Printing pdf border issues...

hello. When attempting to print a pdf, and I chose "Scale Each Page To Fit Paper" option from the Print Preview window, the bottom of the page gets cut off (it's actually the left margin because I'm printing a horizontal image)
Yet, in the actual Print Preview, it shows that it is not cut off. It all fits on the page.
I originally thoughts that this was because in the Print Preview windown the orientation was set to the Vertical option, but if I change the Orientation to horizontal, then the right side of the page gets cut off instead of the left.
Shouldn't "Scale Each Page To Fit Paper" make it fit the paper?
My only resolution has been to uncheck the "Scale Each Page To Fit Paper" option, and manually scale down the page to 60%.
How can I resolve this?
thank you.

i should mention that the issue i have with having to scale down to 60%, other than it being one extra step which shouldn't be necessary, is that when its scaled down to 60%, i have huge margins on all 4 sides. That's a waste of space, and makes my image smaller than I want it, on paper.
When I use the "Scale Each Page To Fit Paper" option, 3 sides of the image fit on the paper just fine, and go almost to the edge, which uses more of the paper, of course allows me to not have to minimize the image as much. The problem is that the one side gets cut off, but not by much. Just a few milimeters. So it's either that, or have huge margins which look silly.

Similar Messages

Issue printing PDF Packages

I'm having issues printing PDF Packages.Clients have contacted us stating that our PDF Packages don't print properly. Essentially they were only able to print the "coversheet" and nothing else. I ran some test scenarios and noted that PDF Packages print feature behaved differently depending on several criterias:
how it was viewed (ie: desktop, Firefox browser, IE browser)
what Adobe Reader Plugin
what command was used to access print feature (ie: file>print, ctrl + P, print icon)
So far I've noticed that Adobe Reader utilizes two versions of the Print Dialog Box. The first one shows four choices for "Print Range" (All, Current View, Current Page, Pages...) seems to always be misconfigured and does not print as intended. The second one I've noticed seems to limit your Print Range choices (All, Current View) which usually works.
This seems to be an Adobe bug. This Print Bug exists on both Acrobat 8 and 9, and the bug may or may not exist depending on how you view the "PDF Package" (ie: Desktop, Firefox, IE).
If you open the PDF Package on your desktop and view via Adobe Reader for the most part it prints as expected for "Print Current Documents" or "Print All Documents". Although the "Print Range" is misaligned (ie: "Print All" behaves as "Current View", "Current View" behaves as "Current Page".
If you open the PDF Package on a browser with an Adobe Reader plugin, a different scenario occurs.
You might experience that you're locked into printing only the "coversheet" of the PDF Package.
And again your "Print Range" might be misaligned.
In Adobe Reader 8, a dropdown appeared when you selected "File>Print" or the "Print Icon". The dropdown then gave you an option to "Print Current Documents" or "Print All Documents". Which basically provided you an option to print the entire "PDF Package" or choose to print only a section of the "PDF Package".
In Adobe Reader 9, the option to choose between "Print Current Documents" or "Print All Documents" was removed.
In fact I started to document the instances to see if its an isolated issue and it looks like it fails to print (as intended) 60% of the time. Of the 40% that does print as intended... it looks like half the time the "Print Range" is misconfigured.
Also, I've noticed that Reader utilizes two different "Print Dialog" boxes.
The testing scenario I set up was that you can print in three different ways:
    1. File>Print
    2. <ctrl + P>
    3. <print icon>
Three ways to view the PDF package:
    1. Download PDF Package & view on your desktop via Adobe Reader
    2. View PDF Package on Firefox w/ Adobe Reader plugin
    3. View PDF Package on Internet Explored w/ Adobe Reader plugin
My computer is using:
XP Pro SP3, Acrobat Reader 9
I've also spot tested on:
XP Pro SP3, Acrobat Reader 8
Vista, Acrobat Reader 8
Any Ideas?

Hi Greg,
Since this is sytem defined settings that you are trying to implement, I presume that the INI changes ought to be done in FSISYS.INI rather than the FSIUSER.INI.
Apart from that most of your INI changes look fine as we are also using pdf as our Output type. Please find the INI change swe have implemented in our system for printing pdf.
Device = ..\Print\Prt.pdf
Bookmark = Yes,Page
Compression = 0
DownLoadFonts = Yes,Enabled
LanguageLevel = Level2
Module = PDFW32
PageNumbers = Yes
PrintFunc = PDFPrint
PrintType = PDF
SendOverlays = No,Enabled
SendColor = Yes,Enabled
PrintViewOnly = No
SplitText = No
SplitPercent = 50
TextCommentOn = FORMSET
Papersize = 0
FontCompression = 1
Hope this is helpful.
Thanks,
Akhil

Sudden issues with adobe X on mac OSX 10.7 when printing PDFs

Everything was fine until an hour ago, when I tried printing a PDF and I got the error "Adobe quit unexpectedly. Click the reopen the applicaiton again"
When I checked Show Details, this was listed
Exception type: EXE_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00000000000012
I cannot print documents, documents with markup, and documents with stamps, I can , as a workaround, print PDFs as images.
I don't believe the issue is with the HP printer or the Ricoh Copier - it's with Adobe. I cna print to both of them from the same computer in other applications.
I don't think the issue is memory as this is the only app that is crashing.
No updates were done recently. The PDfs in questions are standard PDF - nothing special about them. I even created a new PDF with only the word Test on it and that crashed as well.
Please advise.

Have no idea if you are talking about Acrobat or Reader. There is no Adobe program. In any case, do a repair to the application and see if that helps.

Issues printing pdfs

Hi we have some users that when printing pdf CAD drawings things like dashed lines are turning out solid. I've found a "fix" for it but this seems to be a bandaid solution and I'd rather know why its going wrong and have some way to resolve it properly.
It seems to only affect some users with some printers. We are on Windows XP and Adobe Reader 8 - the users with the issue also seem to have Adobe Pro 8 installed.
The fix I've found is to change their current distiller setting to have a compatibiltiy of reader 8 - as it defaults to reader 5. This seems to fix the issue - but I'm not sure why it would - isn't distiller only used when actually creating PDFs? (ie not printing existing ones?)
Because we have a lot of users I wonder if the solution to change all their compatibility to version 8 is a reasonable one - or is something else the issue? Eg the creation of the PDFs in the first place?
Any advice appreciated.
Paul Thomsen

Good day Paul,
You are correct that Distiller is only used when creating PDF files, but not when printing them. I'd recommend that if you're users at typically printing from Adobe Reader, that you upgrade to Adobe Reader X.
However, you may want to try turning on the Print as Image option within the Reader 8 print dialog box to see if this improves your printing.
Good luck!
Kind regards,
David

Newest Adobe Reader not working with 8.1 IOS...Adobe icon does not show when pdf docs are saved...also printing pdf documents take forever. I uninstallled and reinstalled...issues continue

Latest AdobeReader not working properly with 8.1 IOS...Adobe icon does not show on saved PDF's and printing from PDFs takes forever. I uninstalled and reinstalled latest Reader

zoer1,
Adobe icon does not show on saved PDF's
Would you provide more details about the problem? A screenshot would be helpful.
The following FAQ document describes the steps to add a screenshot to your forum message.
How to add a screenshot to a forum message from iPad/iPhone
Regarding printing PDF documents...It depends on the PDF document that you are trying to print. In general, it will take longer to print more complex and larger PDF documents.
If you are willing to share your PDF document (that takes forever to print) with us at [email protected], we can test it with the same version (11.6.3) of Adobe Reader on different iOS versions (iOS 7.x vs. iOS 8.x). Please include the link to this forum (https://forums.adobe.com/thread/1616231) in your email message for reference.
Actual printing is handled by iOS (not by Adobe Reader) via AirPrint over Wi-Fi connection. We've heard from other users about iOS 8 Wi-Fi connectivity problems.
You may also want to search for similar issues on Apple Support Communities.

Can't print PDF docs when never an issue before...

Before I updated the Ver. 10 I had installed on my computer, I never had any problems printing PDF documents. Now, I hit the "Print" button and get nothing. No printed document, no "Error" pop-up, NOTHING! I have an HP LaserJet 4050 connected to USB. All are good. I have troubleshooted using Adobe's website, and uninstalled and re-installed Reader Ver. 11 on my computer. I was able to hit the "Print" button on the User Agreement and it printed fine. I can print Word documents with no problem, and even internet sites. Bring up any other PDF document that I used to be able to successfully print, and I STILL get nothing. Any suggestions??

Pat, that did not fix the problem. I still get the messages that the document cannot be printed and that no pages are selected; the print dialogue box shows that “all” pages are selected. I get the message even if I manually select “pages 1-7” etc. I tried deleting Adobe and reinstalling it but I get a 1311 message that seteup.exe cannot be located. I tried downloading just the Adobe Reader printer drivers from your site and get a message saying that the download was not successful. Please help.
Mark P. Brewster
The Brewster Law Firm
The Benchmark Building
13526 George Road, Suite 210
San Antonio, Texas 78230
Phone: (210) 437-1232
Fax: (210) 437-1233
The contents of this message are privileged and confidential attorney client communications and work product.If you have received this message in error, please contact me to let me know, and please delete the original message.

Issues with printing PDF files from an ADOBE application

When printing PDF files from an Adobe application, some of the characters are lost and do not print. What can I do?

Please don't post the same question multiple times!

I am having issues printing PDF documents on my HP CM1312nfi

Whenever I print a PDF that I have created by scanning from my CM1312nfi it has difficulty printing it. It will print one page then read ERROR in the printer set up on the computer and 90 seconds later it will then print the next page and do the same thing. So if I have a large PDF it can take hours to print 1 copy.
I do make sure to use the print production features is Acrobat as well as reduce the file sizes dramatically but this doesn't seem to help the situation. Anyone have any thoughts??

Please read this document reference printing PDF files and slow printing.
Adobe PDF files print slowly or hang in queue
If you print alot of Adobe PDF files and you currently don't use a postscript driver, you may need to switch to that.
1312nfi drivers
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

My printer starts out printing PDF files in english and switches to random characters.

Hp officejet 6310 ALl in one printer. WHen printing PDF files, the part or all of the first page prints out in english and the balance is random characters. What is going wrong.

The troubleshooting steps here may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print PDF file from folder using SSIS

Is there a way in SSIS to print pdf file from folder?
ANy help much appreciated.

One method is calling Adobe Acrobat Reader exe from Execute Process Task within SSIS passing the document path as the argument
The command and arguments will look like this
http://geekswithblogs.net/JeremyRamos/archive/2013/10/22/print-ssrs-report--pdf-from-sql-server-agent-or.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Printing PDF forms to an impact printer

Greetings,
I hope I've found the correct forum for this question.
We are having difficulty printing PDF forms to an impact printer. We are required by regulations to print to multi-part forms from our GTS landscape, which is going live soon. Since Adobe is the direction SAP is headed with forms, we have been utilizing ADS. However, the need for impact printing has presented a problem. Has anyone utilized PDF printing to an impact printer? I'll list some details in case it will help.
Printer: Lexmark Forms Printer 2590
Backend Print Solution: HP Output Server on AIX
SAP GTS: NetWeaver 7.0 SP17 w/ SLL-LEG 720 SP7
Our printer has printer languages of Epson Emulation and Personal Printer Data Stream (PPDS). Neither of these are included in the standard device types for PDF as specified in OSS Note 685571. I do not see an appropriate XDC file to copy and modify.
Has anyone else run into this issue and found a resolution?
Many thanks for your assistance.
Wesley Tollett

the PortName should be changed accordingly.
if you are using printer port , commonly lpt1, you should change it to lpt1
ur command line could work , i think
i've tried it locally in my machine, it works fine.

Report Rendering (Print & PDF) trashes report that looks fine on screen

Since installing SQL Server 2012 SP2 CU3 (11.0.5556) a number of reports look fine on screen but when printed or exported to PDF the format is totally altered so that either many blank lines are inserted between lines, or lines are squashed together. It
doesn't affect all reports. Reports (both affected and not affected) use Tablix with both Row Groups and Column Groups. There is no obvious consistency between those reports that are affected.
All of our SQL Server instances are hosted on VM-Ware virtual servers.
I've raised the issue via Microsoft Connect: https://connect.microsoft.com/SQLServer/feedback/details/1063641/report-rendering-print-pdf-trashes-report-that-looks-fine-on-screen
Any thoughts or workarounds? Is this a bug?
Thanks!

Hi nsam,
We installed the sqlserver 2012 sp2 cu3 in our lab, but unfortunately the issue cannot be duplicated, so I provided the following options for your reference.
1),Please help to provide a way with detail steps to duplicate the issue.
2),If you don't know how to duplicate the issue, please try to remove the sqlserver 2012 sp2 cu3 update by the following steps to see if the issue can be fixed.
In Control Panel, open the Add or Remove Programs item.
2. Click Change or Remove Programs .
3. To see all the updates for the SQL Server 2012 installation, click to select the Show Updates check box.
4.Uninstall the cumulative hotfix package.
3,)Please visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone

Print PDF from web without opening A.R.

Hi, I'm looking for a way to print PDF documents (generated in Crystal Reports 11 on a IIS web server in PDF / ASP.NET Framework 2.0) on client's machines and printers (without opening an Acrobat Reader, but with print options dialog).
Is it possible to make this issue using Adobe Acrobat SDK?

For security reasons (eg. so that malicious web servers can't just start your printer a printing...), it is IMPOSSIBLE for the document to NOT show...
Any document that is on the web can be saved on the client's machine - that's the beauty (or not?) of the web and the protocols involved. If you wish to prevent misuse - be sure to use DRM.

Adobe Acrobat Pro failed to print pdf file

I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
I do not know other alternatives for solving this issue.
Your help will be very much appreciated.
Thank you!
Erik

It seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here.

Orarrp can't print pdf file directly to printer

oracle remote print utility (orarrp) can't print pdf file directly to printer.
we expect orarrp utility can handle ".rrpa" file (i.e. pdf file generated on the application server) by directly print the file to the client's printer, i.e. invoke the acrobat reader on the client side, display the the printer selection dialogue, after confirmation print the pdf file, then the acrobat reader close automatically nicely.
However we are disappointed as the acrobat reader startup and display the pdf file content but does not print and does not close.
After testing the problem several times, there are some findings:-
Finding (A):-
(a) for the success of direct printing of pdf file, a physical path must be provided; we have tried 2 methods:
1) using drag & drop to copy the pdf file directly to the browser
2) open pdf file in the browser directly using browser menu-->File-->Open.
(b) for the failure of direct printing, a virtual path is involved and we have also tried 2 methods:
1) when web.show_document() is used
2) enter the url to the URL bar of the browser,
eg. http://appsvr.com:7777/report/test_printout/APPSVR1094707.rrpa (this is a virtual path/url)
Finding (B):-
(a)when the physical path is used, a temporary pdf file is generated in the same directory where the rrpa file exists in the application server,
e.g. in application server: d:/printout/yyy.pdf is generated for d:/printout/xxx.rrpa when direct print occurs
(b) however when the virtual path is used, there is no such temp "pdf" file generated and direct print failed.
May be when virtual path is used, orarrp utility don't know where to generate the temp "pdf" so direct print doesn't occur.
So, anyone has similar experience or further queries or has solutions, please join.
Thanks for your attention.

Hi,
It is really late to give response this post. But still who ever refering to this post for the same issue this solution is useful for achieving same in background:
Even same can be used in smartforms, for getting spool request in PDF format as well which will decrease the size of file when printing in SAP printer.
ct_tline is PDF output:
DATA: lv_pdfsource TYPE xstring.
FIELD-SYMBOLS:<p> TYPE x. " <p> type any.
LOOP AT ct_tline INTO cs_tline.
ASSIGN cs_tline TO <p> CASTING TYPE x.
CONCATENATE lv_pdfsource <p> INTO lv_pdfsource IN BYTE MODE.
ENDLOOP.
* ->Create spool request in PDF format
CALL FUNCTION 'ADS_CREATE_PDF_SPOOLJOB'
EXPORTING
    printer = 'LOCL'            "Printer name supporting PDF device type
*   DEST     =
    pages    = 1
    pdf_data = lv_pdfsource        "XSTRING internal table
*   NAME     =
*   SUFFIX1 =
*   SUFFIX2 =
*   COPIES   =
*   PRIO     =
    IMMEDIATE_PRINT         = 'X'
*   AUTO_DELETE             =
*   TITLELINE               =
*   RECEIVER =
*   DIVISION =
*   AUTHORITY               =
*   LIFETIME = '0'
* IMPORTING
*   SPOOLID =
* EXCEPTIONS
*   NO_DATA = 1
*   NOT_PDF = 2
*   WRONG_DEVTYPE           = 3
*   OPERATION_FAILED        = 4
*   CANNOT_WRITE_FILE       = 5
*   DEVICE_MISSING          = 6
*   NO_SUCH_DEVICE          = 7
*   OTHERS   = 8
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.

Printing pdf border issues...

Similar Messages

Maybe you are looking for