Printing pics to a Samsung CLX-6200

I just bought a new Samsung CLX-6200 laser color, multifunction printer. It has a multi purpose tray which I load with 4x6 photo paper. I am not able to figure out in Snow Leopard how to change the paper size and select this tray. Can anyone help please?
Thanks!

InspGadget wrote:
I am not able to figure out in Snow Leopard how to change the paper size and select this tray.
In the Print Dialog, you can select the appropriate paper using the Paper Size menu underneath Copies and the page range fields. If you do not see this menu, and you have expanded the dialog box using the disclosure triangle to the right of the printer's name, what application are you using? To select the tray, select the Paper Feed panel in the menu that has the application's name.
Hope this helps.

Similar Messages

I'm trying to get my new airport extreme to print wirelessly to my samsung clx usb printer and not having any luck. I downloaded the bonjour print wizard and I know there's a signal going to the printer, but it still will not print? Any ideas?

I'm trying to wirelessly print to my samsung printer. I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print. Anyone have any ideas?

You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.

How to print double sided with macbook pro on Samsung CLX-3180?

Hi,
I recently switched to using a macbook pro but cannot figure out how to print double sided/two-sided.
The printer I am using is Samsung CLX-3180 and it allows double-sided printing. I was able to do this with my windows computer previously.
The frustrating thing is that I see the two-sided feature but I cannot figure out how to turn it on. There is no option to change it.
It is listed here.
First, I go to "show presets."
Then, I click on "copies & pages" but I cannot turn it on.
Does anyone know how to turn it on?
Any suggestions would be highly appreciated.
Thanks.

Hi nat.the.musical,
If you are having issues selecting two-sided printing from the Print window, you may find the following article helpful (it is aimed at Mountain Lion, but should also apply to Mavericks):
OS X Mountain Lion: If your printer has features that aren’t in the Print dialog
http://support.apple.com/kb/PH11477
Regards,
- Brenden

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

Read the printer manual.

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

Hi Paolo,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?

My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly. I could with my netgear but not with my airport extreme, any ideas?
I have restarted all units, disconnected and reconnected

Hi ryanfromstockbridge,
I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Printing troubleshooting
Troubleshooting printer issues in OS X - Apple Support
OS X Yosemite: Add or remove a printer
Sincerely,
- Brenden

Error Adding Printer Samsung CLX-3180 Series OSX 10.9

MacBook Pro Retinta Display OS X 10.9.4 8 G RAM; 2 GHz Intel Core
I am having troubling adding a printer to my recently purchased Macbook
I downloaded the drivers from the Samsung website for the CLX-3180 Series, the software installs (at least it says it did).
I then go to add printer under printers/scanners and select Samsung CLX-3180 Series from the window. Messages indicate that the software was downloaded and updated and then I get the message "An error occurred while trying to add the selected device; Unable to find an appropriate software on your system after running software update."
I then reset the printer system, update the system software, restarted the laptop and tried again; still get the same error message.
No clue what to do next.

OS X Mavericks: Reset the printing system

Samsung CLX-3175 printer (not wireless) compatability with

I have a Samsung CLX-3175 printer (not wireless)Am i right in understanding that if i connect an airport extreme to it, that it will become a wireless printer? any issues i should know about this before buying an air port? thanks all

You might want to check with Samsung support to verify if your model will work at the USB port of the AirPort Extreme. If it does, then you will be able to print from your computer using the wireless connection.
There is a good chance that the printer will work because it does appear on Apple's list of compatible models:
http://support.apple.com/kb/HT3669#HP
Important Note......If your printer is an All-in-One type device, only the print function will work when the printer is connected to the AriPort Extreme. Copy, Scan, Maintenance, etc will not be supported. You will need to connect the All-in-One directly to your computer for those features to be available.
If you are asking about printing from an iPad, even if your printer is supported, you will likely not be able to print from the iPad unless you install an App like Print Central on the iPad.
PrintCentral for iPad on the iTunes App Store

Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server.

This is the the alert I keep getting when i try to add this new printer
"Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server."
Im am having BIG problems getting my printer to be recognized

water bar wrote:
I am getting the identical error message for an HP Officejet 7200 series printer.
First there is a message that software is available from Apple. You click to get it. Then it tells you that it is not currently available from the software update server.
I am running OS 10.8.2. Printer is on my home network (not USB).
I went to the Apple Software Dowload site and re-downloaded the latest "HewlettPackard Printer Drivers" (v.2.12) and installed them (twice). No dice.
Anybody found a way around this problem?
I solved all print related issues by avoiding HP, worst software I ever saw, this may not work for you though.

Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?

Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly. Is there a new driver for this ? I had a long chat with Samusng help desk that was totally inconclusive. Trying to re-install the printer I was told that there is no driver currently available. HELP !

You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X

Scanning no longer works with Mavericks (Samsung CLX-6220FX)

With Mountain Lion I had no problem with the printer. In 10.8 I installed it by going to Printers & Scanners, clicking the plus sign and then clicking Samsung CLX-6220 Series. Then Apple software update would install the required driver automatically and printing and scanning would just work.
In Mavericks when I click on my printer under the popup that clicking the plus sign opens up, I get the following message:
Clicking "Use Generic" works, but only with printing. Clicking "Open Scanner..." gives me the following:
I've tried installing the drivers from Samsung's official web site (Samsung_CLX-6220_Series_PrinterDriver.zip and Samsung_CLX-6220_Series_MACScanner.zip). But then printing would not work, only scanning.
Any help would be greatly appreciated!

Hey there Jacob,
It sounds like your printer is not functioning correctly after having updated to Mavericks. I was researching what is happening and found this article to help troubleshoot what is going on named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Regards,
Sterling

How-To: Setup up the Samsung CLX-3160

The Samsung CLX-3160 is a color workgroup printer that has the ability to scan, fax, copy, and print. It is a pretty good printer, but the drivers provided for the printer really are just designed to be used when connected to USB. Well thats just WONDERFUL for a printer that is designed to be used over the network right? So as opposed to complaining, lets solve the problem for any of you that needs this for the future.
1) Open the CUPS web app on your machine (yeah surprised me to)
http://localhost:631
2) Click on the Administration Tab
3) Click on Find New Printers so that the CUPS server will be able to find your printer over the network. If it find it, skip to the test page stuff
4) More than likely it didn't find your printer so click on Add New Printer. Enter a Name, Location and Description for this printer. Doesn't matter what you pick really so long as you follow the comments and don't use forbidden characters. Click on Continue.
5) On the next screen it will ask you for the Device (which is really asking for the protocol) and you want to select the IPP (Internet Printing Protocol). Don't select the Http version!
6) The next screen is asking for your Device URI. To get this, go to the Printer and on the Menu go to the Network Settings.
Menu Button > Network > Network Info > Print > Yes
A page will then print on the printer containing the details you need
On this page there will be a Printer URI (i.e. http://10.0.1.4:631), enter this into the Device URI box and press continue.
For the Make select Samsung, Press continue.
On the Model select CLS-3160 Series and press Add Printer.
The next screen lists the default printer options. Select whatever options you want and then press any of the Set Printer Options buttons.
You will now see the printer setup in the browser. If you go over to the Printer dialog in System Preferences you will see the printer there as well. Before you leave this screen though, press the Print Test Page button.
Give it a few seconds to print.
You're done. Enjoy!

Finally!!!! Someone that could fix my problem. I called Microsoft, Apple, and Samsung, and none of them could figure out why Print Preview would not work or why my Samsung CLX-3160 would print blanks.
I upgraded to Mac Office 2008 expecting that Leopard did not work well with 2004 Office. The problem remained. I was just about ready to backup everything and spend the day doing a full clean install of everything. Then I found your thread.
After HOURS trying other solutions and listening to each company blame the other, your solution fixed me up. A million thanks.

Fail to print via time capsule (samsung scx-4200)

Hi, i have trouble with print issue..
I have 2 mac os devices:
mac pro with 10.6.7 - conected via ethernet to time capsule
and macbook air with 10.6.7 - conected via wifi to time capsule
and one non mac (acer notebook with ubuntu linux) conected via wifi to time capsule
I buy new printer Samsung SCX-4200 and connect it to time capsule - try to print from Mac Pro - its easy started and good worked..
try to add printer to ubuntu - all nice, printer found, test page work good..
and go to macbook air and try to add printer. Printer adds normally but when i try to print i receive 'nothing' and printer Paused.. But when i put scx-4200 directly to my macbook air via usb - it print and scan normally without any problems.
In both variants with mac os i install drivers for print for mac from samsung.com site directly.
Please help to resolve this issue, no possible to insert usb to macbookair any time when i need to print something.
in /var/log/cups/* i have next messages by tail -f /var/log/cups/* and open textedit and type some text + CTRL+P end press enter ->
localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 1312 Create-Job successful-ok
localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 12353 Send-Document successful-ok
localhost - - [30/May/2011:20:37:12 +0300] "POST / HTTP/1.1" 200 310 Set-Job-Attributes successful-ok
==> page_log <==
Samsung-4200 9 l33t [30/May/2011:20:37:12 +0300] 1 1 - localhost Untitled A4 -
==> error_log <==
E [30/May/2011:20:37:12 +0300] [Job 9] Unable to read response header - short read
E [30/May/2011:20:37:12 +0300] [Job 9] Unable to open printer (read failure)!
D [30/May/2011:20:37:12 +0300] [Job 9] The following messages were recorded from 20:37:12 to 20:37:12
D [30/May/2011:20:37:12 +0300] [Job 9] Adding start banner page "none".
D [30/May/2011:20:37:12 +0300] [Job 9] Queued on "Samsung-4200" by "l33t".
D [30/May/2011:20:37:12 +0300] [Job 9] File of type application/pdf queued by "l33t".
D [30/May/2011:20:37:12 +0300] [Job 9] Setting job-hold-until to no-hold
D [30/May/2011:20:37:12 +0300] [Job 9] Adding end banner page "none".
D [30/May/2011:20:37:12 +0300] [Job 9] Job released by user.
D [30/May/2011:20:37:12 +0300] [Job 9] job-sheets=none,none
D [30/May/2011:20:37:12 +0300] [Job 9] argv[0]="Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[1]="9"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[2]="l33t"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[3]="Untitled"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[4]="1"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=TextEdit com.apple.print.JobInfo.PMJobName=Untitled com.apple.print.JobInfo.PMJobOwner=l33t com.apple.print.PageToPaperMappingMediaName=A4 com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=5462 com.apple.print.PrintSettings.PMColorSpaceModel..n.=1 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Samsung-4200 media=A4 PaperInfoIsSuggested..b. pserrorhandler-requested=standard job-uuid=urn:uuid:6c043468-8143-3740-4f5f-c1b8f2958f3b job-originating-host-name=localhost time-at-creation=1306777032 time-at-processing=1306777032 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=A4"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[6]="/private/var/spool/cups/d00009-001"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[0]="<CFProcessPath>"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[9]="HOME=/private/var/spool/cups/tmp"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[11]="[email protected]"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[12]="SOFTWARE=CUPS/1.4.6"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[14]="USER=root"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[17]="IPP_PORT=631"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[18]="CHARSET=utf-8"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[19]="LANG=en_US.UTF-8"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[20]="APPLE_LANGUAGE=en-US"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[21]="PPD=/private/etc/cups/ppd/Samsung-4200.ppd"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[22]="RIP_MAX_CACHE=8m"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[23]="CONTENT_TYPE=application/pdf"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[24]="DEVICE_URI=dnssd://Samsung%20SCX-4200%20Series._riousbprint._tcp.loca l."
D [30/May/2011:20:37:12 +0300] [Job 9] envp[25]="PRINTER_INFO=Samsung-scx4200"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[26]="PRINTER_LOCATION=printer123"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[27]="PRINTER=Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[28]="CUPS_FILETYPE=document"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 1759)
D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /Library/Printers/Samsung/SCX-4200/rastertosec (PID 1760)
D [30/May/2011:20:37:12 +0300] [Job 9] Started backend /usr/libexec/cups/backend/dnssd (PID 1761)
D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series._riousbprint._tcp.local."...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series", regtype="_riousbprint._tcp", domain="local."...
D [30/May/2011:20:37:12 +0300] [Job 9] Looking for printer...
D [30/May/2011:20:37:12 +0300] [Job 9] `/private/var/spool/cups/d00009-001' has 1 pages.
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/Samsung-4200.ppd"...
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: size->width = 595, size->length = 842, size->top = 829.5, size->bottom = 12.5, size->left = 12.5, size->right = 582.5
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: PreferredRotation = -90
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
D [30/May/2011:20:37:12 +0300] [Job 9] skipBytesPerRow = 2
D [30/May/2011:20:37:12 +0300] [Job 9] band width = 4750, bytesPerRow = 4752, band height = 2206, height = 6808
D [30/May/2011:20:37:12 +0300] [Job 9] context width = 4750, height = 2206, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 4752, bitmapInfo = 0, resolution = (600.000000, 600.000000)
D [30/May/2011:20:37:12 +0300] [Job 9] NOT using display list
D [30/May/2011:20:37:12 +0300] [Job 9] PAGE: 1 1
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 0% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 7% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 14% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 22% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 29% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 36% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 44% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 51% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 58% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 66% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 73% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 80% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 88% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 95% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: bytes written for sheet 1 = 32338000
D [30/May/2011:20:37:12 +0300] [Job 9] Ready to print.
D [30/May/2011:20:37:12 +0300] [Job 9] Resolved as "riousbprint://Time-Capsule-d99f2b.local.:10000/Samsung%20SCX-4200%20Series%208 T66BACPB13615P."...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: -connecting-to-device,offline-report
D [30/May/2011:20:37:12 +0300] [Job 9] Executing backend "/usr/libexec/cups/backend/riousbprint"...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
D [30/May/2011:20:37:12 +0300] [Job 9] Looking up "Time-Capsule-d99f2b.local."...
D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to Time-Capsule-d99f2b.local.:10000
D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to printer...
D [30/May/2011:20:37:12 +0300] [Job 9] Connected to 0.0.0.6:10000 (IPv4)...
D [30/May/2011:20:37:12 +0300] [Job 9] Set job-printer-state-message to "Unable to read response header - short read", current level=ERROR
D [30/May/2011:20:37:12 +0300] [Job 9] Backend returned status 1 (failed)
D [30/May/2011:20:37:12 +0300] [Job 9] Printer stopped due to backend errors; please consult the error_log file for details.
D [30/May/2011:20:37:12 +0300] [Job 9] End of messages
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state=5(stopped)
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-message="Unable to open printer (read failure)!"
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-reasons=paused

Do a google around for that printer and airport usb.. (since airport is more common).
eg. https://discussions.apple.com/thread/1785847?start=0&tstart=0
Not all printers work or work well through usb print server.. often the drivers are just not written for remote usb connection. Or the printer is GDI type and actually needs direct connection to process the job.
Proper network inkjet printers are cheap.. keep the Canon connected to a computer if you want.. and get a wireless or ethernet network printer.. do not use the USB.. use the printers own internal print server.. and these days make sure it does airprint if you want to use iOS devices.
Remember the printer is cheap.. the companies make all their money on blades ink cartridges. Which they now add chips to, to prevent you cheating and buying OEM types.

Can't print pics in iphoto 08

This might have something to do with recent Mac software updates but I can no longer print pics in '08. I get the message "No available themes" "until at least one theme has been installed this feature (printing) is not available" How did this happen? How can I reload the themes that must have been there in the past?

Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD

Can't print pics

Greetings,
We have a HP C6200 all in one printer and from day one I have had to go thru special steps that I basically learned thru trial and error to get it to print pictures from my computer.
I had a problem with it once before where it wouldn't print pics no matter what I did but finally after a few days of playing around with it, I got it to start working again.
It stopped printing pics from my computer again and I have been working on it for weeks. I cannot get it to work and have run out of ideas. The Basic Guide is no help at all. If anyone has suggestions I would be grateful. I load all our pics on my computer. Thanks. Cindi

I have Windows Vista. When I want to print a picture in the past I have just gone to my pic folder and it opens up the hp photo and I print. I don't get a message but on the printer it has always said to insert my Memory Card.
I haven't had to do that before but have had to go to great lengths thru trial and error to get it to print the pics.
I tried to put my memory card into the printer tonight but my memory card would not fit in the memory card slot.
I would appreciate any suggestions you have.
Thanks,
Cindi

Printing pics to a Samsung CLX-6200

Similar Messages

Maybe you are looking for