Printing PDF's from USB memory stick on HP C7180

Hi all,
Currently I'm away on business and my partner requires to print some documents. I would like to explain to her how to do this but without having the printer in front of me, I am struggling.
I have printed PDF's on my C7180 from a USB memory stick before, but I have forgotten how to do this. Could one of you guys explain how to do this step by step so I can relay this back home.
Thanks in advance..
Matzukengren.

Hello Matzukengren,
Welcome to the HP Support Forums! I would love to walk you through printing pdf files from your USB drive on your HP Photosmart C7180. I would like you to open the link below to get started:
Printing From a Memory Card or USB Flash Drive
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

PM8M-V will not boot from USB memory stick

I'm using a PM8M-V mainboard and would like to boot from a USB memory stick (disk2go Pure T5, 256MB). The memory stick is bootable and properly formatted. The stick works fine with any other mainboard that I have tested so far. However, with the PM8M-V I cannot get it to work. (Other makes/models of memory sticks have been tested as well, but to no avail.)
Can anyone help?
I suspect that this is related to the fact that the PM8M-V BIOS does only support USB sticks as 'floppy drive', whereas on all other mobos I had to configure it as 'hard disk'.
Any help would be appreciated.
Best regards,
meter

Check in BIOS and see if the USB thumb drive is being recognised in the Boot Priority and whether you've select USB Device Support to "All Devices".

Clean install of windows 7 - how to install drivers from USB memory stick?

I purchased a Toshiba Satellite C50 loaded with windows 8 but want to revert to windows 7.
I have downloaded the necessary drivers and have mounted the .exe files onto a USB pen for installation.
Before I proceed to wipe windows 8 I'd like to know - if I install 7, will my trackpad stop functioning?
If so, how do I install the relevant drivers from the USB pen?
Thanks, John

99.9% sure that W7 will identify the trackpad and install it. You just run the exe's using file explorer or Start >Run then browse. You may decide to leave the laptop as the W7 install left it but you should check Device Manager to ensure there are no unrecognised devices

I'm new to apple after years of MS OS! How do I transfer files from my USB memory stick to another USB memory stick? cheers

hi all, i've just switched to apple after many years using MS OS! I'm now using iMac desktop 21.5" with 2.9GHz processor and latest Yosemite software.
How do I transfer files from one USB memory stick to another USB memory stick on the iMac? cheers, linley94

Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
CHEERS
DON

OS X Snow Leopard install from (non-boot) USB memory stick

oi~
just bought this second hand and after i finally got into it (the seller forgot name/password) it turns out the DVD drive is malfunctioning, i was able to watch part of a movie but it will not boot from it nor let me install from DVD. (seller is not calling me back or responding to anything i sent) bottom-line for now i can live without the DVD drive but i would like to install OS X Snow Leopard.. can i copy the DVD contents onto a 8 GB USB memory stick (using a Vista pc) and install from the USB stick ? it does not have to be bootable as i realize to do that you must use the Mac.
i also have a old(er) iMac, maybe i can use that copy copy contents (if it even reads DVD's)
any help appreciated.. thanks.

thanks..
i thought i put my model # in my info, it's a MB061LL/B (Apple MacBook "Core 2 Duo" 2.0 13") darn... i keep getting stuck when i think i have a solution. so copying the contents of the disc to a network pc will not work either. or, could i make the
USB stick bootable and copy contents using a old iMac ?
added: i might be able to borrow a MacBook w/ a working DVD player.. is it a fairly quick and painless process to create a bootable USB stick + put OS X Snow Leopard on it ? (i'm rusty when it comes to Mac..)
Message was edited by: roeiboot

Copy music from iTunes to USB Memory Stick

I am doing what I am supposed to do:
I highlight the songs I want to copy in iTunes.
I drag them to a fold in the USB Memory stick.
Every once in a while I get this error:
The item “name of song.mp3” can’t be replaced because it’s invisible.
I am dragging 100 songs at a time. This happens about 1/3 of the time. I then delete this "invisible" file. Sometimes, when I go back to the iTunes song, I can drag it from iTunes to the momory stick. Other times, I have to go to the file and drag it to the memory stick.
I have a 32 GB USB memory stick that I am loading up to play in my car radio. Doing this 100 songs at a time is taking me days....
I am on OS 10.6.8. I do have the OS setup so that I can see the invisible files.
It looks like, when I drag the music in, grayed out icons appear until the files copy. Sometimes those icons apparently appear as invisible files.
The USB is formatted as MS-DOS (FAT) which is the way it arrived. I suspect that these memory sticks have to be formatted that way for the radio to read the files, but I have not tried the Mac format.

After you copy the files to the flash drive...
Open Terminal (in Applications/Utilities)
Enter: dot_clean
spacebar
drag the flashdrive from the Desktop to the Termnal window
press enter
(From Tony T1 below)
-> https://discussions.apple.com/message/23930251#23930251
Here is bit of an explanation of the ._ files. (which are the hidden files)
-> http://apple.stackexchange.com/questions/14980/why-are-dot-underscore-files-crea ted-and-how-can-i-avoid-them/14981#14981

When i download my pictures to a usb memory stick in jpeg format other computers cannot open them can someone help me to sort this please thanks from a new iMac user

when i download my pictures (in jpeg format) to a usb memory stick they cannot be opened on another computer ie not a mac, do i need to convert the file so that other computers can read it thanks Sam

Sam,
Format your stick with MS-DOS (FAT32) format. I use camera CF cards as memory stick and a good practice is to regularly format them: it deals with defragmentation effectively.
JPG is a standard, regardless of which application writes it and is readable by all applications supporting JPG.
Make sure you properly eject your usb stick when you take the it out of the usb port: it makes sure the OS closes all open files.

Copying from a USB memory stick

Now i can access my iPhoto App (thanks to T. Devlin), I'm trying to import photos saved on a memory stick. When i try to import them, after about 10 seconds a message comes up saying; "The application iPhoto quit unexpectedly, click to relaunch.....", another message pops up; Saying; "Do you want to reset application settings for iPhoto, the application quit unexpectedly after it was relaunched. Resetting application settings may fix problem". When i click reset and launch iPhoto's goes blank. Yet i have put saved camcorder movies on iPhoto from same memory stick with no problems.

When i click reset and launch iPhoto's goes blank.
1. Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' and point it at your iPhoto Library Folder - by default that's in your Pictures Folder. If iPhoto sees a valid library there it will open it.
Otherwise:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Is there a problem with USB Memory Sticks and OSX?

This may not be the correct forum for this question but I don't know where else to ask!
I am having problems with a 64GB USB Memory Stick. Acrobat Reader can't read a pdf file on the memory stick but no problem from the hard drive. Acrobat Reader won't work from the memory stick. Music files (aif) won't play from the memory stick.
The memory stick came formatted for MS-DOS but I re-formatted it to MAC-OS Extended. I can write files to it but they don't seem to work from there. Is there some incompatability with OSX that I am not aware of? I would welcome some advice.

MAke sure the drive is inserted and mounted, then launch Terminal from /Applications/Utilities. Type:
mount
and hit Enter.
One of the lines returned will contain the words, "/Volumes/<name of your flash drive>". Copy that whole line and paste it here so we can see what's up.

Can't print pdf files from my imac

can't print pdf files from my imac.

macs don't come with acrobat reader by default
when one get a mac and open a pdf file the build in program called preview opens it
most of us stick with preview because acrobat reader is a rather dangerous program to install
http://www.cvedetails.com/vulnerability-list/vendor_id-53/product_id-497/cvsssco remin-6/cvssscoremax-6.99/Adobe-Acrobat-Reader.html
more
https://www.google.com/search?sourceid=opera-portal&q=acrobat+reader+exploits&cl ient=opera-portal&channel=portal#hl=en&client=opera-portal&hs=lqn&channel=portal &sclient=psy-ab&q=list+of+acrobat+reader+exploits&oq=list+of+acrobat+reader+expl oits&gs_l=serp.3...8463.9471.0.9773.8.7.0.0.0.1.162.508.6j1.7.0.les%3B..0.0...1c .1.5.psy-ab.4Tc73RiiXXA&pbx=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.&bvm=bv.43148975,d .bGE&fp=cab576d3b9062d9c&biw=1825&bih=748
after adobe flash and oracle Java the adobe acrobat reader is the most open door for hackers into ones system
if you type preview in spotlight(the icon which looks like a spyglass) or in the launch's seach you can get to the preview app

Usb memory sticks

Hi I have several 2 GB usb memory sticks. I use them to carry Keynote/Powerpoint presentations to different venues as backup. Recently I have noticed when transferring files from my new iMac that I keep getting the message that the memory is full on the memory stick despite moving lots of old presentations to trash. I don't understand this as it works with my iBook and my work windows laptop. It's a mystery. Can anybody shed any light on this?
Thanks Tim

Hi there
I am having problems with my memory stick and my SD cards out of my camera! I have an IMAC leopard and i have done what you and susan above has recommended i have deleted out of trash when device is in but it looks as if its working and then i go to put pictures back on the SD card for my digital frame and it says theres not enough room when there is sufficient room. Its also not burning discs that must be part of the problem as well.
Can you help???
Carrie Norquoy

Auto Start Up when installing a usb memory stick into a usb port on the computer

Whenever I install a usb memory stick into my computer the Photoshop Album Starter Edition program begins running. How do I stop this from happening?
Phil Walden
[email protected]

Phil,
I am not running the Starter Edition, but actually another version. However, since no one else has responded I will post what I think will work for the Starter Edition.
Look in your System Tray at the bottom right of your monitor. You should see a Camera icon that when you move near it will say Adobe Photo Downloader. Right click on the camera icon and you will probably have a choice of Disable - click on it.
Barb O

IPhoto won't import from Sony memory stick reader...

I have successfully imported from Lexar firewire cf reader, but when I plugged in my USB memory stick reader - iphoto doesn't respond. I do see "MSAC-US1" in the hardware overview of system profiler - which is the reader. When i put in a full memory stick, the reader lights as if it is talking with the computer - but the stick doesn't mount on the desktop, iphoto ignores it completely, as does disk utility.
I just upgraded to the latest version of iphoto and am using a new intel iMac.
Any help would be appreciated!
Thanks,
Eric
intel iMac, ibook Mac OS X (10.4.5) iphoto 6.02

I have the same problem. MSAC-US1, always worked before with iPhoto; I upgraded to a MacBook Pro, and now it doesn't work. The Access light momentarily lights up on the MSAC-US1, but the stick doesn't mount on the desktop. The device does show up in System Profiler, just as you noted.
It looks like the Intel version of the OS doesn't have support for this device - which is a huge problem, especially since it is listed as a device on the iPhoto Supported Devices page.
Apple, are you monitoring this discussion? Time to fix this bug!

Problems using USB memory sticks

Whenever i connect a memory stick with my macbook and try to delete a file off it, the file is moved to trash which is all well and good. But when i go to put anything back on it a message pops up saying that the memory is full.
Both times when i've encountered this problem i'd filled the memory stick with pictures and moved them onto a microsoft computer. Then i connected the memory stick back with my macbook and deleted all the photos from the stick by moving them to the trash can. When i go to put another load of pictures on it says its full. But there are no files on the stick!
Both times the USB memory stick can't be used, i've tried looking for any files on the microsoft computer but that can't find any or save anything to it.
Does anyone know anyway i can stop this problem and somehow get the memory stick to work again?

Hi
Try reformatting your memory stick using Applications/Utilities/Disk Utility. If you want to move files between OS X and Windows then you'll need to select FAT 32 format.
You may find you need to reformat the stick each time you copy a batch of photos from one machine to another.
Bob

Size restrictions for USB memory sticks?

Hi out there,
are there any known size restrictions for the use of USB memory sticks with Mac OS X?
I bought two 32 GByte (noname) USB memory sticks to "mobilize" my iTunes-library. I formatted it without errors (believing what the DiskUtility-application told me) and copied my files to one stick. But only about 4 GByte of data where able to be opened after copying. The other files where shown in the directories with their correct sizes (I compared them to the originals on my harddisk) but couldn'd be opened.
I tried copying them a second time, using the second 32 GByte stick - but same behaviour as on stick one.
Next I tried to format both sticks with the DiskUtility using the option "writing zeros in seven runs" and then tested data integrity with the TechTool-Pro application (surface test, random read and write). Both showed no errors on the sticks. But copying my library again to the sticks showed no diffrent behaviour as before. The first few copied GByte (I think about 4 GByte) could be opened by iTunes, but the rest "is only there".
Any idea what's going wrong?
Greeting from Germany
Ansgar

Hello Ansgar,
sounds like one of those faked 32GB Sticks.
http://www.digitv-forum.co.uk/viewtopic.php?t=3680

Printing PDF's from USB memory stick on HP C7180

Similar Messages

Maybe you are looking for