Printing photos with MG3520 4X6 borderless is impossible! How is it done?

I recently purchased this printer and am having problems printing a 4X6 photo borderless and getting the full photo. Am only getting about a 2X2 1/2" photo instead. Keep checking my settings to see that I have 4X6 borderless designated in my preference, and I do - but continue to only receive a small photo centered on the paper.

Hi dpol,
What program you trying to print the 4x6 image from?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

Tips for printing photos with HP ePrint

Hello,
I will be giving you guys a couple of tips on how to print photos with HP ePrint. These are general tips to make it a little more easier to use HP ePrint.
#1: Have 4" x 6" photo paper preloaded in your printer
The first step in getting quality photo prints with HP ePrint is having 4" x 6" HP Photo Paper preloaded in your printer’s dedicated photo paper tray. If your HP ePrint-enabled printer doesn’t have a separate photo paper tray, just make sure that photo paper is the only paper loaded in the tray when printing photos.
All photos e-mailed with HP ePrint will print at a default size of 4" x 6".
If available, your photos will automatically print on paper from your printer’s dedicated photo paper tray.
If you don’t have photo paper loaded into your photo paper tray, this message will appear on the printer’s display: “Load paper into photo tray”.
If you have 5" x 7" paper loaded into the tray, it will still print a 4" x 6" photo on the paper, leaving a white border along the top and the side.
HP ePrint will ensure your image is printed with the correct orientation so your photo won’t be cut off.
#2: Make sure your photos have a high enough dpi
Check your image’s dpi: Right-click on your image on your PC’s desktop, then selectProperties, and the Details tab.
The second thing to remember when printing photos with HP ePrint is to make sure your digital images have a high enough resolution, or dpi (dots per inch).
Image files (like jpeg, bmp, tiff, etc.) need to be at least 100 dpi in order to print via HP ePrint.
If you send a photo that is less than 100 dpi, it will not be printed. Instead, you will see a message in your job history on the ePrintCenter that says “Failed”.
To print a photo or image that is less than 100 dpi, insert the image file into a Word document before e-mailing. Your image will be printed on paper from the main printer paper tray.
Image attachments must be less than 5MB (megabytes). Also, HP ePrint supports a maximum of 10 attachments to a single e-mail. E-mails that exceed these limits will not print.
Find out how megapixels affect the resolution and quality of your digital photos.
If you guys have anymore questions let me know.
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!
This question was solved.
View Solution.

I hope this is helpful!
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!

Print photos with date stamp on them with a HP 6600

Does anyone know if the HP6600 printer is capable of printing photos with the date stamp on them?

Hello @Joseph_TX ,
Welcome to the HP forums.
I understand that you want to know if a way to configure the HP ePrint.
I would like to help.
Unfortunately there is no way to reconfigure the ePrint.
When you send an email to the printers ePrint address, it will print the body of the email and any attachments.
It will not print the subject line or who the email is from.
Also the ePrint feature will not resize pictures sent.
What you send is what you get.
You can get more control over ePrint with the ePrint app, but I don't believe that will suit your needs.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

HT4623 I would like to swap my primary email with my rescue email address. How is this done?

I would like to swap my primary email with my rescue email address. How is this done?

See:
* Restore Control: https://addons.mozilla.org/firefox/addon/restore-control/
* Load Tabs Progressively: https://addons.mozilla.org/firefox/addon/load-tabs-progressively/
* Reload Tabs Progressively: https://addons.mozilla.org/firefox/addon/reload-tabs-progressively/
* BarTab: https://addons.mozilla.org/firefox/addon/bartab/

Printing photos with captions

In a photo album I've put a caption into the Description box of each picture. I haven't been able to figure out how to print the photos with the caption beneath each picture. I can make a web page with the text in the Description box beneath each picture so surely there is a way to do it with printing. My goal is to print the sheets of a simple photo album -- two 4x6 pictures per sheet with the Description text below each picture. Can you help?

If you want the captions beneath the photo then use the Contact Sheet theme in the Customize section of the print window. In the Settings page you can check the Comments box to have the comments printed under each photo.
Click to view full size
You'll have the option as to how many columns to have per page which determine how many photos will be per page.
Click to view full size
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

C410a PhotoSmart Printer All Of A Sudden Prints Photos With Reddish Hue

Have not been able to get a definitive solution for this problem. Print cartridges are new and full, print heads aligned and clean. Test printouts are perfect. All non-photo related color printing is great. Only photos are printing with a soft reddish hue to them. Photos printed in normal settings on normal everyday copy paper look pretty close to the monitor, but everything goes reddish when using photo settings "best" or "maximum dpi" on the 4x6 glossy photo paper or the 8.5x11 matte finish paper.
This must be the mystery of the ages because I have never seen any solutions offered beyond the usual cartridge tool management stuff. This is definitely something else that may have changed with the W7 upgrade or Nero upgrade.

I've heard of people having a similar type of problem when printing photos from Photoshop, and in both cases it ended up being a problem with their Photoshop settings, and not the printer itself.

Using eprint to print photos with email text on one page

I have been using Presto eprint services for several years for my Dad, and I really like how it works and allows me to print the email (from, to, text in the body of the email), plus any attachments, all on one page using full letter size paper However, my parents would like to get rid of their land-line phone, so I'm looking for options to replace the Presto printer. I was thinking that HP eprint might be a good option, but based on some initial tests with a friends printer, it seems to just print photos as full page images, without the email content. Is there anyway to confirgure the HP eprint function to print the email text and photos or PDF file attachment on one page? Thanks.

Hello @Joseph_TX ,
Welcome to the HP forums.
I understand that you want to know if a way to configure the HP ePrint.
I would like to help.
Unfortunately there is no way to reconfigure the ePrint.
When you send an email to the printers ePrint address, it will print the body of the email and any attachments.
It will not print the subject line or who the email is from.
Also the ePrint feature will not resize pictures sent.
What you send is what you get.
You can get more control over ePrint with the ePrint app, but I don't believe that will suit your needs.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How do I print photos with mats or borders in 9.5.1

I have been printing photos in iPhoto for years. I have just downloaded 9.5.1 and I cannot find the option for printed mats or colored borders. Also I cannot see where you would print two photos on one page. Seems so simple. What have I missed?

You'll need a 3rd party app as that feature has been removed from iPhoto 9.5.
If you have Pages 09 or earlier the photo can be added to a Pages page, resized to the print size and a frame added.
The newer Pages version, 5.1, has a very limited frame selection but does have some borders.
Additional frames can be added to Pages 09 with this free add-on: Frames and strokes installer for : iWork ’08, iWork ’09, iWeb ’08 et iWeb ’09
OT

Printing Photos with AirPrint to Epson Px730Wd produces white edge

All,
I have just bought a new Epson PX730WD and have a small problem when printing photos via AirPrint. I always get a 3mm white edge on the right hand side of my photos. Printing the same photo from Epson iPrint app works fine and it works from my PC as well, but using AirPrint via the native photo app always produces this white edge. Very annoying as I prefer to use the native functions when available, but cannot be doing with this edge.
Any ideas?
Thanks
Chris

I have contacted Epson Support and they told me to try the iPrint app which I did and it worked fine. So the problem seems to lie somewhere between airprint and the printer recognising what is being sent via airprint. I can't find an Epson forum where these type of issues are discussed. I was hoping someone else may have an tried airprint with a PX730wd to see what results they get.

Printing photos with Color Laserjet CM1312. Need proper printing software.

I'm trying to print photos from my Color Laserjet CM1312 multi-function printer.
I used to have a Photosmart inkjet, and tried to use the photo-printing softthat came with that printer, as I really like it. But that must have been designed just for ink-jet printers because the printouts end up way too heavy on ink density, to the point that some of the ink is actually scraped off during the printing.
What software should I be using for the color laserjet?
I don't need editing tools as I have Photoshop ... just printing tools.

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

Printing photos with titles/burning photos with titles to CD

I have taken photos that show hand positions for particular physical treatments and wish to print them with their titles so that I can remember what is what when I look at the photos in my notebook. Likewise, I would like to burn the photos WITH THEIR TITLES to CD so that I can share them with my classmates and have the photos make sense. Is there anyway to do this with iPhoto?

Janel
Burning with Titles is easy: File -> Export. In the resulting dialogue choose Use Title under the Name panel. Export the files to a folder on the desktop, then burn that folder. This is certainly the case with v6, it may also work with 5.
Captions are more difficult. You cannot add text to a Pic using iPhoto, but you could create a document in Pages and very easily add captions to the Photographs there. Setting other apps as external editor would allow using PS or PE to add text to the pics.
Regards
TD

HP psc 1210 all in one printer - Printing photos with Green Hue

Hey folks,
it used to work fine, now for no apparent reason, it is printing out photos with a strong green hue. They all come out looking very green and yellow.
I have done several things - i have downloaded and updated all printer software and drivers, i have ran all printer calibrations and cleaning programs, i have accessed Macbook utilities folder and ran all colorsync utility's such as repair and adjust hue. What is going on here? I am completely stumped with this one.
Thanks,
Steve.

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why doesn't G510n print photos with premium photo paper

I just received the G510n Wireless for Christmas. I tried printing a Photo on Premium Photo Paper and it does not come out. I can't find Photo Ink for this printer. Doesn't this printer have the capability to print Photos on Photo Paper?
This question was solved.
View Solution.

HI Dawn3905,
Yes your printer does have the capability to print photos on photo paper.
I'm not sure what operating system you are using but here is a link that shows how to print using photo paper in Mac OS 10.5 or later.
Also here is a link to your printers manual with instructions on how to print photos in windows as well.
Hope this is helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Printing photos with MG3520 4X6 borderless is impossible! How is it done?

Similar Messages

Maybe you are looking for