Printing picture but not words

Trying to print a recipe from online.  When I click print preview the recipe is there, but when I click' print' it only prints the picture but not the text.  When printer turned on it had that message of "incompatible cartridge" but that finally when away, then it was stuck on printing the alignment page continually.  It then started printing facebook pages in quene(?).I deleted all those from quene, then only had recipe.  At first paper would go through and print a line, finally it printed the picture, but never could get the text.  Any ideas for a not too teckie person?

and besides the audio getting to the camcorder,
the screen does go black (instead of blue), just
no video image.
i've followed the same procedure for the last 5 years using Final Cut Pro:
- selecting the sequence on the Browser
- selecting mini dvd firewire (instead of 'none')
on the drop down for Audio/Video quick setup.
- and i've selected using same destination for 'print to video' as the source of video
the pref's show Final Cut knows i'm using the DVX
instead of another camera.

Similar Messages

  • Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

    Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

    Review my post here:
    http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
    And see if something similar will work for you.

  • HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

    Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

    You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
    You might try a 3.5mm to RCA adapter
    from the Mac Mini's headphone jack to the TV's audio input,
    but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
    Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event and the number of pictures.

    Hello,
    I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
    The albums with the same pictures into them are visible.
    Thanks for your help,
    Raf

    Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
    Click to view image full size
    OT

  • I download a movie from iTunes in to my laptop and when I try to watch it on my tv, I have picture but not sound.???

    I download a movie from iTunes in to my laptop and when I try to watch it on my tv, I have picture but not sound, Im using an hdmi... helpppp...
    thanks..
    manugold

    Just sync your iPad.

  • Trying to transfer pictures from device to BB desktop pictures but not connecting.

    hi
    Trying to transfer pictures from device to BB desktop pictures but not connecting.
    seems i was able to back up.
    downloaded new software to desktop while BB was connected vis USA to computer.
    Solved!
    Go to Solution.

    Well the new Desktop Manager can ONLY sync up with a Media Card. You would need to download Desktop Manager 4 with Roxio Media Manager to access the device memory.
    - Please Thank the person that helped you by giving them Kudos. Click the Kudos Button (beside the Reply Button) at the bottom of the post which helped you.
    - Please resolve your thread by marking the post "Solution?" which solved it for you!

  • HT201343 I have a picture but not audio?

    I have a picture but not audio?

    Hey firecastle123,
    Thanks for the question. Let’s check your output device for sound:
    OS X Mountain Lion: Change your computer’s sound output device
    http://support.apple.com/kb/PH11235
    Thanks,
    Matt M.

  • Printer installed but not responding to print jobs

    I'm not quite sure how to intelligently ask this question so let me describe what happened.
    I have a friend who asked for help in troubleshooting a problem with his printer.  His printer is a brand new HP Officejet 6600 sitting near his computer and is on his wifi network.  He can not print to it wirelessly from his iMac running Lion, but his wife can print wirelessly to it from another room on her iMac.  He can print using USB, though, but he prefers wireless because of the wiring situation in this room.  Plus, he bought for wireless printing.
    When I got there I checked his System Preferences:Print & Fax and confirmed that his printer was installed and had the green idle light showing ready for a print job.  I tried to print and everything looked normal and showed that the job was sent to the printer and was 100% completed but the printer never responded.  I tried it from his wife's computer and confirmed that she was able to print a page with no problem.  I brought my MBP and joined his wifi network and added his printer and was also able to print.
    So, I tried some basic troubleshooting steps trying to print after each one, and nothing worked.  I deleted and re-installed his printer, repaired permissions, restarted in Safe Boot, tried printing in a second user account, Reset printing system..., deleted all com.apple.print... preferences,  installed Onyx and ran the System Cleaning routines,  powered down/up the router/computer/printer, reset the wifi on the printer and rejoined his network, and probably a few other things I can't remember right now.
    After doing all of this and throwing up my hands I tried to print again from my MBP to prove that I still could, and this time was not able to print.  It kept trying to send the job but the printer never responded.  His wife's iMac was still able to print, however.  This got me frustrated and I decided to ask this forum for help.
    Oh, and here's some more information.  His wife has a printer next to her computer, an HP Officejet something (I forget, not 6600, though).  His iMac is able to print over wifi to this printer with no problem.  What the...?
    What other things can I try? Does this point to something in the printer such as a bad wifi card, or something?  Any suggestions or ideas will be much appreciated.
    Thanks

    LilyLC, hold on to your chair you will not believe what happened today.  Bear with me while I give you all the details but you will want to read the entire story.
    First, to answer your question in the first paragraph of that last post, his wife's printer is connected to his wifi and is using the driver installed by Apple and has been updated on the same date as his computer that I gave earlier.  She can print to her printer and so can he.  After the troubleshooting steps I have taken and took today I agree with your assessment about an intermittent issue with the printer, too, but let me tell you what I did today.
    Before going to his house I decided to set up a second wifi LAN at his house using my router to check if his Airport Extreme (I incorrectly thought initially it was an Airport Express) router was the problem.  The thinking being that I have checked his printer and computer and nothing I have tried is making a difference, so the only thing left is his router.  So, I set up my router and joined his computer, printer, and my MBP, to the wifi and tried to print from both computers.  The printer still was NOT working!  That was a big disappointment since I just knew that was going to work.  I guess that eliminates the router.  I reconfigured his computer back to his wifi and proceeded to the next step.
    I hadn't installed the drivers from the website you gave me earlier since I saw in Software Updates that he had updated to that same driver set already.  Now I got to thinking that maybe those files were corrupted somehow so I downloaded the drivers from the website you gave me and installed.  Deleted drivers from Print & Scan pane and installed the newly downloaded driver, tried to print, and that failed, too.
    Next I tried your suggestion of using the LPD protocol instead of the HP JetDirect and that setup failed for some reason.  I reconfigured using the HP JetDirect, and that worked for printing, as before, but the scan function was not available, as before.
    I was getting a little pressed for time today and had time to try one more thing, so I decided to forgo the new Location setup until tomorrow and instead chose to plug his printer directly into the Airport Extreme via USB and see what happened.  I deleted the IP driver and clicked the + to add the installed driver and was presented with an HP Officejet 6600 on the top line and lower down under "Nearby Printers" found an HP Officejet 6600 series [XXXXXX] and under that HP Officejet 6600 Fax.
    I chose the first driver and installed and tried to print and was successful.  However, the scan function was not available.  So I deleted that driver and chose the second one.  I noticed immediately that the scan function was available.  Thinking I might have something I tried to print and was unsuccessful.  Mmm...printing works with the first driver but not the second and scan works for the second but not the first.  What's with THAT? 
    This was really getting frustrating by this time and after much discussion with him I told him I thought the printer was the device at fault.  For some reason his printer just did not like his network.  I tried printing to his wife's computer and that worked great.  No problem there.  But for some reason his printer did not like his network and refused to work by setting up manually.
    I recommended that he bring the printer back and exchange it for another printer.  He agreed and immediately boxed it up and left for the store.  I returned home to more friendlier surroundings.
    Here's where it gets interesting, and it helps to know that my friend is in his mid-eighties.  About an hour later he calls and tells me he's sitting in the parking lot of Office Depot.  He tells me that when he was in the store discussing with Customer Service about an exchange it dawned on him out of the blue that he DIDN'T NEED TWO PRINTERS!!  He said that if he could print to his wife's computer today then he could print to it from now on.  I was speechless!!!  I told him I asked him at the beginning of all this why he had to have two printers, and at that time he said "trust me, we need two printers".  Ok.  He tells me he has no idea why he didn't realize that wifi worked differently than cable.  He thinks that maybe since his older two printers were each connected to his and his wife's computer these newer computers operated the same way too.  But he admits to me that he was the one who set the printers up on his wifi network, so why he didn't realize that only one printer was necessary with wifi he didn't know.  He was embarrassed.  He admitted to me that technology is very difficult for him to understand.  No kidding!!!
    I didn't need to remind him how much time had been spent on this problem because he was quick to apologize and was very sorry for taking up so much of my time, and he really appreciated the effort.  I told him I didn't mind.
    And I really didn't, because I learned so much from this experience by following your suggestions, LilyLC.  I never knew how to set up a printer using its IP address, and the protocols to use, and I never knew how to add new Locations in the Network pane and why it might be useful.  You also got me to considering other troubleshooting ideas I wouldn't have thought of otherwise.  So maybe my friend and I aren't that different after all.
    I really appreciate all the suggestions, links, and ideas you offered during this effort, LilyLC.  I wish I could have determined the cause of the problem but, not knowing the inner workings of these devices, I can only assume that it had to have been the printer.
    I bet I get a call from my friend a week from now saying that he just bought a second printer for his room because his knees can't take the walking from his room to his wife's room to get all of his printouts.  All I can say is THAT printer better work.
    Thanks again, LilyLC, for all your time and help.  It was really appreciated!

  • HP OfficeJet Pro 8600 - will print wirelessly but not scan on Windows 8.1. HP PC

    Hello,
    my HP printer and HP computer have been working perfectly but now all of a sudden I cannot scan anymore from my printer to my computer. I can print and scan the other way around and the wireless network works. I am just a regular user and don't feel sure about how to uninstall and re-install programs, so I would be very happy if you had just a simple fix
    I already tried closing down everything and unplugging the router, then plugging the router and turning everything on again but it didn't help.

    Hi @gabmus,
    Welcome to the HP Forums!
    I see that you can print but not scan wirelessly with your HP Officejet pro 8600 on Windows 8.1. I am happy to help you with your scanning issue!
    To verify the printer's hardware is working, are you able to make copies with the printer? Copying a Multipage Original.
    In the meantime, please go through the steps in this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays When Scanning for HP Officejet....
    Hope this helps, and have a great day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

    I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
    Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

    Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scanning issues.  I would like to help.
    I would recommend powering off your printer and computer.  Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in.  Once it has begun broadcasting again, power on your printer and computer.
    I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I am trying to move my  albums  with the pictures to a flash drive but I get the pictures but not in the album.

    How can I move my albums, including the title of the album , with the pictures to a flash drive. Every thing I try I only get the pictures but they are not in the album.

    Create a folder on the Desktop with the ablum name.  Then export the contents of your iPHoto album into that folder.  Drag the folder  onto the flash drive.
    OT

  • Logo Visible in Print Preview, but not in pdf and hard copy

    Hi,
    We have uploaded a logo to be shown in the footer. We are able to see the logo in the print preview, but when we print the invoice (SAP Script),  it is not seen in the hard copy. We tried by saving it as a pdf, even in the pdf, it is not displayed.
    We are on SAP 4.7
    Please help.
    Thanks in advance.
    Mick

    hi,
    Am not sure what the exact issue could be, but i am expecting there may not be sufficient space to fit the logo. I suggest you to check the output by placing the logo in header whether its coming or not in hardcopy, that may help you.
    regards
    harris

  • Communication Error with Brother MFC-620CN Printer works but not scanner

    Only printing works off the airport extreme but not scanning. Tried to mannually add the printer in the control center or device selector but printer cannot be found. Scanner worked prior to software upgrades. In addition, I get the communication error message "fails to connect to device" when I connect to the brother status monitor... All is OK when hooked up directly to Mac.
    Anybody has a hint? Would be very helpful.
    Thanks
    Marti

    Only printing works off the airport extreme but not scanning.That is exactly how it works. The AirPort Extreme base station (AEBS) only supports printing NOT scanning or any other operations.

  • Canon EOS Camera T3- took pictures, but not seeing it on viewer? Need Help to retrieve.

    Hello Everyone, 
    I am new to this forum, so I hope you can help.  I recently took pictures on my Canon EOS T3 camera.  
    Questions:
    The camera was giving me a sound as if it was taking the picture, but unfortunately, when I try to locate it on the preview viewer, I could not find it.  
    As well, I also took a few pictures, and saw them  on the viewer,but can't retrieve them on my computer. 
    I would appreciate any assitance you can provide to me. 
    I await your response, 
    Cheers, 
    nshah123

    You probably need a new SD card.  At any rate you need to try one and see if that is the problem,
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

Maybe you are looking for

  • Can't delete NASCAR or other built-in applicatio​ns

    I want to remove some apps I will never use.  Anyone figure out how to delete the built-in apps like NASCAR.  It looks like you can only delete apps you install yourself, and can't delete any of the built-in apps.  Post relates to: Pre p100eww (Sprin

  • How to run reports directly from R/3 tables

    We are about to implement BW but the client wants to run temporary reports directly off R/3 tables. How can this be accomplished? Do we just use business content or r there other ways? Thanks

  • Seeking a lightweight reclining stand(iMac vesa mount models)

    Hi, I purchased a 21.5 iMac with the Vesa mount adapter assuming it would not be that hard to find a suitable reclining/retractable stand instead of a wall mount that can easily allow the user to obviously adjust these iMacs into a 90' 60' 30' viewin

  • Wierd issue with new E3000 switch port

    Hello all. I installed a new E3000 about a week ago. I flashed the firmware to the newest version and it installed fine. I have 6 devices total on the router, 3 wireless and 3 wired.  Everything has worked more or less fine except for my one desktop

  • Event firing multiple times (et_Got_Focus)

    Hi, I just noticed while debugging my Add On code that the et_Got_Focus event which I have added to my event filters is triggered 64 times when I change a field value and then move to a different field.  This not only happens in the matrix when chang