Printing prefs - using "VDP" and "Media" tabs

I have come across an issue where I need to use both of these prefs when printing to a RIP that holds my "master". For some reason, I can not select a "master" under the VDP tab and at the same time define a page range under mixed media. (it tells me I can not use both)
My final goal (to clarify) is to have the 150 page variable data document alternate between 2 paper trays on my printer while also using the 2 page "master" file I saved to the RIP. I need page 1 of the master to merge with 1,3,5,7,9etc.. and to use tray1 while page 2 of the master merges with 2-4-6-8 etc...and use tray 2 on the printer.

InDesign doesn't have a "VDP" or "Media" tab as part of its print dialog. What printer/RIP are you using? Sounds like something you need to discuss with your printer vendor who apparently supplied a fairly sophisticated driver.
- Dov

Similar Messages

I do not have the people and media tabs to allow me to import photos from my iPhotos ,i only have the elive, quick, guided and expert tabs, can anyone help please?

Hi,
Im having problems importing from my iPhotos, i just bought photoshop elements 13 and mac book at the same time and am on a bit of a learning curve, i noticed that on all tutorials there were People and Media tabs which i cannot see, all i can see is elive, Quick, Guided and Expert, can anyone please help?
Many Thanks In advance
Nicol

Elements consists of two separate but interrelated programs: the editor, where you work on your photos, and the organizer, which you can use to organize them. You are looking in the editor. To see the organizer, click the organizer button in the welcome screen or at the bottom of the editor.
Now, do you want to keep your photos in iphoto or in the organizer? That's a choice you must make, sooner or later. The organizer does include a get photos from>iphoto command, but that will copy all the photos in your iphoto library to a new location and make organizer databases for the copies. Is that what you want to do, or do you want to use iphoto to organize your photos, in which case you would not use the PSE organizer?

Verdana Font not printing properly using Vista and Acrobat Pro v8

Has anyone got any ideas as to how I can fix this problem. When I send a word doc to the pdf printer that is all in verdana font it prints out gibberish, however, if in aerial or times new roman thats fine. I'm using Vista and printing via a terminal server.

S.D.A
I'm sorry but I'm not if the font is embedded as I expect it is, as I have no problem printing the font on various personal computers I use. However, the user that I am trying to support is having problems.
Previously when we were using Windows XP Pro and Acrobat Pro v8 and the user had no problems printing over the LAN. We recently moved and ugraded our systems to Windows Server 2008, Windows Vista and printing via Terminal Services. The fault may lie with the pinter drivers not being installed on the Terminal Server, but I'm not sure I just need someone to confirm they have had the same problem and how they fixed it.
Any suggestions would be greatful.

Printer only uses Freehand and Corel Draw

We want use a printer in China that only uses Freehand and
Corel Draw software (very primitive, I know). Is there a way to
export InDesign files to work in either of those
applications?

It depends what you mean by 'Convert'. If you just want to be
able to import into FreeHand (which version - MX?) you could save
as an EPS. If you want to be able to edit... it could be a
struggle. I tried this: From InDesign - save an EPS. Open the EPS
in Illustrator CS2 and save as an illustrator 8. FreeHand will then
open the Illustrator 8 file - it is editable BUT the text boxes get
broken down into many smaller ones.

I can no longer open a new tab by clicking on it or by using file and new tab menu, so what do I change or reset for new tabs to work?

The tabs were working fine, but now tabs will not open when I click on the 'open a new tab + ' button, or if I go to 'file, new tab'. A new tab only opens when I click a link, but I cannot open a tab at will to start a new page. I used your troubleshooting data, but it did not help. I checked tabs settings in Options and all is checked, and I even reinstalled firefox. What do I do to reset or change settings so the tabs will open?

There is a reported incompatibility between the Ask Toolbar and Firefox 3.6.13 that causes new tabs to not open. This problem needs to be fixed by Ask; they need to update their toolbar add-on for Firefox. Until the incompatibility is fixed by Ask, you can disable the Ask Toolbar or un-install it from your system.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**'''''Security release version 11.5.9.620 released 2011-02-08'''''
*Shockwave Flash 10.1 r85
**Several updates behins
**'''''Security release version 10.2.152.26 released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security release version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Can't print remotely using foxfire and can on internet explorer is norton security blocking foxfire

when i try to print on hp printer, won't print. it prints using internet explorer. is it because i have norton security and foxfire is blocking it?

Hi,
Like Rob said, please ask this problem in MSDN forum for more professional help:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=windowsaccessibilityandautomation
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

"Quality and Media" not displaying in Print dialog.

I am using Mac OS X 10.6 Snow Leopard on a Macbook Pro with a Canon MB5220 Multifunction printer over WiFi. I have installed the Canon Drivers and can print to the printer but the "Quality and Media" menu choice does not display in the print dialog so I can't set any of the quality settings or the color settings for the printer.
I installed and re-installed the drivers. Tried with several applications such as TextEdit and preview. Only menu choices are Layout, Color Matching, Paper Handling, Cover Page, Scheduler.
Is there anything that would keep Quality and Media from dispaying?

It's not just the Quality & Media menu that appears to be missing. There are three other Canon menus you should see like below;
These menu items are supported by the plugins bundle installed in /Library/Printers/Canon/BJPrinter/PDEs, which supports a number of Canon inkjet printers. Since reinstalling the driver for the MG5220 has not helped then I would try a reset of the printing system and then adding the printer again. To reset the printing system, open Print & Fax, move the mouse over the Printers list and Control-click. The reset popup will appear. Select it and authenticate if prompted and then restart the Mac. Please note that this action will remove all printer and scanner queues from Print & Fax, but not the associated drivers so just the queues will need to be added again.
If this action does not resolve the problem then try running the Canon Driver Update v2.6.

What current hp printers use 350 and 351 ink cartridges ?

I have a Photosmart C 4480 all-in-one printer (2 years old) and am using Windows XP (home version).   My printer has developed problems which do not seem solvable.
Problem is I have a large stock of ink cartridges 350 and 351 for this printer.
Would prefer to find new HP printer which uses 350 and 351 cartridges.    Are there any ?
Have tried checking HP website but there is no info under 'product spec' what type of cartridges are used.
There is also added problem in that, looking at e-Bay or Amazon, there is not much info provided about type of cartridge used on any printer for sale.
In addition I have a horrible feeling that HP may use different model numbers for different countries.    I'm in France and cannot find any French HP printers which appear to use 350 and 351 cartridges.
Any help to guide me through this muddle would be very much appreciated.
Regards tifossie
This question was solved.
View Solution.

Hi there, it may be difficult to source a new HP inkjet printer that will take those cartridges as they were released in 2007. Here is a list of models that should accept those cartridge selectability numbers.
HP Deskjet D4260 Printer (CB641A)
HP Deskjet D4360 Printer (CB700A)
HP Officejet J5780 All-in-One Printer (Q8232A)
HP Officejet J6480 All-in-One Printer (CB029A)
HP Photosmart C4280 All-in-One Printer (CC210A)
HP Photosmart C4385 All-in-One Printer (CC281A)
HP Photosmart C4480 All-in-One Printer (Q8388A)
HP Photosmart C4580 All-in-One Printer (Q8401A)
HP Photosmart C5280 All-in-One Printer (Q8330A)
HP Photosmart C5580 All-in-One Printer (Q8341A)
HP Photosmart D5360 Printer (Q8361A)
You're best chance may be finding one on eBay but satisfy yourself that it is a new nuit and not a previously used one from antoher part of the world as it may not accept your 350/351 supplies as they are the EMEA regionalised version of these supplies.
Best of luck.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Media Tab Missing in Publishing Site

Hello
I have a Publishing site created with the Publishing template. I edit the default.aspx page of the site and click 'Add a Web Part', I then select Media and Content and pick the Media Web Part. I then edit the web part, but I don't see the 'Media Tab' in
the ribbon.
I tried creating a new page but it still didn't show.
Does anyone have any ideas why this is not working?
Thanks for any suggestions.
Yoshi

Hi Yoshi,
I tried reproducing the issue in my SharePoint Server 2013 by creating a site collection of Publishing Portal. Then I created a new page, and inserted a media web part. When I click on the web part, WER PART tab and MEDIA tab were both shown in the ribbon.
Then I tried any possible reason, I deactivated publishing feature in site feature, then the media tab still existed. After I deactivated the publishing feature in site collection feature. The media tab disappeared and all ribbons in WEB PART tab greyed
out.
I’d recommend you check the if publishing feature is activated in site collection feature and site feature. Could you edit this media web part properties? Did the issue occur in other site collection with publishing feature activated? Did the issue occur
with admin permission?
Regards,
Rebecca Tu
TechNet Community Support

Problem with canon mx870 printer in Word insists on using inkjet Hagaki media type

My MX870 insists on using inkjet Hagaki media type in Word and printing with standard quality, no matter how many times I change it back to plain paper and fast quality. I have tried everyhting I can think of short uninstalling and reinstalling the printer software. I have chnaged documents, closed and reopened word, change printer setting in Control Panel (Windows 7), powering off and restarting the printer, restarting my laptop, etc.
Even more annoying is that in Word my cursor now is a constantly blinking hourglass which has slowed down Word's speed.

Hello.
Please try the following adjustment to see if we can resolve your issue:
1. Close all programs that are open.
2. Click Start and open the Control Panel.
3. Open Printers or Devices and Printers.
4. Right-click the MX870 and choose Preferences or Printing Preferences.
5. In the Main tab, click the 'Defaults' button at the bottom.
6. In the Page Setup tab, click the 'Defaults' button at the bottom.
7. Click Apply and OK.
Once this has been done, open your document and try printing again.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to fix privacy and extensions tab that are blank (using Safari 5.1.7)

I have looked at the help provided in this forum for fixing the privacy and extension tabs that happen to now be blank. However, being new to a mac, I was not able to follow those instructions. If anyone can give me some help/guidance, I would really appreciate it. Also, what exactly does the privacy tab do? If it has been blank for a while and I have been to websites and used my credit card information was it secure? Thanks so much in advance for any/all help. TAD

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Another problem with using canvases and scrollviewers in tab

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
namespace WPFDynamicTab
 /// <summary>
 /// Interaction logic for MainWindow.xaml
 /// </summary>
 public partial class MainWindow : Window
 private List<TabItem> _tabItems;
 private TabItem _tabAdd;
 // private Canvas canvas1;
 public MainWindow()
 try
 InitializeComponent();
 // initialize tabItem array
 _tabItems = new List<TabItem>();
 // add a tabItem with + in header
 _tabAdd = new TabItem();
 // canvas1= new Canvas();
 _tabAdd.Header = "+";
 _tabAdd.MouseLeftButtonUp += _tabAdd_MouseLeftButtonUp;
 _tabItems.Add(_tabAdd);
 this.AddTabItem(); // add first tab
 // bind tab control
 tabDynamic.DataContext = _tabItems;
 tabDynamic.SelectedIndex = 0;
 catch (Exception ex)
 MessageBox.Show(ex.Message);
 private TabItem AddTabItem()
 int count = _tabItems.Count;
 // create new tab item
 TabItem tab = new TabItem();
 tab.Header = string.Format("Tab {0}", count);
 tab.Name = string.Format("tab{0}", count);
 tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
 // add controls to tab item, this case I added just a canvas
 ScrollViewer scrollview1 = new ScrollViewer();
 Canvas canvas1 = new Canvas();
 canvas1.Name = "canvas1";
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
 Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
 scrollview1.Height=200;
 scrollview1.VerticalAlignment = VerticalAlignment.Center;
 canvas1.Height=400+400*count;
 scrollview1.Content = canvas1;
 tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
 // insert tab item right before the last (+) tab item
 _tabItems.Insert(count - 1, tab);
 return tab;
 private void _tabAdd_MouseLeftButtonUp(object sender, MouseButtonEventArgs e)
 TabItem newTab = this.AddTabItem();
 // clear tab control binding
 tabDynamic.DataContext = null;
 // bind tab control
 tabDynamic.DataContext = _tabItems;
 tabDynamic.SelectedItem = newTab;
 private void Canvas_Paint(ref Canvas canvas1)
 int count = _tabItems.Count;
 switch (count)
 case 0:
 canvas1.Background = Brushes.Green;
 break;
 case 1:
 canvas1.Background = Brushes.Red;
 break;
 case 2:
 canvas1.Background = Brushes.Blue;
 break;
 case 3:
 canvas1.Background = Brushes.Yellow;
 break;
 case 4:
 canvas1.Background = Brushes.Brown;
 break;
 case 5:
 canvas1.Background = Brushes.Orange;
 break;
 case 6:
 canvas1.Background = Brushes.Olive;
 break;
 default:
 break;
 private void tabDynamic_SelectionChanged(object sender, SelectionChangedEventArgs e)
 // this is a dummy method
and the xaml
<Window x:Class="WPFDynamicTab.MainWindow"
 xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
 xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
 Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
 <Grid>
 <TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
 <TabControl.Resources>
 <DataTemplate x:Key="TabHeader" DataType="TabItem">
 <DockPanel>
 <TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
 </DockPanel>
 </DataTemplate>
 </TabControl.Resources>
 </TabControl>
 </Grid>
</Window>
The program does the job but there are 2 questions. I am using a scrollviewer and each time the tab increases the canvas size increases and this is reflected in the scrollview bar getting shorter.
Question 1)
I set the scrollview1 height to 200 ,which was obtained by trial and error, increasing causes the extents to go outside the box etc,
the window height was 300 , is it possible to automatically set the scrollviewer height.
Question 2)
Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Note: the relevent code to the above questeions is between XXXXX... and YYYY...

>>the window height was 300 , is it possible to automatically set the scrollviewer height.
You should not specify an explicit height if you want an element to fill the available space. Just set the VerticalAlignment property to Strecth (which is the default value for a ScrollViewer:
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
>>Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Well, you could define the ScrollViewer, i.e. the root element, as a resource and then add access it from the AddTabItem() method like this:
<Window x:Class="WPFDynamicTab.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
<Window.Resources>
<ScrollViewer x:Key="sv" x:Shared="false">
<Canvas Height="800">
</Canvas>
</ScrollViewer>
</Window.Resources>
<Grid>
<TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
<TabControl.Resources>
<DataTemplate x:Key="TabHeader" DataType="TabItem">
<DockPanel>
<TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
</DockPanel>
</DataTemplate>
</TabControl.Resources>
</TabControl>
</Grid>
</Window>
private TabItem AddTabItem()
int count = _tabItems.Count;
// create new tab item
TabItem tab = new TabItem();
tab.Header = string.Format("Tab {0}", count);
tab.Name = string.Format("tab{0}", count);
tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
// add controls to tab item, this case I added just a canvas
ScrollViewer scrollview1 = this.Resources["sv"] as ScrollViewer;
Canvas canvas1 = scrollview1.Content as Canvas;
canvas1.Name = "canvas1";
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
It may not provide that much benefits in this scenario though since you are setting the height and the background of the Canvas dynamically but it is indeed possible.
Hope that helps.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Newbie - External Monitoring and Media Prefs

i have a black magic card. I had gotten premier to send a signal via hdmi to my external 27inch monitor but it has just quit. At one time it would send the source monitor A/V but not the timeline.
What is the correct set up so that i can make PP default to sending the stream to the external on every project?
Also who do i set premier to dual screen editing?
In premier preferences under the media tab i see the intermediate media timebase is set to 29.97fps drop-frame. The footage i am using is 720p60.
Does this effect how Premier is handling my source footage? If not what does the window effect?

What is the correct set up so that i can make PP default to sending the stream to the external on every project?
There is no way to set this on a project basis; it's per sequence. You must use one of the Blackmagic sequence presets to enable external monitoring from a sequence.
Also who do i set premier to dual screen editing?
I'm not positive, but this should be possible with the BMD card. However, setting up two desktop monitors is an OS setting, not necessarily a Premiere Pro setting. As long as you can expand your desktop over two monitors, you should be able to set up Premiere Pro and its various frames and panels to utilize both monitors. This is independent of full-screen external monitoring through the BMD.
In premier preferences under the media tab i see the intermediate media timebase ... Does this effect how Premier is handling my source footage? If not what does the window effect?
That dictates (or is supposed to, anyway) how imported media that does not have a specific timebase/frame rate should be handled on import. As far as I'm aware, this only affects image sequences--I've never seen it have any influence on an imported video or audio file. Even if it's set wrong when you import an image sequence, you can reinterpret the image sequence once it's in your project. Simply right-click it and select Modify > Interpret Footage. If you don't use image sequences, I think you can safely ignore this setting.

Black & White printing using Acroread and Pasta

Hi,
We have Acroread at the Unix server end and the printer is configured to "--PASTA Universal Printer Type".
Presently we are able to print the PDF output of the BI Publisher reports generated by Oracle concurrent programs but those are coming in Color mode.
Can anyone please advice how to get the output in the printer in Black and White mode.
Thanks,
Pranit.

I have a new Canon printer and find it is swallowing up the small black ink and not using the large black ink container. I tried printing in gray scale, but that also seems to use up the small black ink container. What settings should I use. e.g. Color Sync (Quartz filter, black and white or None???), Quality and Media (gray scale???), color options (color correction, None????) and any other thoughts???
Thanks.
eMac Mac OS X (10.3.9) Canon printer MP830

9500 Mark II Printer and Photoshop (Mac) Quality and Media Grayed Out

I have a PIXMA 9500 Mark II. I am using the printer on an iMac. In Photoshop, when I choose Quality and Media, the area to choose paper type and tray are grayed out. It work fine in Safari.
I have spoken to Canon, Apple and Adobe and no one seems to be able to get it to work. It works in Safari.
Any suggestions?
Thanks

Hello larrygm.
Unfortunately, if you continue to have difficulties with accessing the printer settings, we would have to advise that you use our Easy PhotoPrint Pro plugin with Photoshop or print the image using a different program.
The Easy PhotoPrint Pro plugin can be downloaded from our website and is compatible with most versions of Photoshop. Once installed, you can access the plugin from the File/Automate menu of the program.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printing prefs - using "VDP" and "Media" tabs

Similar Messages

Maybe you are looking for