Printing Passport photos with PSE 9.0 for Mac

I just changed from Windows to Apple and thus changed Photo Shop Elements. In the windows version i was apple to print a sheet of passport photos when I went to the print package, but that package does not appear to be there in the Mac version. Any suggestions1
TIM

I do not see that at all. Now I do have Photeshop CS5 on my computer to learn
how to use it, but I also Photoshop 9 elements
maybe that is the problem
thanks for helping
tim
Tim Kavulla
3607 Plum Hollow Drive
Houston, TX 77059
(H) 281-480-4715 (c) 832-444-2675
[email protected]

Similar Messages

Printing Passport Photos

I am trying to print passport photos on my HP t550.uk computer (Windows XP) using an HP C4280 printer using Photosmart Essential 3.5 on the multiphoto x6 template (printing on to 6x4 paper should accommodate 6 photos), but the dropdown menu on paper size is limited to A4 /A4 Borderless.
I've tried altering the settings to 6x4 paper but the computer keeps telling me it cannot accept those revised settings in the template (saying Photo Template only supports A4 size paper)
I'm sure that I did not have this problem when I printed off similar photos some time ago.
What am I doing wrong?
Also on accessing Photosmart the default setting for access to viewing the photo library is set to Date rather than Folder, as it used to do.
Have there been patches auto-downloaded which have changed the defaults settings, and if so how can I change them back?
Any help appreciated!
Roger

When you print in iPhoto, there are a couple of ways that you can print the same image several times on one sheet. The easiest is to use the Style menu.
Select your photo, then choose to print. In the print dialog that appears, there is a Style menu. Here there are several options that will print the same image multiple times on a single page. Both N-Up or Contact Sheet allow you to enter how many times you want the image, however you don't have much control over the printed image size. If you need to ensure you have a passport size photo, then use the Standard Prints option, input the size of the photo and the number of duplicates.

What is the best display setting to use with a sanyo projector for Mac OS x 10.8.3

What is the best display setting to use with a sanyo projector for Mac OS x 10.8.3

You would use whatever the native settings for the projector are.
Regards.

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the software on a second computer. But I also read lately that I will only be allowed to work with one computer. I want to work on both of my computers without de/installing and de/activating the software every time. Is this possible? Thank you!!

You should be able to install the products on two computers as long as they are not running at same. Also the platform should be MAC.
You may download the product from
Download CS6 products

Does Time Machine conflict with Crashplan offline backup for Macs?

Hello,
Has anyone experienced Time Machine on Macs conflicting with Crashplan offline backup for Macs? I would like to run both on my iMac... Time Machine for local backup to my E-drive and Crashplan for a backup to their servers.
Thanks

This article may be of help to you:
http://support.crashplan.com/doku.php/articles/time_machine
I also want to point out that CrashPlan also supports local backup.

Printing passport photos in Photoshop Elements 11.

I want to print a set of 8 passport photos on a single sheet of A4 paper. I have already sized it as 3.5cm x 4.5cm and I am having problems using Adobe Photoshop Elements 11 in Editor mode.
Does anyone know how to do this?

The 'media' choice is the answer for your custom organization.
The organizer lets you organize by categories, subcategories and tags. That is a three levels hierarchy you can create freely.
You might need more than 3 levels, but that's not really a problem.
Hierarchies are handy when you know you'll have hundreds of tags to choose from. It's easier to select them from a list.
But you should think of two other ways other than hierarchies to achieve fine selections :
- Adding captions and notes, that enables quick text search in PSE11
- Combining tags in advanced search mode. You don't need hierarchies to search for a product type with a given material and a given creator introduced in a given year...

Consistently size employee photos with PSE 9

I have PSE 9 and would like to use it to consistently size all employee photos for ID badges. For example, after taking the employee’s picture, it would be uploaded/dragged into PSE and cropped appropriately, then saved at the ideal size. Overtime, this would involve hundreds of photos so it’s important that all photos be consistently sized for importation to the ID badge application and to use with Outlook email active directory. Years ago this was accomplished by creating a template in Photoshop, which I do not have. Can this be done with PSE and if so, can someone provide instructions. I’m new to this… Thanks

Thank you. I'm looking more at bringing in the raw image and crop accordingly. I want each photo when all is said and done to be the same size. For example, I take photos of a new employee today for ID badge purposes. I import the raw image into PSE, crop, save as a jpeg, and upload into the ID badge program. Tomorrow, I take another photo of a new hire employee and repeat the steps. Next week we get new employees and repeat the process. I would like to develop a process that would consistently make the cropped employee photos uniform each and every-time.

How to print boderless photos with 6525 printer from Windows 7

Regardless of whatever setting I use with the 'Advanced' print menu in Windows or within Adobe Photoshop Elements 10, I STILL get a border around every print. I've even set 'Custom print size' in Photoshop to the full 7 x 5"- and the on-screen preview image shows the paper size correctly filled without a border - but the printer still gives a border, like it or not!
HELP!!!

Hello Suffolkman,
Welcome to the HP Support Forums!
I understand that you are trying to print a 5x7 borderless photo with the Photosmart 6525, but it will not despite the setting you have entered.
The 5x7 paper does support borderless, I was able to print one fine. You mentioned applying this under the Advanced setting, was this the area?
If not, you can access this by right clicking on the printer from Devices and Printers, then Printer Preferences.
Have you tried to print the photo from Windows Photo Viewer?
Also, the HP Print and Scan Doctor is a great to you can utilize to ensure the drivers and software are functioning as they should.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing MySpace photos with Elements 4.0

I can go to MySpace and print a photo directly(4X6) and it is fine. I save the photo from MySpace as a JPEG (not allowed to set any parameters) and bring it into Photoshop Elements 4.0. When I try to print 4X6 it is pixelated and very fuzzy. I can print it very small (like 1X1) and it's fine. Any ideas how I can get a good 4X6 printing out of Photoshop?

[email protected] wrote:
> I am trying to make a number "2" out of 2 pictures of people. One will be the straight line at the bottom of the number. THen I would like to bend or "warp" the other one like the top of the two. Any thoughts?
>
> Thanks
> Kimberly
>
Kimberly,
I rather liked what you were trying to achieve but didn't like the
bend and warp bit so I tried this.
1. I started with a new blank, transparent 2" x 3" set at 300
pixels/inch you can of course choose anything to suit your needs
2. I used the text tool to type in the number 2 in black. Use any
suitable chunky font for this.
3. I then selected the 2 and stretched it to fit whilst holding down the
shift key to maintain it's original proportions.
4. Open up the two pictures you want to use for this exercise and make
sure they are both sized to 300 pixels per inch or the same resolution
you chose in 1.
5. Copy both pictures as new layers above your number 2 layer. I place
the image(s) on the edit workspace and then just drag this picture over
my Number 2 picture in the photo bin for this but you can go through the
clipboard in the normal way.
6. I then lowered the opacity of the pictures so I could see the number
2 and then just repositioned the pictures to fit the number. You can tug
them about using any of the transforms if you wish.
7. Set the opacity back to 100% for the picture layers
8. Group the top two picture layers with the Number two layer. Only the
pixels not above the transparency will then show through just showing
the number 2.
You group by holding down the left Alt key and then clicking on the
junction between the layers you will see the pointer change to indicate
all is ready.
Maurice

Print multiple photos with captions

I cannot find a way to print 4-6 photos with captions. Instructions say to click on More Options on bottom of dialog box. when i click on that, only color management is an option. This is after selecting Picture package. please help.

PS Elements 6 with Windows XP sp2. I tried the organizer but would go with either one that works. What I want to do is print between 3-6 photos on a plain white piece of paper, enlarged to fit the page with captions under each photo. I have used Word to do this but thought an all in one would be better. Thanks for any help you can provide.

How to print regular photos with photo creation

I installed Photo Creation, and I want to print photos, I don't want design, how can i print normal prints.
Thank you

Hi Maricris.
To print plain photos in HP Photo Creations, select the Prints project rather than the Collage Prints project. (Collage prints let you place up to 60 items on a page, including photos, graphics, and text.)
Here's a step-by-step guide to making single plain prints in sizes from 4x6 up:
http://h30434.www3.hp.com/t5/Home-Web-Printing/How-do-I-print-4X6-with-tab-photos-1-per-page-with-NO...
HP Photo Creations doesn't have a preset for wallet-size prints, so in that case, you can use the Collage Prints project to group multiple copies of the same photo on a page. Here's how:
Start with the Plain White theme. It's in the Contemporary category.
Add your photo.
Click the Photos tools and then the Used Photos tab. You'll see a small version of your photo there.
Click the photo in the Used Photos area several more times to add multiple copies to the layout. In the example below, we added ten copies total.
Click the Design tools. Then click the Photo Layouts tab.
Select the Basic category and then click the fourth preset. It looks like a big square. Your photos should line up as shown below.
Thanks for trying HP Photo Creations,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Where can I find a print driver compatible with OS 10.7 for USB HP LaserJet P1006?

Where can I find and download a print driver compatible with OS 10.7.5 on iMac for USB HP LaserJet P1006?
Ran software update. Apple notes that a driver is unavailable, consult HP (who seems to offer only info but no software download available).
Any troubleshooting info or hints are appreciated.

Hi LPfromMA,
I'm sorry to hear you've run into difficulties finding the driver for your HP Laserjet P1006 for your Mac OS X 10.7.5.
I have included a document with the steps to download and install the driver for your printer and your Mac. It has a section for a USB connection. I have also checked HP.com and there is driver for Mac OS X 10.7.
OS X v10.7 Lion: Installing and Using the Printer with Lion
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02911238
Happytohelp01
I work on behalf of HP

Help for using camera raw in PSE 8/Bridge for Mac for the Canon 7D

Recently purchasing the Canon 7D, taking a few test photos in Raw, then trying to use Camera Raw in PSE8/Bridge for Mac is a problem. I cannot figure it out. Can anyone help this frustrated, novice computer user?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

How do I create a 20x30 JPEG custom photo collage in LR 5 for Mac?

Hello - I am trying to create a custom layout for a 50th anniversary collage in LR 5 for Mac. However, my page setup only includes print sizes that are compatible with my printer. I plan to save this layout in JPEG to be uploaded to a photo finishing company. I want to start with the large-size canvas but I can't figure out how to do it. I will not be using any of the installed templates. I plan to organize the photos one by one in a custom way. Can this be done in large format?

Re: templates

OpenGL in PSE 8.0 for Mac?

I can't seem to figure out how to enable OpenGL acceleration in Elements for Mac. When I look under "System Info" it says disabled and I would like to enable it. Any ideas?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

Printing Passport photos with PSE 9.0 for Mac

Similar Messages

Maybe you are looking for