Printing playlist sloes computer waaaaay down..

Can someone help me
I'm using a G4 400 with OS 10.4.8. Text files print no prob. Safari files print no prob. But...
When I print a playlist file in iTunes 7.02, the first 14
lines of a playlist prints then slows then comes to a complete standstill, hanging into eternity..
I'm using an HP all-in-one PSC 1210. It works great with everythinh else. Dont know whats hoig on. No=one
on th iTunes forum knows either.
Any help appreciated
Alexis

Thanks .. I tried that bu t I dont have a spreadsheet program. I tried printing the text documnt but it has tons
extra info.. The print playlist works for about 12-14 lines then the printing job hangs foever?!
/Alexis

Similar Messages

Computer slows down more each time I print a PDF. It reverts to a reasonable speed if I restart the computer. Everything worked normally until I installed Avast Virus Protection.

I have Windows XP and Adobe Reader XI. My printer is a Ricoh Aficio 240W.
My computer normally lacks internet access. I briefly connected it to the internet to install the full version of Avast Antivirus, then disconnected it from the internet again, and it has been disconnected from the internet since.
After I installed Avast the computer began acting screwy when I printed PDF files. I uninstalled Avast but the screwiness continues.
The image in the upper left corner was taken after doing one printing of a PDF file. I'm pretty confident AcroRd32.exe. is Adobe Reader. Notice that after running one print Adobe Reader is using about 50 CPU's.
The image to the right of that was taken after doing two printings of a PDF file. Notice that after running two prints there are two AcroRd32.exe processes using 50 CPU's.
The image below the other two was taken after doing three or four printings of a PDF file. Notice that after three printings one AcroRd32.exe process is using 50 CPU's and two others are using about 25. After about three printings my computer slows down dramatically, and it keeps getting slower the more prints I do.
When I restart the computer it reverts back to normal. Can anyone think of a better solution to this problem of increasing slowness than restarting the computer every two PDF prints?
My computer currently has no virus protection, although Windows Firewall is up. Someone at Avast I briefly mentioned this too thinks this should not happen and he was wondering if the computer has some sort of virus...but before I removed Avast it told nothing about viruses that I know of. I honestly do not know if anyone scanned the computer with Avast before removing Avast, but I suspect it was scanned before the removal of Avast. I suppose this could be the result of some virus...but then the computer behaves quite normally, except when I print PDFs. I'm wondering if Avast changed some settings in my printer program or Adobe programs....
I have CCleaner. Every time I analyze my computer to look for stuff to remove to speed up the computer it shows Internet Explorer history files, and sometimes Internet Explorer temporary internet files despite not being online. If I click on Internet Explorer to go onto the internet, I am told I am working offline.
Thanks. Guesses are welcomed.

Note that regarding this section:
The image in the upper left corner was taken after doing one printing of a PDF file. I'm pretty confident AcroRd32.exe. is Adobe Reader. Notice that after running one print Adobe Reader is using about 50 CPU's.
The image to the right of that was taken after doing two printings of a PDF file. Notice that after running two prints there are two AcroRd32.exe processes using 50 CPU's.
The image below the other two was taken after doing three or four printings of a PDF file. Notice that after three printings one AcroRd32.exe process is using 50 CPU's and two others are using about 25. After about three printings my computer slows down dramatically, and it keeps getting slower the more prints I do.
The layout changed when I posted. Therefore, what I mean by the image in the upper left corner is the image at the top. What I mean by the image to the right of that is the image in the middle of the other two. What I mean by the image below the other two is, of course, the image at the bottom.

A better way? Need to reinstall printer on network after shutting down computers.

HELP!
I have a HP 3310 All in one. It is oh, 4 years old or so and this has bugged me the whole time.
Basically, whenever I power down any/all of the computers on my network I lose the printer when I power back up.
My first fix was to just leave everything powered up all the time, worked great until the power went out. I talked to someone in tech support and they had me uninstall and reinstall everything. I got it up and running but I definately do not want to do that everytime I want to print something!
My second fix was to hook up directly to computer with USB cable, this was my last solution, I could only print off the computer wired to the printer though. One of the reasons I bought this printer was I wanted to be able to do so across the network, wirelessly or not.
My network now includes 3 computers and a network backup drive, a laptop (when I use it, is wireless connection) and this printer. I have a Dlink DGL-4300 router tying everything to my cable modem.
My current bout of frustration stems from recently upgrading 2 computers with some new hardware and new OS, I moved to Win7 on the 2 new rigs, and have Vista on my other desktop, the laptop runs XP but is not used very often. It does login to my network flawlessly each time I turn it on though.
I am looking for an "easy button" here. Setting up networks is something I can do, right up until I hit my first problem that a wizard cannot fix. (which seems to be any problem that pops up)
My printer shows that it is connected to my home network with excellant signal strength ( it is only about 6 feet from the router) my desktops are all connected and can see each other, I can share files off the vista computer with one of the win7 computers but not the other ( a different problem for another web forum).
My printer does not show up in my network neighborhood window and no number of reboots of printers or computers seems to get things reset so that any of the computers will "see" the printer. Not sure if this is router related or not. I simply want the printer to reappear in my network when things are turned back on. The win7 computers said they had successfully installed the printer after I downloaded the latest software from here for win6 64 bit. I did not in fact print anything at the time because they said the printer was found and installed correctly, now the printer cannot be located any longer. HP solution center claims the printer is disconnected, but does nothing to assist in re-establishing a connection. The wizards cannot locate the printer, manually trying to direct the computers to the printer fail. I have set up a PW protected wireless network to try to limit prying eyes and leaches from accessing my network and I wonder if somehow this is messing me up.
I am lost, completely!
In summery:
Dlink DGL-4300 router
Two computers running Win7
One computer running Vista
One laptop running XP
One HP3310 All-in-one printer
When setting up the win7 systems all defaults were selected, I tried to do nothing funny from stock install. Somehow, I still ended up with one computer not being able to access files on Vista computer. None of the computers can see the printer though. (this after powering down all computers and turning them back on when needed, router has not been cycled on and off)
Thanks, hopefully someone can explain this to me. I just do not want to have to reinstall the printer after every time I turn a computer off and back on again.

On many older HP printers the software keeps track of the printer by IP address. If that IP address changes (due to power outage, the printer re-logging on to the router after being moved, etc), the software can have a difficult time finding the printer.
How comfortable are you in configuring your router? First, print a Network Config Page from the front of the printer. We can go from there.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My computer broke down and now i bought a new Mac, how can i get my music back from iTunes??

my computer broke down and now i bought a new Mac, how can i get my music back from iTunes??

Unless you subscribe to iTunes Match , Apple does not keep a backup of your iTunes library. Even then it is not the library as it exists on your computer, but some version of the media, and only media files, not playlists. Even then not all media are definitely available since anything removed from the iTunes Store since you purchased it is not available for re-download.
FAQ: Why iTunes Match Can Not Be Used as a Backup - https://discussions.apple.com/docs/DOC-4112
Using Match as a backup for iTunes - https://discussions.apple.com/message/17039436#17039436
In your case it sounds like you will have to obtain non iTunes purchases from their original source or a backup you may have made at some time in the past.

Can no longer print playlists

Suddenly, I can no longer print playlists for CD jewelcase inserts. I've been printing these with no problem for months and yesterday for the first time, when I select 'print' from the file menuj I get a message saying, " printing of jobs for this printer is stopped."
The printer is also connected to a PC and prints files sent from the PC just fine.
Can someone tell me how to fix this problem?
Thanks
Greg

I had a similar problem a few months ago.
I can't remember the cause however.
Running the latest OS 10.3.9 Combo-update (I was using OS 10.3.9 at that time) and uninstalling the printer and re-installing it eventually solved it.
Because I did two things at the same time (bad habit), I can't tell you what fixed it.
You might read Troubleshooting printing issues in Mac OS X.
If you have 1 printer I would try resetting the printing system: Mac OS X 10.4: About the Reset Printing System feature
This will remove all installed printers.
Then add your printer again.
You are also using the printer for a PC. Is the printer switched or shared?. If shared, you must solve the problem on the computer to which the printer is connected.
If you still can't solve the problem, I suggest you post a question in the Printing & Faxing forum in the Mac OS X v10.4 Tiger category.
There are knowledgeable people posting there, who know way more about printing problems than I do.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Where Do I Find My Printer on my Computer?

This might seem like a dumb question, but where do I find my printer on my computer? I recently installed a new HP laserjet printer and wanted to scan a picture, but I got a scanning error (it said that there was no scanner found). I opened up an icon on the bottom, but the product that it worked with was my old printer which I do not have connected to my computer any more. There was only one option for the printer in the drop down menu. However, I have been able to print out documents and pictures from my new printer. My last printer, an HP inkjet, also gave me an error message whenever I tried to scan something. I want to find the place on my computer where it gives the information of where things are, like the hardware. I know it is on here somewhere as I recently was there, but can't seem to remember how I got there. Thanks for any help. I am looking specifically for help in installing the scanner part of the printer.
This question was solved.
View Solution.

System Preferences and then Printers & Scanners

When I plug in an USB to the usb port my computer shuts down

I bought my macbook air a couple months ago and when I plug in the usb into the usb port my computer shuts down. I dont know why this happens, but is not always, just sometimes.
Does anyone know why this is happening?

Have you tried plugging the flash drive into a different Mac to see if it works? The Air shouldn't have any problem with it, I use a couple of flash drives in mine, although I don't have a pq1. Did you try both USB ports on the Air? Do you have another flash drive you can test in the Air, or a different USB device, like a hard drive or printer?
The only thing I can think of is either a bad flash drive, or a bad USB port on the Air. Sorry, can't be more help than that.

Computer shuts down when burning

Why does my computer shut down when I try to burn my Itunes playlist on a Cd?
Toshiba Satellite

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Computer shuts down when connect FW 400 device

I have a PowerMac G4 dual 1,25 FW800, 1Gb ram and OS 10.4.3.
When I connect a Mcally Firewire 400 hub the computer shuts down immediately.
It does the same thing when I connect a Delkin FW Compact Flash card reader.
I tried different cables on both FW ports.
The devices work well on Powerbook.
Also, I succesfully connect a printer and a LaCie HD to the FW ports of the PowerMac.
Can anyone suggest what the problem might be?
Thank you,
Francesco Tonell

Thanks Ryan
Attached to the PowerMac I have 2 LaCie 500Gb FW800 each with thier power supply + 1 LaCie Mobile 80Gb FW400 without any power supply + and Espon R2400 FW400.
If I conncet my FW400 card reader with any of the two FW400 ports the PowerMac shuts down immediately.
But I found a small workaround. If I connect the FW400 card reader to my LaCie 80Gb and then the LaCie 80Gb to the PowerMac it works fine.
Francesco

Computer Slowing Down (includes EtreCheck)

Hey there!
Yeah, basic question I know. XD But my computer has been getting noticeably slower, especially with Premiere Pro, Photoshop editing and very basic Finder tasks. So, I decided to do a pass with EtreCheck to see if there were any other problems.
And there appears to be quite a few failures... 8C
Thoughts?? Especially on the "Problem System Launch Agents" and "Daemons??"
Thank you!!! 8D 8D 8D
(ALSO... I have been editing together a 3 hour, 4 camera concert, all in 1080p on a maxed out iMac computer, with no problem. I wanted to do some extra editing work on the side with my laptop, but it can't even LOAD the file... XD Granted; it's a 3 hour concert with 4 cameras in HD. Is this kind of work COMPLETELY out of the league with a computer with these specs to begin with? Is it time to upgrade to a maxed out desktop if I want to continue getting work like this?)
EtreCheck version: 2.1.2 (105)
Report generated December 11, 2014 at 10:20:06 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
LCDTV16 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 9 days 13:32:20
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 790 MB
Macintosh HD (disk1) / : 748.65 GB (30.37 GB free)
Core Storage: disk0s2 749.02 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Seagate BUP Slim BL 2 TB
S.M.A.R.T. Status: Verified
iTunes Library (disk5s1) /Volumes/iTunes Library : 2.00 TB (18.96 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Tablet DTZ-1200W
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
[loaded] com.LivestreamProcaster.driver.ProcasterAudioRedirector (2.0.0 - SDK 10.0) [Support]
[not loaded] com.smashart.driver.AirPhonesSpeakers (1.0 - SDK 10.7) [Support]
[not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) [Support]
[loaded] net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.rcd.plist
[failed] com.apple.sbd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AirPlayXPCHelper.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-monthly.plist [Details]
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.wacom.wacomtablet.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.aladdin.aksusbd.plist [Support]
[running] com.aladdin.hasplmd.plist [Support]
[running] com.autodesk.backburner_manager.plist [Support]
[running] com.autodesk.backburner_server.plist [Support]
[loaded] com.autodesk.backburner_start.plist [Support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[loaded] com.ea.origin.ESHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] com.skype.skypeinstaller.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.amazon.music.plist [Support]
[running] com.plexapp.helper.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Dropbox ApplicationHidden (/Applications/Dropbox.app)
ServeToMe ApplicationHidden (/Users/[redacted]/Documents/Macbook/sfpicher/Applications/ServeToMe.app)
Music Manager ApplicationHidden (/Users/[redacted]/Library/PreferencePanes/MusicManager.prefPane/Contents/Helpe rs/MusicManagerHelper.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]
AdobePDFViewerNPAPI: Version: 10.1.9 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobePDFViewer: Version: 10.1.9 [Support]
DirectorShockwave: Version: 11.6.8r638 [Support]
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Slick Savings Adware! [Remove]
Searchme Adware! [Remove]
Slick Savings Adware! [Remove]
Amazon Shopping Assistant Adware! [Remove]
Ebay Shopping Assistant Adware! [Remove]
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Support]
Flash Player [Support]
Java [Support]
MagicPrefs [Support]
MenuMeters [Support]
MusicManager [Support]
WacomTablet [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      10% WindowServer
      1% SystemUIServer
      0% fontd
      0% Dropbox
      0% notifyd
Top Processes by Memory: ℹ️
155 MB Finder
77 MB systemstats
60 MB mds_stores
52 MB mds
52 MB WindowServer
Virtual Memory Information: ℹ️
3.05 GB Free RAM
1.48 GB Active RAM
805 MB Inactive RAM
1.45 GB Wired RAM
120.38 GB Page-ins
2.54 GB Page-outs
Diagnostics Information: ℹ️
Dec 11, 2014, 03:08:21 PM iTunes_2014-12-11-150821_MacBook-Pro.cpu_resource.diag [Details]
Dec 10, 2014, 06:07:21 PM Audacity_2014-12-10-180721_MacBook-Pro.crash
Dec 10, 2014, 08:46:42 AM com.apple.AmbientDisplayAgent_2014-12-10-084642_MacBook-Pro.crash
Dec 10, 2014, 12:42:04 AM discoveryd_2014-12-10-004204_MacBook-Pro.crash
Dec 9, 2014, 07:02:04 PM garcon_2014-12-09-190204_MacBook-Pro.crash
Dec 9, 2014, 05:46:26 PM garcon_2014-12-09-174626_MacBook-Pro.crash
Dec 9, 2014, 04:30:14 PM WindowServer_2014-12-09-163014_MacBook-Pro.cpu_resource.diag [Details]

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My officejet 4500 g510n-z wont print faxes or from copy or scan. It prints perfect from computer.

my officejet 4500g510n-z suddenly wont print incoming faxes, or from copy or scan. It prints perfectly from computer. it also wont print fax reports or test pages. I have tried uninstalling and re-installing with software disc, still no go.what do i need to do please?

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. Let's us 192.168.1.100 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart 6510e will not print wirelessly to computer

Hi I have a HP Photosmart printer, but it will not print to computer wirelessly, I have run all tests I can think of have ptinted off a wireless net work test report that says everything has passed,, signal quality excelent and so on. but when I try to print from the computer I get a message cannot find computer.
I have also down loaded HP print Doctor and run it it says everthing OK would you like to print a test page? click yes "sendind to printer" same message comes up no connection.
can anybody help before I reach for the hammer
Bingham

What router? What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My computer shut down on Friday night, and it was quite hot to the touch.

My computer shut down on its own Friday night and was quite hot to the touch. On Sunday afternoon I booted it up and got an error message that said the cooling fan was not functional. I am a computer technician, so I disassembled the laptop, and then plugged the ribbon cable back in so I could hit the power button and the fan was turning properly. The vents are not obstructed at all.
After I reassembled the laptop, I was able to power it up without the error message and it has been running ok, but I have been watching it closely, checking to make sure I hear the fan running every so often. So far so good.
I also adjusted the HP Cool Sense to maximum cooling.
Aside from perhaps applying some Arctic Silver between the heat sink and the processor, are there any other steps I might want to take before ordering a fan?
If I do need to order a new cooling fan, what part do I need to get?
Product: LW262UAR#ABA
Model: DV6-6135DX
Thanks!

Kallie,
Here's your Service and Maintenance Guide:
HP Pavilion dv6 Notebook PC Maintenance and Service Guide
Page 90
The main steps to cooling are as you have already surmised - a decent application of thermal paste and a fan that works as it should.
The old 902 cooling fan error doesn't apply to this dv6-6000 series. Assuming your BIOS is up to date (nothing new since 9/2011), and your drivers are good, there is nothing else that should be related in that department.
Software & Driver Downloads - HP Pavilion dv6-6135dx Entertainment Notebook PC
Good Luck!
<<<   Click the White Kudos Star on the Left to give “Kudos / Thanks” for the help.
     Please Click “Accept as Solution if I provided the fix for your problem. Thanks!
Always Include: (Computer) Product Number , Printer – Model Number ,
                                   Never give out your Serial Number
                                      2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?

Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent

Printing playlist sloes computer waaaaay down..

Similar Messages

Maybe you are looking for