Printing part color and part black and white

Hello Everyone,
I am wondering if you happen to know how to print part of the page color and part black and white. In other words, what I am looking to do is print a page, and be able to select how much of it is with color ink, and how much of it is just with black ink. Is there a way to do this? Even if its just choosing a half page to be one or the other.
Any info in regards to this would be great.
Thanks

John Danek wrote:
...Feel free to ask any "Print Design" questions like this here.
...and keep John guessing as to what software you are using.
My post was not to specifically discourage you from posting in this forum. It was to point you to a better forum that would yield more relevant answers. If you choose to post in this general print design forum, you may need to be a little less general with your question.

Similar Messages

With hp officejet 6500a, how do you print a color webpage in black and white?

With HP Officejet 6500A, how do you print a color webpage in black and white?

Autogyro wrote:
Charles Dyer wrote:
Apple didn't make the drivers. Apple doesn't make printer drivers and has not done so since they stopped making their own printers. HP made the printer drivers for that device. Apple merely publishes HP's drivers.
OK, but still, they built the poorly made HP drivers in their OS.
Ah, no. They published the only drivers HP gave them. If they didn't publish them, then Mac users would be unable to use HP devices at all, except for those devices supported by 3rd parties such as Gutenprint and the HPIJS Project. HP is solely responsible for the state of their drivers. And it's not just Mac drivers which are bad; a lot of Windows drivers stink, too. HP simply has a problem writing drivers. For the most part they have excellent hardware, but truly terrible software.

HT4356 How can I print a greyscale/fast document from my iPad wireless printer. It will print in color and high quality but want black and white

How can I print a greyscale/black and white document from my iPad wireless printer???
IT will print in COLOR and high quality print but would like to conserve ink (Esp. Coloured )
is there a way to reconfigure settings either on my iPad or the printer ??? Cannot find a setting
when u select print on the ipad it dos not allow you to change your settings before you print

There is no setting for this. You can request it here:
http://www.apple.com/feedback/

Help! How can i print a color document in black and white?

I have tried some of the other solutions found on Google but i still can not figure out how to print a color document in black and white on my macbook pro...can someone help me?

One of the print dialogue options is for a black-and-white draft, for both Safari and Word.

How to chose either you want to print a picture or document black in white or color?

How to chose either you want to print a picture or document black in white or color from your computer before printing; regardless of picture being colored or black in white.
I bought HP Laserjet Pro 200 Color Mfp m276 yesterday. I am completely new to printers and printing. My question is how to chose either the print out would be color or Black in white.
At my school liberary and public liberaries, when i print an image or document, in there printer drop down selection menu, they have the option of Color print or black in white print. I want to make mine same too. I have two printers there which is
1. HP Laserjet Pro 200 Color Mfp PCL6
2. NPI16FE39 (HP Laserjet Pro 200 Color Mfp m276NW)
I tried goint to Contol Panel>Drvices and Printers> HP Laserjet Pro 200 Color> printing preferences> and selected "Print in Graystyle"
than i printed from HP Laserjet Pro 200 Color; by selecting it from drop down menu, but the print out was still coloured..
PLEASE HELP ME!!
it may be something to do with printing settings..
I just want to select between Black in White and color ... before printing the page out (regardless of picture being colored)

Hi,
Here's a link to a thread with a similar issue on a different printer that might help.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How can I export to PDF for Offset printing including color and grayscale photo's?

After reading dozens of forum, I still don’t found the answer.
I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
How can I export to PDF for Offset printing including color and grayscale photo’s?

Yes, the Photoshop & ID CMYK working spaces are the same
This can get difficult because the 3 programs handle soft proofing differently.
The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
If I turn on Overprint preview I get a match because I'm soft proofing for print:

Yosemite load bar color changes / from black to white

Hello there,
is anyone experiencing the same as me?
When booting my MacBook Pro Retina Mid 2012 the load bar color changes from black to white. The color change happens as the keyboard background lights turn on. After this I get to the login screen with the blurred desktop background image (seems normal)
Video: https://vid.me/hOX
(sorry for the vertical video)
I know that the load bar is a feature of Yosemite, but not with the color changes.
I did a clean install of OS X Yosemite with the AppStore download and the Diskmaker X Tool.
Thanks for answers...

No
With a very advanced photo editor like PhotoShop and lots of skill you could do that
It is certainly not a simple operation if it is just a B&W image with no color information
LN

How best to print a color photo in black and white

I use the Black and White adjustment on a series of colour photo's I've taken. However when I go to print the photo's, colour still comes out in the print. Anyone know what I'm doing wrong?

It might be a problem with your printer's color profile. Did you try to set the color profile in the print dialogue to "black and white" (choose: "more options" in the print panel) ?

My c5180 will print in color but not black and white

I can't print in black and white with my HP Photosmart C5180 all in one. I put in a new cartage and it still only print in color without black ink. I've tried all the buttons in HP Print and Scan Doctor but I don't know what it is that I should like at. So I can't tell if it fixed it or not. Should any of them have black in it. I've tried uninstall and reinstall the drivers that did not work. When I use HP solution center I used the “align the print head” the box form left to right blue, red, and yellow all are light in color and the four is brown. Can anyone help

Hello,
Please perform the below mentioned steps that should resolve the issue.
Press the SETUP ( Wrench tool ) button, then
Press TOOLS , then
Select CLEAN PRINTHEAD and press OK button.
You might have to try the above step for 2 -3 times.
Check if BLACK is being printed.
If issue still persists, please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Not able to choose to print in color instead of Black and white

Good afternoon!
I have a HP photosmart 5510e and i am running a windows 8.1. I am trying to print some photos but i am unable to have them print in color. I have looked all through the settings on the printer but i dont get an option to change it

Hi,
It sounds like your printer is operating in grey scale mode. I've included a screen shot below of what the grey scale/colour toggle looks like on my Windows 7 setup.
You can check that you have the most recent Windows 8 drivers here
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Color Report prints in Color from Viewer, Black & White when send to PDF

RE: Crystal Report sent to PDFBlaster
Hi,
I have a Crystal Report that contains a Color Logo. The particular problem that I am facing concerns sending the report to PDFBlaster.
When PDF BLaster is selected as the "PRinter" from the Crystal Viewer Print Button, the report is rendered in color. However if the PDFBlaster is selected from my Windows form, and SelectPRinter is used to print the report to PdfBlaster, the report is rendered in Black and White.
I noticed that this happens if my default printer is Black and White printer. IF the default printer is color , then the report is rendered in color regardless of whether it is printed from the Viewer or not.
Is there a setting that I can use to preserve the Report's properties? It seems to me that I am losing the "color" properties of the report when I use the ReportObject.SelectPrinter method.
Thanks in advance for help/advice.
Sri

Hello,
Moved to Legacy SDK forum.
You did not say what version of CR and I don't believe this is .NET either so I moved your post where the RDC is posted. In any event what you discovered is what likely you need to do. Add another printer and set the default option to print color. Then when your app selects the printer use that printer.
CR Engines do not have a specific API to set the Color option, you select/set it in code first.
Thank you
Don

Transfer signature to InDesign (in color and white reverse)

I scanned a signature, saved it in Photoshop. I want to copy and paste it into InDesign as a color and also as white reversing out of black. I can't get rid of the background! I am sure this has a simple solution, but I can't seem to manage. Laure

I don't know what I am doing wrong, but I just cannot get rid of the background. I have to admit that I am not great with layers... I know, I know, how could that be? But, I open the file, double click on the layer then hit delete. The signature goes away, and I see a checkerboard where the signature was and the white paper around the signature. One thing I did earlier, after scanning, was rotate the signature slightly creating a black area in the negative spaces. Does that make a difference?

When I print a few pages of a document the pages are color reversed ie black backround white letters. Why?

When I have a document lets say 10 pages and I want to print pages 3 through 6, the pages come out black backround white letters. Why?

Hi James,
Since when are you facing this issue?
Does this happens with the specific pdf file or with all the pdf files?
Did you tried printing any document using any other program? if yes, does the same problem occurs?
Regards,
Rahul

Firefox 5 not printing background (colors and images) despit it's selection in Page Setup. Previous version worked fine.

I upgraded to FireFox 5, but it is not printing background (images and colors) for certain pages which previously printed fine with my earlier version. Print Preview DOES shows the background images, but when sent to printer or PDF, background images do not appear in the printed output.

I wish it were that but a long time ago when I had a problem with the gadgets with iGoogle back 6 months ago thereabouts I was asked to disable it then and I did and I just went to re-check and it is still not enabled, however, it will not let me un-install it though.. It only gives me an option to enable or disable.. Any advice ? So I'm wondering if it is something else still or is there a problem with the avast still ?
thanks again for your help. Mind you that this all started when blogger went down ..
take care

How to print diffrent color and diffrent size of text in JTextArea ?

Hello All,
i want to make JFrame which have JTextArea and i append text in
JTextArea in diffrent size and diffrent color and also with diffrent
fonts.
any body give me any example or help me ?
i m thanksfull.
Arif.

You can't have multiple text attributes in a JTextArea.
JTextArea manages a "text/plain" content type document that can't hold information about attributes ( color, font, size, etc.) for different portions of text.
You need a component that can manage styled documents. The most basic component that can do this is JEditorPane. It can manage the following content types :
"text/rtf" ==> via StyledDocument
"text/html" ==> via HTMLDocument
I've written for you an example of how a "Hello World" string could be colorized in a JEditorPane with "Hello" in red and "World" in blue.
import javax.swing.JEditorPane;
import javax.swing.text.StyleConstants;
import javax.swing.text.StyledEditorKit;
import javax.swing.text.StyledDocument;
import javax.swing.text.MutableAttributeSet;
import javax.swing.text.SimpleAttributeSet;
import java.awt.Color;
public class ColorizeTextTest{
     public static void main(String args[]){
          //build gui
          JFrame frame = new JFrame();
          JEditorPane editorPane = new JEditorPane();
          frame.getContentPane().add(editorPane);
          frame.pack();
          frame.setVisible(true);
          //create StyledEditorKit
          StyledEditorKit editorKit = new StyledEditorKit();
          //set this editorKit as the editor manager [JTextComponent] <-> [EditorKit] <-> [Document]
          editorPane.setEditorKit(editorKit);
          StyledDocument doc = (StyledDocument) editorPane.getDocument();
          //insert string "Hello World"
          //this text is going to be added to the StyledDocument with positions 0 to 10
          editorPane.setText("Hello World");
          //create and attribute set
          MutableAttributeSet atr = new SimpleAttributeSet();
          //set foreground color attribute to RED
          StyleConstants.setForeground(atr,Color.RED);
          //apply attribute to the word "Hello"
          int offset = 0; //we want to start applying this attribute at position 0
          int length = 5; //"Hello" string has a length of 5
          boolean replace = false; //should we override any other attribute not specified in "atr" : anwser "NO"
          doc.setCharacterAttributes(offset,length,atr,replace);
          //set foreground color attribute to BLUE
          StyleConstants.setForeground(atr,Color.BLUE);
          //apply attribute to the word "World"
          offset = 5; //we include the whitespace
          length = 6;
          doc.setCharacterAttributes(offset,length,atr,replace);
}

Colored and white lines across iPad screen

Ok so I got home from work and I pulled my iPad out of my laptop bag and I noticed that when I turn it on there are like these colored lines and also this big white bar across the screen. Why are those things there?
http://www.flickr.com/photos/53513466@N03/4946889384/

My son bought the original ipad in November 2010, it is now only a few weeks out of warranty. He turned it on tonight and as other people have mentioned on this forum the ipad now has coloured lines across the screen. I called customer services and I must say i am extrememly disappointed with the response I got. They offered me a replacement for £260..... no other explanation other than it may be a hardware problem. After paying £600 for the original ipad only just over a year ago I would expect better from Apple. Myself, my husband and my three children all have iphones and other apple products but I must say if this is the support you get then I would consider other options in the future. Very disappointing....... If anyone else other than a customer service agent who reads from a script can help then please get in touch. Thanks

Printing part color and part black and white

Similar Messages

Maybe you are looking for