Printing pre sets not saving

I save photo printing pre sets according to the kind of paper I'm printing on. I use an Epson 2200. I change the print settings and color management and do "save as" Enhanced Matte or Watercolor. When I go to print again Enhanced Matte and Watercolor are still there but the print settings and the color managment settings aren't saved.
iMac G5 Mac OS X (10.4.3)
iMac G5 Mac OS X (10.4.3)

My first time posting something, so I do need to say that I find this forum an invaluable resource, and has always been very helpful.
Thank you so much for responding to my dilemma. The shortcut sets do show up in the Preferences and don't disappear once the shortcut key stops working. What is odd is that my Shortcut Set is still there, but my shortcut commands are gone, so I probably should have stated "shortcut command", instead of "set".
Also, there is somewhat of a mystery going on here, for me, anyhow. I thought I would try one more time before updating to 7.0.4, and for some unknown reason everything is working as it should. I didn't restart or shut down before I left for the evening. So I'm unsure of what was going on.
But thanks again for your responses.

Similar Messages

Desktop setting not saving after system update

Hi All,
I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
not saving my desktop setting. I have the "automatically save session on logout" check.
I am using xfce4 as my DM
any help please.

hi,
check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files

How do I make a printing pre set in Photoshop CS4?

I use Photoshop CS4 and print on an Epson R360. I often print high resolution images, usually jpeg, onto quality Epson paper with certain settings to get the best result. However I am aware that I can set a "pre set" to achieve this without having to make the print spec choices each time but don't know how to do it. I have checked the Adobe website but cannot find any relevant info that I can understand. Can anyone give me a simple guide how to do this please?

In the PRINT dialog box, [see Pic-1], make all the changes that you want,
then [see Pic-2]
SAVES US, name your preset. When you print again, then you just select that PRESET, and all your print specs for the PRESET should all be there. I hope this helps.
Arnel
www.arnelgarcia.com

Configuration setting not saved

hi,
When i receive configuration setting for web beowsing on my mobile from my service provider.I get a message " trusted server setting received but not saved.message could not be authenticated and deleted."So i am unable to browse the web.Please help me .

You seem to have deleted the settings message from your service provider. Contact them and ask them to send it again. This time after you receive it you need to save it and it should auto install. Also sometimes there is a password to save it. If there is, the service provider usually sends you a separate message with with it.

Volume setting not saved

Hello,
My volume settings are not saved when I power-cycle or reset my iMac. I have tried resetting the PRAM, with no effect. In another thread, someone asked me whether my PRAM battery might be getting old; the answer is, probably not, this computer was new as of this January.
One thing that's a little different from my other/previous Macs is that I have a Solid-State Disk (SSD) as startup disk and a standard Hard Drive (HD) for data storage. As recommended by various threads on the subject, to optimize performance while minimizing wear on the SSD, the /Users/xxx directory is on the SSD, but various sub-directories (Desktop, Documents, Downloads, ...) are on the HD. I've noticed that this leads to various odd perturbations (e.g. icons in the Finder sidebar only update when I click on them, can't launch a Parallels virtual machine by double-clicking its icon, ...), but I really don't see how it would be related to my volume settings.
Here's the machine configuration:
iMac (iMac11,3) 27" / 2.93 GHz Intel Core i7 / 16 GB RAM / 251 GB SSD / 2 TB HD
Mac OS X 10.6.8 (10K540)
Boot ROM version: IM112.0057.B00
Any help would be much appreciated!

Thanks for the suggestion. The Library folder is on the SSD, and I don't think the Public folder really has anything to do with this. But I did try moving the Desktop folder back to the SSD; the only thing that changed is that the Desktop icon in the Finder window sidebar is drawn correctly. The volume setting behavior is not changed.
I noticed something else, though: when I increase the volume and restart, the reboot chime is louder. This implies that my volume setting is correctly saved to PRAM, but then something else - during the start-up - cranks it back down. Does anyone have any suggestions on how to track this sort of thing?

Double-Click Setting not saved

Help! On my brand-new MBP 13" the double-click speed is not saved with "Keyboard & Mouse" preferences.
Everytime I log in the double-click speed rate is set to "slow" and as a result many mouse-clicks are considered as "double" without intended to be. After correcting the setting everything works fine ... until the next log-out / log-in.
I already trashed the preference file without success.
Any suggestions? This behaviour is really annoying ...
Matthias
Unibody MacBook Pro 13", Mac OS X 10.5.7 (all patches applied), Apple Wireless Mighty Mouse

Hi guys, I had a similar problem, I found a solution to the problem, so now, go to http://unsanity.com/haxies/ape/, and download this application, then run the pkg, and click on "Uninstall", reboot .... you double-click setting now saving
P.S> Sorry for my English =)

Print Driver Settings Not Saving at Print Dialog [IDCS3, Vista]

Hi. On our only design machine that runs Vista, when the user tries to print something from InDesign CS3 and has to turn on duplexing in the printer driver setup, on clicking OK, those settings immediately go away, and thus the document will not print duplexed. It works fine on our XP machines.
A workaround is to set such printer driver settings via Vista's Control Panel, and this does work, however it's a bit cumbersome, since we print all kinds of documents.
Pertaining Specs:
- Adobe InDesign CS3 (5.0.3) for Windows
- Vista Home SP1 (I think)
- Konica-Minolta Bizhub C500
- EFI Fiery 2.01 Driver for Vista / PostScript / Image Controller 405
It's similar to this issue, but the specs differ:
Michael C Stone, "Indesign documents reset printer settings IDCS2 XPSP2" #, 14 Jun 2008 5:19 pm

It does say, "Double-sided: Yes," in Windows' printer properties for the Bizhub PS (and PCL) Fiery driver(s) -- in fact, this may have been from me turning it on for the PS driver in Windows Registry, as it was off for some reason, but seemed to make no real difference anyway -- but I think the duplexing option would have been grayed-out in the Fiery driver's dialog if not available as some various other options are -- the driver has the capability to poll the device for such options availability -- and I don't actually see anything duplexing-related on the Installable Options tab, but the Installed list is identical to one of our XP computers with no apparent issues with printing to the drivers from InDesign -- although at one point, if a Vista user printed an InDesign document and saved it (and thus the printer settings), XP users for some reason couldn't print the document without forcing a change in the print driver settings, but I believe this was due to using the same drivers but different TCP/IP port configurations per machine (Vista doesn't need the IP_ prefix as XP seems to).

SQL Server Configuration Manager (2012 SP1): "IP All" Setting Not Saving

I have 4 SQL Server 2012 SP1 clusters, and under Network Configuration ->
TCP/IP -> Protocol (tab), I am able to switch
Listen All from Yes to No. However, when I hit
OK (or Apply), I get the message:
Any changes made will be saved; however they will not take effect until the service is stopped and restarted.
OK, fine.
Now, if I re-open the TCP/IP properties, Listen All is back to
Yes.
This happens even after I restart the SQL Server service, and it happens on all 4 instances.
I have checked the version of Configuration Manager - 2011.0110.2100.060. I've compared this with a (non clustered) SQL Server 2012 where I can flip the
IP All field at whim, the versions are the same (as are the SQL Server versions,
11.0.3000.0 Build 7601).
I've also ensured that under IP Addresses, the one that I want to use has
Enabled = Yes, all other IPs have Enabled = No.
Neither BOL nor Google have any useful information for me.
Has anyone seen this before? Bug or WAD (and I'm doing something wrong)?

Hi,
Per
Case 4: SQL Server is installed in a clustered environment:
On cluster, you cannot configure SQL Server to listen on a specific IP addresses. You must chose IPALL. The IP addresses on which the cluster instance will be listening on is determined by cluster resources (configurable through Cluster Administrator,
by adding IP Address resources under SQL Network Name resource).
Here is a workaround:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/318fca7a-58d1-4f11-81dc-1160fde31280/cant-set-listen-all-to-no-in-sql-2008-r2-cluster
Thanks.
Tracy Cai
TechNet Community Support

Vector feather setting not saving

I'm finding that the vector mask feather setting isn't saving, and returns to a hard edge when reopening the files.
I haven't had time to explore this, except that the file is being saved as Max-Compatiple.
should the vector feather settting be saved or is this a temporary setting for creating pixel masks only?
is it a bug or not a bug ( and therefore I need to read the manual )

seems like the message was dropped from the post, here it is.....
I'm finding that the vector mask feather setting isn't saving, and returns to a hard edge when reopening the files.
I haven't had time to explore this, except that the file is being saved as Max-Compatiple.
should the vector feather settting be saved or is this a temporary setting for creating pixel masks only?
is it a bug or not a bug ( and therefore I need to read the manual )

Booklet to PDF print preset settings not saved

I'm using ID CS4 on Vista64 Business and trying to output numerous booklet layouts to PDF for a client to print in-house at their premises. My lo-res tests work perfectly on their printer, I now need to output everything @ 300dpi etc.
I've set up a print preset to use the Adobe PDF printer driver and set all defaults I can find (Control panel etc) to High Quality output.
Interrogating the preset directly reports settings as "High Quality" but when using the Booklet Print dialogue Setup button to check the printer prefs, it always shows (and outputs) "Standard" settings.
Is there a way to get the ID Booklet option to remember the default PDF printer prefs? It's a real pain to change these manually for each print run.
Thanks, any advice gratefully received. [ I'm probably missing something embarrassingly fundamental. ~:o( ]

Hi Peter,
I can only find a printer folder under Control Panel > Printers. This is where I've already changed the PDF Printer defaults without success. Oddly, I appear to have fixed it by renaming the print driver instance there to "Adobe PDFx" (probably any other name would also work).
Whilst troubleshooting, I found I could also see another network "Adobe PDF printer" on another machine. I had a look over the settings there and saw the option "render print job on client machine". This got me thinking I might NOT have been using the LOCAL PDF printer setup and was just fooling myself.
I changed the local PDF Printer name to be certain I could identify it correctly and Hey Presto!, it suddenly started accepting the preset changes. I changed it back to "Adobe PDF" and it reverted back to the "standard" settings and just ignores everything.
It may be a weird Vista 64 security thing, this OS does some very annoying things when trying to access stuff, even though I have master admin privileges.
I'll simply leave the printer name as "PDFx" for now as this is getting the job done.
Thanks for your suggestions.

Use desformat=spreadsheet output Excel,print percent setting not 100%,why?

In version 10.1.2
use desformat=spreadsheet output excel,
Open the excel file,and print view,the print percent lower 100%,
how to set report file,make output excel print view 100%?
thanks for any help!
lind

Be sure you put the heading the same size as your column because otherwise it will not insert the diffent columns in seperate columns in excell

Hide Repeated Key Values Setting Not Saved

Hi Experts,
We are working on BI7. Currently we are changing the Query Properties to display Repeated Key Values. However, whenever we execute the reports, all repeated key values are still hidden. When we return to BEx Designer, the setting is reverted back. Please advise on why this is happening. I am pretty sure we have saved then execute the query.
Any help is greatly appreciated.
Thanks,
Juice

Its some problem with Bex I guess.
Go to RSRT, give your query name and do "Generate report".
Execute it in RSRT and check if its fine.
If its fine in RSRT it should reflect in your analyzer too.
Hope this helps.

Versions Set not saving in Organizer 9

Using Organizer and PSE 9 on a Mac, about 13,000 photos in single catalog.
Had been using Versions Sets with no problem, but now the edited image is not being added to the version set. It works okay if I do the edit in Organizer - the edited version saves in version set. But if I go out to PSE for edits and save edited version, a version set is not created. Using Save command in PSE and the "Save as Version Set with Original" box is checked. Have closed Organizer and reopened, also ran the repair catalog in Organizer, but no change.
Thanks,

Same issue here. Some files it works, some not. I cannot find any elements that would be causing this. I thought the file name could be too long, or contain special characters, but I have been able to make it work in some cases.
I'm not sure forums are monitored so I guess we're just out waiting for an update that would miraculously correct this...
In the mean time, when you do edit within an album, the edited files gets added to the catalog but not to the album, which is left with just the original. Very unuseful...
In the hope that someone will find a solution to this.

Norton Privacy Setting not saved

My Firefox 8.0 privacy settings are not working. I am using Norton Internet Security 2012 V19.2.0.10. I have tried deleting pref.js with no success I have also set Norton to allow Firefox in Program control. Still no success.

Hi Mate,
The last I heard, Norton isn't compatible with the new version of Firefox. I'm also a Norton user and disappointed with this, but it's not something Firefox can help us with. We have to go to the Norton site and ask them to make the program compatible with the new Firefox version. I'm going to do this, but I suggest others do this, too so they can take this seriously.

Print Settings are not saved on IE8

Hi,
I have an issue with IE8 on WinxP. One of the Team prints envelopes from a web based application. But the settings wont stay for the print immediately as advised below.
Users need to select a certain size of envelope every time they print via web-based application (Internet Explorer). We are trying to resolve the issue so that Internet Explorer remembers
their last selection. They are currently selecting DL Envelope each time they print.
Ozescribe(the application) initially wanted us to change the driver on the server to resolve the issue. We changed the driver but the issue still remains. The original driver has been put back.
Please advise of any better solutions

Hi,
try tools>ActiveX Filtering (or click the blue circle icon that appears in the Address bar)
contact http://ozescribe.com/ (phone numbers and address at bottom of the landing page)
their web page is incorrectly detecting the installed Adobe Flash version.
Content on this page requires a newer version of Adobe Flash Player. - See more at: http://www.ozescribe.com.au/#sthash.Q2NpsoA4.dpuf
when asking a question please include the Full address of any websites you are having issues with.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com
Rob^_^

Printing pre sets not saving

Similar Messages

Maybe you are looking for