed all cookies and cleared the cache. No help. It appears that the page is crowed over to the left side, as if force-fitting into a frame.
Also tried https but it made no apparent difference.
Have also run Ad-Aware and MalwareBytes... no problems there.
Ran a anti-virus check (Microsoft Essentials) that showed no problem.
Checked out the page on another browser (Chrome) and no problem there.
I have added a screenshot of the problem. It is a PNG file made with Win7 snipping tool. Maybe that will help? I have reduced that image so as to include the entire space.
Certainly appreciate your assistance. Any other ideas?
RobertJ.

Printing outlines: text all on left side of page

Similar Messages

Maybe you are looking for